Warm forming die design,part I: Experimental validation of a novel thermal finite element modeling code

Finite element analysis (FEA) has become an invaluable tool in the design of sheet metal stamping dies and processes. FEA has gained widespread acceptance as the best method of optimizing dies for conventional stamping processes. More recently, FEA has been shown to be an effective method of designing tooling for sheet forming processes. In this work, an FEA based approach is applied to the warm stamping (warm forming) process. This work introduces a new thermal finite element analysis software called PASSAGE®/Forming (PASSAGE) that enables the up-front design of the thermal management of warm forming dies. This thermal finite element analysis software is designed to specifically handle the forming and optimization scenarios related to the heating of a stamping die while minimizing user interface time. In this work, PASSAGE has been applied to a simple block of steel embedded with cartridge heaters to validate the prediction capability of this software under two different heating conditions. The results show that PASSAGE is capable of predicting the actual steady-state temperature distribution within the block with an acceptable level of accuracy while yielding notable information to the user with respect to specifying power requirements. A finite element software package like PASSAGE is a valuable tool that will aid greatly in the implementation of warm forming as a manufacturing process beyond the scope of the laboratory and into production.     

Meeting emission targets under uncertainty—the case of Finnish non-emission-trading sector

The European Union (EU) has set a target to reduce its greenhouse gas (GHG) emissions at least 10 % below the 2005 levels by 2020 in the non-Emission Trading Sector (non-ETS). As part of this, each Member State has a binding national emission limitation target for the non-ETS sector. Finland’s target, examined as a case study in this paper, is to reduce emissions at least 16 % below 2005 levels by 2020. The objective of this study is to find cost optimal mitigation portfolios that meet Finland’s reduction target and to analyze the risks of not attaining the emission target or exceeding the assumed costs. The question was addressed with a stochastic optimization model, Stochastic Optimization of non-ETS Emissions (SONETS) selecting separate mitigation measures that meet the target on expectation. The results show that optimal portfolios include relatively high uncertainty both in costs and achieved reductions. The prices of crude oil and diesel, and the abatement cost of reducing hydrofluorocarbon (HFC) emissions seem to account for the majority of uncertainty regarding total costs. The baseline predictions for various non-ETS subsectors (such as transport and agriculture) were found to have the greatest contribution to the uncertainty of attaining emission target. The results also show that some abatement actions are chosen in nearly all efficient portfolios, while other actions are seldom chosen. For example replacing oil burners in the end of technical life time or recovery of methane (CH₄) from waste are often chosen whereas ban of landfilling of organic waste is chosen extremely seldom. It also seems that the results are somewhat sensitive to the inclusion or exclusion of the interdependencies of mitigation measures.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

全新世哈尼泥炭地碳积累速率及影响因素

本工作研究了全新世中国东北地区哈尼泥炭地的碳积累速率与气候变化的响应机制。综合多指标腐殖化度、有机碳含量、干容重和纤维素碳氧同位素重建了哈尼地区全新世气候变化历史,并且基于定年、有机碳含量和干容重得到碳积累速率数据。哈尼泥炭时间加权平均碳积累速率28.3gC/(m2·a)。B/A暖期后期温暖湿润气候有利于碳积累,出现碳积累高峰。相对寒冷的新仙女木期碳积累速率有所降低。温暖湿润早中全新世虽有高泥炭分解,但高初级生产力还是占据主导作用,出现高碳积累速率。期间有两次火山碎屑层扰动了泥炭发育,导致碳积累速率下降。高碳积累速率一直持续到4ka BP左右大暖期结束。4.0~1.6ka BP太平洋季风减弱,泥炭表面偏干,加之降温导致低初级生产力,最终导致此阶段碳积累速率显著降低。之后季风不断增强,碳积累速率也随之增加。八次IRD降温,小冰期和新仙女木降温在哈尼都是冷湿气候组合。冷湿气候虽使有机物分解降低,但更大程度的抑制了初级生产力发展,导致低碳积累速率。     

上市公司环境管理应注意的问题研究

随着公众环保意识的不断增强,上市公司环境行为日益受到关注,对上市公司的环境管理水平也提出了新要求。上市公司应配备专业环境管理队伍,完善并实施企业环境管理制度,在日常环境管理中应注意环境影响评价和“三同时”手续的办理,及时进行排污申报并办理排污许可证,制定并执行环境监测计划,保证环保设施稳定运行,确保污染物达标排放,妥善处理生产过程中产生的一般固废和危险废物,做好事故应急预案,避免出现环境污染事件,并根据相关要求开展清洁生产审核,进行环境信息公开。     

论排污权交易与清洁生产的关系

为解决在排污权交易的前提下,企业如何积极主动地实施清洁生产,处理好排污权交易与清洁生产的关系。在排污权交易对清洁生产激励效果分析的基础上,运用数据对比和类比的方法,论证出排污权交易对清洁生产实施提供了经济支持,清洁生产对排污权交易的实施提供了技术上的保证。这种互为动力、支撑的关系,构成一种良性循环模式,为企业正确处理经济发展和环境保护之间的关系,达到经济效益和环境效益的双赢提供了依据。     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

企业清洁生产审计运行机制研究

科学发展观的提出贯彻了协调经济发展与环境保护的理念,清洁生产审计则是控制和防范污染的有效管理措施之一,了解清洁生产审计的运行机制并保证其有效实施对中国可持续发展的战略目标至关重要。首先分析了清洁生产审计在国内外研究、发展现状,在综合考虑相关制约因素的茂盛是构建了企业清洁生产审计的运行机制,最后,为保障清洁生产审计运行机制的有效实施,提出了五点保障措施。     

离子色谱法测定无组织废气中溴化氢浓度

探讨无组织废气中溴化氢的测定方法。采样方法参照环境空气中氯化氢的采样方法,用淋洗液做吸收液,用大型气泡吸收管作收集器,点位设置按照《大气污染物综合排放标准(》GB16297-1996)附录C给出的无组织排放监控点设置方法进行;分析方法使用离子色谱法测定,分离度较高,相对标准偏差为1.7%～1.9%,加标回收率为93.8%～97.6%,溴离子的检测限为0.02μg/ml,当采样体积为60 L时,无组织废气中溴化氢的检出限为0.003 mg/m3。     

贵州省湄潭县生态旅游发展规划研究

湄潭县旅游资源丰富,本文介绍了湄潭旅游资源的现状,从缺乏旅游精品、资源整合不足、文化挖掘不深、旅游宣传不力、旅游设施滞后、旅游人才匮乏等方面分析了旅游产业存在的不足,提出了发展生态旅游的思路,从茶文化、乡村休闲度假和浙大西迁文化和湄江山水四方面设计了生态旅游产品;从低碳旅游设施建设规划和体验式生态旅游规划两方面规划了绿色服务产品,并提出从旅游者、从业者和政府三个层面构建管理型生态旅游;最后对湄潭生态旅游发展提出了展望。