Phosmet residues in an orchard and adjacent recreational area

Two cover sprays of phosmet were applied to an orchard adjoining a camping area and a bird sanctuary with a resident goose population. Insecticide residues were monitored on orchard leaves, orchard ground cover, ground cover in the camp-site and along the adjacent lakeshore. Despite attempts to minimize drift, significant spray residues were found outside the target area. Residues on ground cover and leaves were reduced by sprinkler irrigation subsequent to spray application.     

Characterization of a thermal power plant air heater washing waste: a case study from Iran.

In Iran most of the electricity is generated by thermal power plants. As a result of fuel oil burning in winter time, the air heaters of the boilers have to be washed and cleaned frequently. The wastewater originating from air heater washing is then treated in an effluent treatment plant by chemical precipitation followed by dewatering of the sludge produced. The resulting waste is classified as specific industrial waste that should be characterized in detail under the Waste Management Act of Iran. The quantity of this waste produced in the studied power plant is about 20 tonnes year(-1). In the present investigation, the first to be carried out in Iran, seven composite samples of dewatered sludge from air heater washing wastewater treatment were subjected to investigation of the physical properties, chemical composition and leaching properties. The most likely pollutants that were of concern in this study were heavy and other hazardous metals (Cd, Co, Cr, Mn, Ni, Pb, Zn and V). The results revealed that mean pH, wet and dry density and moisture content of the waste were 6.31, 1532 kg m(-30, 1879 kg m(-3) and 15.35%, respectively. Magnetite, SiO2, P2O5, CaO, Al2O3 and MgO were the main constituents of the waste with a weight percentage order of 68.88, 5.91, 3.39, 2.64, 2.59 and 1.76%, respectively. The toxicity characteristic leaching procedure test results for some heavy and other hazardous metals showed that mean elemental concentrations of Cd, Co, Cr, Mn, Ni, Pb, V and Zn in leachate were 0.06, 1.55, 5.49, 36.32, 209.10, 0.58, 314.06 and 24.84 mg L(-1), respectively. According to the Waste Management Act of Iran this waste should be classified as hazardous and should be disposed of in accordance with hazardous waste disposal regulations.     

A comparison of the persistence in a clay loam of single and repeated annual applications of seven granular insecticides used for corn rootworm control

In May 1983, granular formulations of carbofuran, chlorpyrifos, disulfoton, fonofos, isofenphos, phorate, and terbufos were applied in incorporated bands to duplicate 2 m2 field plots of clay loam. Insecticide concentrations were determined in the bands at 0,1,2,3,4,6,8,10,12,16, and 20 wk. Following spring cultivation, the insecticides were applied to the same plots in 1984 and 1985. In addition, carbofuran was applied to previously untreated plots in 1984 and all 7 materials were applied to previously untreated plots in 1985. Sampling and analysis were carried out as in 1983. Persistence was assessed on the basis of the disappearance rates measured for the 1st 8 wk and of a calculated Effectiveness Potential (the ratio of the average residue in the upper 5 cm of the band at 8, 10 and 12 wk and the published LC95 for western corn rootworm in clay loam soil). Soils treated with carbofuran and isofenphos in 1984 and all soils treated in 1985 were tested for anti-insecticide activity. Soil cores from some carbofuran, chlorpyrifos and terbufos treated plots were sectioned vertically to establish the distribution of the insecticides during 1985. In addition, granular and pure chemical forms of isofenphos and carbofuran were applied at 10 ppm to anti-isofenphos and anti-carbofuran active and control soils (from field plots) maintained at 10 and 20% moisture in the laboratory to assess the effect of formulation and moisture on persistence in active soils. Insecticide concentrations were determined at 0,1,3,7, 10,14,21,28, and 35 days. The persistence of chlorpyrifos, terbufos and phorate was relatively constant over the 3 years and between plots receiving single and multiple treatments. Disulfoton and fonofos behavior was more variable and that of carbofuran and isofenphos was extremely variable. Anti-insecticide activity against carbofuran and isofenphos was detectable 2 wk after an initial application and was still present the following spring. Anti-insecticide activity against fonofos, terbufos sulfoxide, phorate sulfone and disulfoton sulfone was also generated in this soil. Anti-insecticide activity against chlorpyrifos, disulfoton, terbufos and phorate was not present. Carbofuran, chlorpyrifos and terbufos (+ metabolites) present in the upper 5 cm of soil averaged 93, 94 and 94%, respectively, of the total core contents over 12 wk. Significant moisture dependent differences were observed between the behavior of granular carbofuran and granular isofenphos in anti-insecticide active soils.(ABSTRACT TRUNCATED AT 400 WORDS)     

Comparative study of 137Cs partitioning between solid and liquid phases in Lakes Constance, Lugano and Vorsee.

The methodology for estimating radiocaesium distribution between solid and liquid phases in lakes is applied for three prealpine lakes: Lake Constance (Germany), Lake Lugano (Switzerland) and Lake Vorsee (Germany). It is based on use of the exchangeable distribution coefficient and application of the exchangeable radiocaesium interception potential (RIPex). The methodology was tested against experimental data. Good agreement was found between estimated and measured 137Cs concentrations in Lake Constance and Lake Lugano, whereas for Lake Vorsee a discrepancy was found. Bottom sediments in Lake Vorsee are composed mainly of organic material and probably cannot be described in terms of the specific sorption characteristics attributed to illitic clay minerals.     

Studies on the distribution of beta- and gamma-isomers of hexachlorocyclohexane in rat tissues

A study of the comparative distribution pattern of beta- and gamma-isomers of hexachlorocyclohexane (HCH) in albino rat tissues as a function of duration of treatment at two dose levels revealed different accumulation patterns for the two isomers in tissues. In general, the accumulation pattern was found to be in the order: fat greater than kidney greater than lungs greater than liver greater than muscle greater than heart greater than spleen greater than brain greater than blood for beta-HCH and fat greater than brain greater than kidney greater than muscle greater than lungs greater than heart greater than spleen greater than liver greater than blood for gamma-HCH. The tissue accumulation of beta-isomer was always greater than that of gamma-isomer in any tissue except in brain. Brain beta-HCH residue levels were relatively lower than in many other tissues except blood, whereas brain gamma-HCH concentration was only next to fat. A higher dose or a longer period of treatment generally produced a more marked elevation of tissue residue levels in beta-HCH fed rats, but not in gamma-HCH treated animals.     

An atmospheric—terrestrial heavy metal transport model. I. model theory

A general model TOHM was developed to predict the terrestrial fate of zinc, cadmium, chromium, lead and mercury emitted by the operation of a coal-fired electric generating facility. The general model consisted of interfacing submodels describing atmospheric dispersion, precipitation, soil chemistry, and soil erosion. The models were developed from input data from a semi-arid region of the southwest United States, and except for the climatic and topographic constraints, are not site specific. TOHM was found to predict no substantial increase in indigenous levels of zinc, chromium and lead in the impact (deposition) area. However, both mercury and cadmium were predicted to be emitted and eroded to the environmental sink (receiving lake) in concentrations exceeding that naturally present in the system. TOHM is currently unvalidated, though comparison of soil erosion predictions with erosion quantities measured in the impact area gives good agreement.     

A model of savanna litter decomposition

A model of litter decomposition in a South African savanna is described. Decomposing material is divided into a number of particle classes, distinguishing material of different ages, origins and size. Each particle class is further divided into a number of chemical constituents. Processes modelled include ageing, physical disintegration, consumption by termites and decay. Sources of fresh litter include tree and grass leaves. Results from a standard run of the model and a number of runs with changed parameter values to test the model's sensitivity to these are presented and discussed. From exercise of the model it appears that the most important processes relate to soil-feeding termites, with decay and physical breakdown being the background against which termites operate.