A Comparative Study of Particulate Loadings in Plumes Using Multiple Sampling Devices

Particle size distributions, particulate concentrations, and particle identities must be known to relate effluents to reduction in visibility and soiling. Similar types of emissions were measured with cascade impactor, membrane filter, and rotorod samplers. The different particle size distributions, concentrations, and identifications are reported. Discussion of and recommendations for utilization of these three methods of sampling are made.     

Recent Electrostatic Precipitator Experience with Ammonia Conditioning of Power Boiler Flue Gases

Motivated by heightened recent interest, Koppers Co. has been experimenting with ammonia conditioning of power boiler flue gases for the purpose of improving the precipitability of the emitted fly ash. Chemical reactions resulting from ammonia injection are postulated. Measurements on three pulverized coal and two cyclone fired boilers, all of which emit acidic ash, are described. In all five cases, considerable but varying, increase in precipitator power input and collection efficiency resulted when gaseous ammonia in the amount of 1 5 ppm was injected between the economizer and air preheater. The conditioned fly ash showed decreased acidity and inconsistent change in electrical resistivity. Unless air heater temperatures were unusually high (>400°F), tendency of the air heater to plug was an additional, but unwanted, result. At one station with high air heater outlet temperature ammonia injection has been adopted as a permanent solution to community pressure for reduction of stack discharge. Ammonia injection downstream of the air heater produced no effect. Future plans are presented to continue the program beyond results described here.     

A Model for Gaseous Pollutant Sorption by Leaves

A model simulating pollutant exchange with isolated leaves that integrates factors which have been found to be important in regulating pollutant uptake by leaves is presented. The model is patterned after an electrical analogue simulator and was designed to emphasize the effects of pollutant and leaf properties on the process. The article discusses the relative significance of factors affecting gas transfer, sorption of pollutants by leaf surfaces, and pollutant solubility and fate on the uptake process. Data is presented showing uptake of ozone by exposed mesophyll and several epidermal surfaces chosen for their different surface characteristics. The model was used to derive a mathematical expression for the exchange process which was rearranged to define internal (average) pollutant solute concentration in terms of external concentration, leaf and boundary layer diffusion resistance, surface sorption and pollutant solubility. The importance of estimating internal solute concentration is discussed.     

Determination of Oxides of Nitrogen in Combustion Effluents with a Nitrate Ion Selective Electrode

The nitrate ion selective electrode was investigated as an alternative approach to the present colorimetric determination of nitrate resulting from oxidative absorption of nitrogen oxides from combustion effluents. The electrode offers advantages of speed and relatively simple experimental procedure. Replicate measurements of 10^?4–10^?2M nitric acid solutions using bracketing standards show that the electrode approach is capable of good precision (coefficient of variation = ±4%). Comparison of a method utilizing the nitrate electrode with the more laborious phenol disulfonic acid method for the measurement of nitrogen oxides in both oil and gas fired combustion effluents showed agreement within 4% of the mean even in the presence of high levels of SO₂. The correlation coefficient found for PDS vs nitrate electrode is 0.987.     

Sulfur Dioxide Fumigation of Soybeans: Effect on Yield

In order to determine the influence of SO₂ fumigation of soybean plants on yield, a three-year experiment was conducted on 485 plois of soybeans. Single fumigations of S0₂ were applied at 10 different stages of growth in 1968-69 and 7 stages of growth in 1970. A linear relationship was found to exist beiween the percent of leaf area destroyed and ihe percent crop loss with a significant regression coefficient of b = —0.659, or iwo-thirds of one percent crop loss for each percent of area destroyed. No definite significant stage-of-growth effect was found and no treatment effects were significant for the early stages of growth from the 3-leaf to the 15-leaf stage, nor was there any loss in yield without visible leaf injury.     

Absorption of Gaseous Air Pollutants By a Standardized Plant Canopy

Concentration profiles for hydrogen fluoride(HF), sulfur dioxide(SO₂), ozone (O₃), nitrogen dioxide(NO₂), and nitric oxide(NO) generated in a standardized alfalfa canopy are presented. Wind, light, temperature, and carbon dioxide(CO₂) profiles, canopy pollutant uptake rates, and canopy structural data are also given. Canopy pollutant concentration profile characteristics were studied to evaluate the relative potentials for major air pollutants to penetrate into canopies. The study was conducted in an environmental growth chamber equipped to control automatically environmental conditions and monitor continuously gas exchange rates. HF, SO₂, and NO₂ profiles suggested that these gases were removed efficiently by the upper portion of the canopy as well as by the immediate subsurface vegetation. The steady state HF profile showed the greatest displacement within the canopy. The NO profile was displaced the least. The uptake rate of NO by plants was apparently too slow in comparison with gas transport and mixing within the canopy to affect the internal profile substantially. O₃ appeared to be readily deposited on the surface tissues, but the deeper tissues in the canopy had less effect on the concentration profile. Data are also presented to show the relationship between NO₂ concentration within the canopy and changes in the air concentration above the vegetation. The results indicated that gas transport between the atmosphere and canopy interior was rapid. The data presented should be of current interest to agriculturists, researchers, administrators, and environmental planners concerned with effects of air pollutants on plants and on the fate of pollutants in the microenvironment.     

Jet Aircraft Operations: Impact on the Air Environment

This paper is directed to those concerned with the air environment and its degradation by the burden of pollution from jet aircraft operations. A summary is presented of the results of a comprehensive air pollution study of jet aircraft operations at the Los Angeles International Airport (LAX). Included in the data obtained from this study are jet engine exhaust measurements for currently used turboprop, turbojet and turbofan engines; measurements of specific contaminants in the atmosphere inside and outside of passenger terminals and ticketing areas, and in aircraft cabins during ground operations including passenger loading and taxiing prior to takeoff; also presented are ambient air measurements in a two-mile radius of the airport. An evaluation is made of the emissions of contaminants from air transport operations and all related ground activities including motor vehicles, that contribute to the total atmospheric contaminant burden at the airport.     

Evaluation of the Effectiveness of The Lead Peroxide Method for Atmospheric Monitoring of Sulfur Dioxide

This paper presents a simplified analysis to determine the variables that affect the empirical correlation factor used in the lead peroxide method. The rate of sulfation has been determined from two different models. In the first model, the mass transfer rate is calculated from the gas phase resistance alone whereas in the second model, the diffusion resistance in the gel phase is assumed to be the rate limiting step. Although the gas phase and the gel phase resistances may be both important in the actual case, it has been found that the correlation factor based on the first model is adequate to describe general experimental observations. Reasonable agreement has been obtained between the measured and the calculated va|ue of the correlation factor.     

The Formation of Mg3Ca(S04)4 during the Sulfation Reaction of Dolomite

Abstract

Inspection and maintenance programs for motor vehicles in the United States increasingly use loaded mode mass emissions testing (IM240). A method was developed to predict mass emission rates and mass emission changes, particularly from repair benefits, using a low-cost, portable four-gas non-dispersive infrared (NDIR) vehicle exhaust gas analyzer. A single vehicle was tested several times with the analyzer while on the dynamometer and undergoing successive repairs. Excellent correlations for CO and HC were observed. Five vehicles were measured using an on-road driving loop before and after emissions-related repairs, while another three vehicles were tested with no repairs performed. The on-road concentration data used to guide the repair process were converted to grams per gallon; when divided by estimated miles per gallon, this gave grams per mile emissions for comparison to IM240. Correlation coefficients (r²) of 0.87 for CO and 0.76 for HC were achieved for the 13 tests. The linear correlations between IM240 and emissions measured by this method would allow repair facilities to perform a relatively inexpensive test for diagnostic purposes and to estimate repair effectiveness without the need for a dynamometer.