Modification of ferrite–manganese oxide sorbent by doping with cerium oxide

Fe–Mn oxide and Ce-doped Fe–Mn oxide sorbents were studied on the structural and desulfurization behavior in COS removal from syngas. The effects of cerium oxide on the Fe–Mn oxides have been investigated by XRD, BET, TPR, XPS and TEM methods. Analysis data show that the Ce-doped sorbent has larger specific surface area and better particles’ dispersion compared with non-modified Fe–Mn sorbent. The addition of Ce improves the reduction performance of Fe–Mn species. The desulfurization experiments show that the desulfurization activity of sorbent can be increased because of the promotion of the structural and redox properties by ceria doped. The Ce-doped sorbent can reduce COS from 15,000 ppmv to less than 0.1 ppmv at 325 °C and a space velocity of 1000 h⁻¹.     

影响煤矿作业人员不安全行为的因素

本文论述了如何预防和消除煤矿作业人员的不安全行为,克服职工不健康的心理状态,改善作业环境,实行作业标准化和对作业人员的技能培训。     

湿度传感器在防护性能检测中动态湿度的测量方法

1引言 防护装备在核、生、化环境下起着防放射性灰尘、防生物细菌和防化学毒剂的作用。防护装备的防护性能检测准确与否。直接影响着防护装备产品的质量乃至使用者的生命安全。防护装备的防护性能受湿度的影响很大,以前,在防护装备的防护性能检测过程中是利用干、湿球温度计来检测测试管路中的湿度。     

一种湿度计的校准方法——测量不确定度分析校准法

本文提出了校准湿度计的一种新方法一测量不确定度分析校准法,以利用5121湿度发生器校准可输出（0-5）V的湿度传感器的基本误差为例,介绍了其校准方法确定了该方法校准湿度计的置信度和准确葭：     

水体环境中氟喹诺酮类药物的污染现状及分析方法

阐述了水体环境中的氟喹诺酮类（FQs）药物的来源和污染现状,介绍了FQs在水体环境中的迁移、转化和转归途径,归纳了各种当前使用较多的FQs分析检测方法的功能特点和适用条件。指出今后在FQs分析技术的开发上,应注重提高检测容量、降低检出限和削减环境负面影响因素。     

TiO2-xNx光催化氧化苯甲酸的研究

采用悬浮态光催化反应体系,以氙灯为光源,自制纳米TiO2-xNx为催化剂,考察了苯甲酸光催化氧化过程中TiO2-xNx质量浓度、反应体系初始pH和苯甲酸初始质量浓度对苯甲酸溶液中TOC去除率的影响。实验结果表明：最佳催化剂质量浓度为0．30g／L;TiO2-xNx的等电点为pH=5．3,在酸性条件下（pH=2．0）更有利于苯甲酸在催化剂表面的吸附,以及光生电子与O2反应生成·OH的进行;随苯甲酸初始质量浓度增加,TOC去除率降低,反应速率也相应地降低。TiO2-xNx比P25型TiO2表现出更强的浓度适应能力。     

电源变压器温升试验中（绕组法）的影响因素及不确定度的评估

本文中探讨的是根据绕组法计算电源变压器绕组温升的试验方法,以及对整个试验过程中环境、仪器设备、仪表、人为因素所引起的误差等对最终试验结果的影响,并对其测量不确定度进行评估。     

烟气脱硝技术及在我国的应用

氮氧化物气体是危害最大、最难处理的大气污染物之一。随着经济的发展,有效控制燃煤造成的大气污染已经刻不容缓,特别是控制燃煤过程中的氮氧化物,烟气脱硝技术显得相当重要。本文分析了几种常用的烟气脱硝技术（选择性催化还原脱硝技术、选择性非催化还原脱硝技术、碱性溶液吸收法和等离子体活化法等）的原理、技术特点以及在我国的应用情况。     

Different reaction mechanisms of diphenylether and 4-bromodiphenylether with nitrous acid in the 355 nm laser flash photolysis of mixed aqueous solution

The microscopic reaction mechanisms of diphenylether (DPE) and 4-bromodiphenylether (4-BrDPE) with nitrous acid (HNO(2)) in the absence of O(2) have been explored by the 355nm laser flash photolysis. It was proposed that OH radical, from the photolysis of HNO(2), added to DPE forms the C(12)H(10)O-OH adduct while added to 4-BrDPE forms the 4-BrDPE-OH and 4-BrOH-DPE adducts. The first-order decay rate constants of the C(12)H(10)O-OH adduct, 4-BrDPE-OH adduct and 4-BrOH-DPE adduct were measured to be (1.86+/-0.14)x10(5)s(-1), (2.19+/-0.04)x10(5)s(-1) and (1.56+/-0.03)x10(5)s(-1), respectively. The final photolysis products of DPE and HNO(2) identified by GC/MS analysis were phenol, o-hydroxydiphenylether, p-hydroxydiphenylether and p-nitrodiphenylether, while the final photolysis product of 4-BrDPE and HNO(2) identified by LC/MS analysis was mainly the dimer.