A natural analogue of high-pH cement pore waters from the Maqarin area of northern Jordan: Comparison of predicted and observed trace-element chemistry of uranium and selenium

Current design concepts for low-/intermediate-level radioactive waste disposal in many countries involve emplacement underground in a cementitious repository. The highly alkaline groundwaters at Maqarin, Jordan, are a good analogue for the cementitious pore waters that will be present within such a repository. A geochemical modelling study of these groundwaters has been carried out in order to test the applicability of equilibrium models in geochemical programs and their associated thermodynamic databases in such hyperalkaline conditions. This was achieved by comparison of elemental solubilities and speciations predicted by the programs with observations in the natural system. Five organisations took part in the study: AEA Technology, U.K.; Chalmers University of Technology, Sweden; MBT Tecnología Ambiental, Spain; Nagra, Switzerland; and SKB, Sweden. The modelling study was coordinated by the University of Berne.The results of the study showed good agreement between the predictions of the programs employed. Comparison of the observed solids with those predicted by the models has allowed limited validation of the databases. The results for U and Se are presented here.     

Surfactant solubilization of hydrophobic compounds in soil and water

The soil/water partition coefficient (K_d) of hexachlorobenzene (HCB) ranged from 220 1/kg to 1800 1/kg for eight soils having a wide range of physico-chemical properties. K_d normalised to soil organic carbon (K_oc) was found to be 28000 ± 4800 1/kg. Anionic surfactant dodecylsulphate (DS) present at concentrations above the critical micellar concentration (CMC) caused reductions in the apparent soil/water partition coefficient (K_d ^*) in the range of 3–26 times for most soils and up to 36–91 times for sandy soils. Below CMC, at environmentally relevant surfactant concentrations, K_d ^* was reduced by a factor of 1–13. For clay and calcareous soils significant adsorption/complexation/precipitation of DS occurred. At the lowest DS concentration this produced a two-fold increase in K_d ^*. At increasing DS concentrations this effect was shielded by the solubihzing effect from DS. Monomer (K_mn) and micellar (K_mc) surfactant/water partition coefficients for HCB were determined to be, 980 ± 190 1/kg and 21000 ± 1600 1/kg, respectively.     

Comparison of two methods for the determination of total organic halogen (TOX) in receiving waters

Two methods for the determination of total organic halogen (TOX), orginating from bleaching of pulp, in receiving waters have been compared. One of the methods (AC/MC) is based on adsorption of the halogenated matter onto an activated carbon sorbent. The halogen is determined by a microcoulometric technique after combustion of the carbon. The other method (XAD/PT) uses an XAD resin as sorbent and the determination of the halogen is carried out by potentiometric titration after a schöniger combustion of the resin eluate.Both methods showed good performance for samples consisting of spent bleach liquors diluted with distilled, fresh and brackish water. The repeatability was very good with a relative standard deviation less than a few per cent. The detection limit of the AC/MC method is about 0.1 μmol/1 and for the XAD/PT method about ten times higher. The AC/MC method gave in most cases 10–20% higher TOX concentrations compared to the XAD/PT method.     

Cadmium concentration in tobacco (Nicotiana tabacum L.) from different countries and its relationship with other elements

Cadmium accumulation in crop plants, such as tobacco (Nicotiana tabacum L.), can lead to human exposure to this carcinogenic metal. To better define actual Cd distribution in cured or processed tobacco leaves from chief tobacco-producing regions, we analyzed 755 leaf samples of three major types (Flue-cured, Burley, and Oriental) obtained from 13 countries during 2001-2003. This survey may help identify regions with low- or high-Cd concentrations in tobacco to obtain insight into the cause of the concentration extremes and to assist in defining strategies to reduce Cd in tobacco. Cadmium concentrations in the samples ranged from 0 to 6.78 microg g(-1), as determined by ICP-MS. Significant differences were found among types and among countries, but significant interactions between type and country were found. Variations in Cd concentrations were also found in all countries. Our results suggest an important contribution of the field (e.g., bioavailable Cd in soil, other soil characteristics) to the Cd concentration in tobacco. Finally, the correlation between the concentration of Cd and that of other elements differed among the types, which could be effectively discriminated based on the concentrations of 20 elements.     

Melamine-based organoclay to sequester atrazine

Sequestration of aqueous atrazine by organoclays prepared from the surfactant 6-piperazin-1-yl-N,N'-bis-(1,1,3,3-tetramethyl-butyl)-(1,3,5)triazine-2,4-diamine and Gonzales bentonite was assessed using 14C-labeled atrazine. Organoclays with varying ratios of surfactant to clay were evaluated with respect to their ability to sequester atrazine from an aqueous solution. Organoclays containing 100-200 g kg-1 surfactant on a total weight basis provided the most efficient adsorption of atrazine, with apparent KOC values exceeding 5000 l kg-1 at these loading fractions. Less than 12% of sequestered atrazine was released during four sequential day long washings, supporting our expectation that the majority of the reaction of atrazine with the surfactant lead to irreversible chemical bond formation through nucleophilic aromatic substitution.     

Prediction of ozone concentrations in Oporto city with statistical approaches

The performance of three statistical methods: time-series, multiple linear regression and feedforward artificial neural networks models were compared to predict the daily mean ozone concentrations. The study here reported was based on data from one urban site with traffic influences and one rural background site. The studies were performed for the year 2002 and the respective four trimesters separately. In the multiple linear regression and feedforward artificial neural network models, the concentrations of ozone, the concentrations of its precursors (nitrogen oxides) and some meteorological variables for one and two days before the prediction day were used as predictors. For the application of these models in the validation step, the inputs of ozone concentration for one and two days before were replaced by the ozone concentrations predicted by the models. The results showed that time-series modelling was not profitable. In the development step, similar performances were obtained with multiple linear regression and feedforward artificial neural network. Better performance indexes were achieved with feedforward artificial neural network models in validation step. Concluding, feedforward artificial neural network models were more efficient to predict ozone concentrations.     

Nationwide monitoring of polychlorinated biphenyls and organochlorine pesticides in sediments from coastal environment of Korea

To assess the organochlorine contamination in the Korean marine environment, a nationwide monitoring study was conducted. A total of 138 surface sediments, covering the whole Korean coast, were collected and analyzed. Organochlorine compounds (OCs) were widely distributed in the Korean coastal environment, with PCB and DDT contamination being particularly prevalent. The overall concentrations of PCBs, DDTs, HCHs, CHLs, and HCB in surface sediments were in the range of 0.088-199ngg(-1) (median value: 1.56ngg(-1)), 0.006-135ngg(-1) (0.68ngg(-1)), not detected (ND)-5.46ngg(-1) (0.32ngg(-1)), ND-3.26ngg(-1) (0.14ngg(-1)), and ND-2.59ngg(-1) (0.05ngg(-1)), respectively. The southeastern coast was found to be highly contaminated. Overall contamination status of Korean coastal sediments with regard to OCs is lower than that of USA. With the exception of highly industrialized sites, Korean coastal areas in general showed similar OC concentrations to those of other Asian countries. There was a significant correlation between distributions of most organochlorine contaminants with each other. OC contamination is closely related to shipping and industrial activities. Of the 7 sites categorized as highly polluted, 4 are in a harbor zone. Adverse effects to benthic communities are expected at the levels of OC contamination observed from harbor and industrial areas.