Effect of mecoprop drift on some plant species of conservation interest when grown in standardized mixtures in microcosms

There has been an increasing awareness of potential impacts of herbicide drift on to vegetation in nature reserves and field margin habitats adjacent to treated areas. Previous work using single species bioassays has suggested that the effects of a single drift event are confined close to the sprayer (< 10 m). In the present study eight native dicotyledonous species, with and without a perennial grass (Lolium perenne), were grown in standardized microcosms in order to study (1) the effects of herbicide drift where plants were exposed to competition, and (2) the effects of a second spray application. The microcosms were arranged downwind (0-8 m) of a standard agricultural sprayer applying mecoprop at recommended rates. The effects of the herbicide drift on foliar symptoms of plant damage and end-of-season yield were assessed in each of two years. The main conclusions were that (1) growth of Stachys sylvatica and Lolium perenne (where sown) was enhanced near the sprayer and, (2) six other species (Digitalis purpurea, Galium mollugo, Hypericum hirsutum, Lychnis flos-cuculi, Primula veris and Ranunculus acris) showed some evidence of reduction in either performance (assessed non-destructively after a single exposure) or yield after two exposures. Three species (Lychnis flos-cuculi, Primula veris and Ranunculus acris) showed a reduction in flowering performance. Thus, mecoprop drift affected the aesthetic appearance, possibly the fecundity of some species and the balance between species in these microcosm experiments. The implications of these results for the persistence of attractive plant communities in sensitive areas are discussed.     

Recycling of petroleum-contaminated sand

The environmental impact of using petroleum-contaminated sand (PCS) as a substitute in asphalt paving mixtures was examined. An appreciable component of PCS is oily sludge, which is found as the dregs in oil storage tanks and is also produced as a result of oil spills on clean sand. The current method for the disposal of oily sludge is land farming. However, this method has not been successful as an oil content of < 1% w/w is required, and difficulty was encountered in reaching this target. The reuse of the sludge in asphalt paving mixtures was therefore considered as an alternative. Standard tests and environmental studies were conducted to establish the integrity of the materials containing the recycled sludge. These included physical and chemical characterization of the sludge itself, and an assessment of the mechanical properties of materials containing 0%, 5%, 22% and 50% oily sludge. The blended mixtures were subjected to special tests, such as Marshall testing and the determination of stability and flow properties. The experimental results indicated that mixtures containing up to 22% oily sludge could meet the necessary criteria for a specific asphalt concrete wearing course or bituminous base course. To maximize the assay from the recycled material, the environmental assessment was restricted to the 50% oily sludge mixture. Leachates associated with this particular mixture were assayed for total organic residue and certain hazardous metal contaminants. The results revealed that the organics were negligible, and the concentrations of the metals were not significant. Thus, no adverse environmental impact should be anticipated from the use of the recycled product. Our research showed that the disposal of oily sludge in asphalt paving mixtures could possibly yield considerable savings per tonne of asphalt concrete, and concurrently minimize any direct impact on the environment.     

Follow-up to environmental impact assessment: Learning from the Canadian Government experience

The environmental impact assessment procedure for Canadian federal government projects is briefly described. In the non-legislated Canadian system, follow-up to assessments is one of the major means of encouraging and improving the implementation of environmental impact assessment and the quality of environmental work done around development projects. The results of a study on the status of follow-up in the Canadian Government are presented. Factors that limit and that are conducive to follow-up are discussed. The effectiveness of follow-up depends as much on the circumstances surrounding a project and the concerned parties as on the follow-up techniques used; both of these aspects can be addressed in the planning and management of follow-up and of environmental impact assessment overall. Areas for improving the management of follow-up are identified and discussed: planning of follow-up activities, coordination of concerned parties, generation of clear understandings, information management, resource allocation, and maintenance of credibility. A method for planning follow-up activities for specific projects is presented.     

Soil sampling and analysis for volatile organic compounds

Concerns over data quality have raised many questions related to sampling soils for volatile organic compounds (VOCs). This paper was prepared in response to some of these questions and concerns expressed by Remedial Project Managers (RPMs) and On-Scene Coordinators (OSCs). The following questions are frequently asked:

1. Is there a specific device suggested for sampling soils for VOCs?
2. Are there significant losses of VOCs when transferring a soil sample from a sampling device (e.g., split spoon) into the sample container?
3. What is the best method for getting the sample from the split spoon (or other device) into the sample container?
4. Are there smaller devices such as subcore samplers available for collecting aliquots from the larger core and efficiently transferring the sample into the sample container?
5. Are certain containers better than others for shipping and storing soil samples for VOC analysis?
6. Are there any reliable preservation procedures for reducing VOC losses from soil samples and for extending holding times?

Guidance is provided for selecting the most effective sampling device for collecting samples from soil matrices. The techniques for sample collection, sample handling, containerizing, shipment, and storage described in this paper reduce VOC losses and generally provide more representative samples for volatile organic analyses (VOA) than techniques in current use. For a discussion on the proper use of sampling equipment the reader should refer to other sources (Acker, 1974; U.S. EPA, 1983; U.S. EPA, 1986a). Soil, as referred to in this report, encompasses the mass (surface and subsurface) of unconsolidated mantle of weathered rock and loose material lying above solid rock. Further, a distinction must be made as to what fraction of the unconsolidated material is soil and what fraction is not. The soil component here is defined as all mineral and naturally occurring organic material that is 2 mm or less in size. This is the size normally used to differentiate between soils (consisting of sands, silts, and clays) and gravels. Although numerous sampling situations may be encountered, this paper focuses on three broad categories of sites that might be sampled for VOCs:

1. Open test pit or trench.
2. Surface soils (<5 ft in depth).
3. Subsurface soils (>5 ft in depth).

     

The analysis of monitoring data with the aid of time-series analysis

Methods derived from time-series analysis are proposed for processing monitoring data. The necessity for the use of these methods is demonstrated. In a case study time-series analysis was applied to assess the impact of the closure of the Grevelingen estuary (S. W. Netherlands) in 1971 on a local wintering population of Oystercatchers (Haematopus ostralegus) in the adjacent Oosterschelde estuary.Communication No. 328 of the Delta Institute for Hydrobiological Research.     

TPH-contaminated Mexican Refinery Soil: Health Risk Assessment and the First Year of Changes

The soil of a coastal Mexican refinery is quite contaminated, especially by hydrocarbons, with detected concentrations up to 130000 mg kg(-1) as TPHs (total petroleum hydrocarbons). The main sources of contamination are pipelines, valves, and old storage tanks, besides the land disposal of untreated hydrocarbon sediments derived from the cleaning of storage tanks. A health risk assessment (HRA) was carried out in order to measure the risk hazard indexes and clean-up standards for the refinery soil. HRA suggested the following actions to be taken: benzene concentrations must be reduced in eight of the 16 studied refinery zones to 0.0074-0.0078 mg kg(-1). Also, vanadium concentration must be reduced in two zones up to a concentration of 100 mg kg(-1). In only one of all of the studied zones, benzo(a)pyrene concentration must be reduced to 0.1 mg kg(-1). After 1 yr, TPHs showed a diminution of about 52%. Even though TPHs concentrations were variable, during 1999 the average concentrations were as much as 15.5 times the goal concentration. For year 2000, TPHs concentrations were only 7.4-fold the proposed value. For the 1999-2000 period, PAHs (polycyclic aromatic hydrocarbons) concentrations decreased by 82%. Some PAHs with 2, 3, 4, and 5 aromatic rings were removed up to 100% values.     

Linking Land Cover and Water Quality in New York City’S Water Supply Watersheds

The Catskill/Delaware reservoirs supply 90% of New York City’s drinking water. The City has implemented a series of watershed protection measures, including land acquisition, aimed at preserving water quality in the Catskill/Delaware watersheds. The objective of this study was to examine how relationships between landscape and surface water measurements change between years. Thirty-two drainage areas delineated from surface water sample points (total nitrogen, total phosphorus, and fecal coliform bacteria concentrations) were used in step-wise regression analyses to test landscape and surface-water quality relationships. Two measurements of land use, percent agriculture and percent urban development, were positively related to water quality and consistently present in all regression models. Together these two land uses explained 25 to 75% of the regression model variation. However, the contribution of agriculture to water quality condition showed a decreasing trend with time as overall agricultural land cover decreased. Results from this study demonstrate that relationships between land cover and surface water concentrations of total nitrogen, total phosphorus, and fecal coliform bacteria counts over a large area can be evaluated using a relatively simple geographic information system method. Land managers may find this method useful for targeting resources in relation to a particular water quality concern, focusing best management efforts, and maximizing benefits to water quality with minimal costs.The United States Environmental Protection Agency through its Office of Research and Development funded and managed the research described here. It has been subjected to Agency’s administrative review and approved for publication as an EPA document.     

210Po bioaccumulation in coastal sand dune wild legumes--Canavalia spp. of southwest coast of India

In view of considerable natural background radioactivity reported from southwest coast of India, the current study documents bioaccumulation of 210Po in two dominant coastal sand dune perennial mat-forming wild legumes, Canavalia cathartica and C. maritima. Root, stem, leaf, mature beans, dry seeds and rhizosphere sand were analyzed for 210Po concentration. 210Po activity decreased in the order of leaves > roots > seeds > stems > beans. The highest 210Po activity was recorded in rhizosphere sand samples (5.78-5.88 Bq kg(-1)) followed by the leaf samples (3.27-3.07 Bq kg(-1)), while it was lowest in mature beans (0.13-0.20 Bq kg(-1)). 210Po activities or tissue moisture between plant species were not significantly different (p > 0.05; t-test). But 210Po activity vs. moisture differed significantly in all tissues (p = 0.0001), vegetative tissues (root, stem and leaf) (p = 0.0016), seeds (p = 0.0393) and proteins in seeds (p = 2.355 x 10(-6)) indicating the importance of moisture and protein in 210Po accumulation. Although 210Po has affinity for proteins, it did not concentrate too much in seed proteins of Canavalia. Concentration of 210Po in mature beans is at safe levels as fisher folk only consume tender pods occasionally. 210Po activity in Canavalia is compared with other plant materials. As the landraces of C. cathartica and C. maritima are distributed throughout pantropical coastal areas, the current study emphasizes on considering them as bioindicators to monitor 210Po in coastal sand dune biomes and in turn the health of coastal population.     

EPA's monitoring program at Love Canal 1980

Summary As stated at the beginning of this paper conclusions reached thus far cannot be discussed in this paper. However, a great deal of information is available for examination.EPA displayed its ability to coordinate widely separated laboratories, both Federal and private, into a smooth working team in a very short period of time. A very comprehensive study plan was also developed and implemented quickly. EPA was fortunate to have already had GCA under contract when the emergency arose. In no small part the success of the field effort was due to the managerial and technical abilities of the GCA team.Within a period of 6 weeks a plan was developed, a prime contractor retained, subcontractors hired, and field activities begun. Within a period of 3 months in excess of 8600 field samples were collected and over 12,000 field and QC samples were analyzed. During this same period 2 major data systems were developed, debugged, and placed into operation.In short this EPA project was probably the most comprehensive multimedia field project ever attempted by EPA and certainly the data is being subjected to the most strenuous quality control measures ever imposed by this Agency. The entire program is presently under peer review and the results are being prepared for publication by EPA Headquarters.Note. Originally intended to be published as part of the special issue on Exposure Monitoring: An International Workshop (Las Vegas, Nevada, October 19–22, 1981).