Environmental accounting—making it work for your company

There is no simple recipe for success in implementing environmental accounting. Day-to-day needs and strategic objectives will determine how an organization can benefit from environmental accounting. Our previous article listed many potential applications of environmental accounting and discussed common environmental accounting objectives.¹ This article is geared toward organizations that want to start implementing environmental accounting and create a foundation of success on which to build. In this context, the questions are (1) What are some logical starting points? and (2) Where do companies go from there? This article first describes some paradigms that may guide companies as they think about how to implement environmental accounting, then it presents a series of critical activities that are needed to make environmental accounting an integral part of ongoing business management functions.     

Food availability as a selective factor on the chemical compositions of midwater fishes in the eastern North Pacific

In September and October 1980 we examined the relationships between food availability, depth, and chemical composition among 12 midwater fish species, from three adjacent areas of the eastern North Pacific: the eastern gyre, the California Current, and the transitional region between them. By comparing trends in chemical composition across a geographical productivity gradient, the influence of food availability could be examined both with and without depth as a dependent variable. In general, caloric density, lipids, and water content showed consistent trends along both vertical and horizontal gradients of food availability. Lipids and caloric contents were lowest among bathypelagic species and among fishes from the gyre. Water content was highest in the gyre and among deeper-living species. While protein content as a percentage of the total wet weight declined with depth, there was no clear trend among mesopelagic species between stations. Protein as percent of the total organic content showed no decrease with depth, but was significantly higher in the gyre among mesopelagic species. These findings suggest that compositional trends in water, lipids, and caloric content are correlated with food availability, regardless of any depth-related factors. In contrast, protein did not vary consistently with food availability and thus may be linked to other factors.     

Practitioner Perspectives on the Role of Science in Environmental Impact Assessment

A large body of literature addresses the role of science in environmental impact assessment (EIA) but less attention has been given to the views of practitioners themselves. In this research a survey of 31 EIA practitioners in Western Australia was undertaken to determine their perceptions of the quality and importance of science in EIA. The survey results are compared with previous theoretical, empirical, and survey studies of the role of science in EIA. Interview questions addressed the role of science in impact prediction, monitoring activities, mitigation and management, and EIA decision-making. It was clear from the interviews that many practitioners are satisfied with the quality of science currently used in EIA, but do not believe that it is given sufficient importance in the process. The quality and importance of science in the predecision stages of EIA was rated higher than in the postdecision stages. While science was perceived to provide the basis for baseline data collection, impact prediction, and mitigation design, it was seen to be less important during decision-making and ongoing project management. Science was seen to be just one input to decision-makers along with other factors such as sociopolitical and economic considerations. While time and budget constraints were seen to limit the scientific integrity of EIA activities, pressure from the public and regulatory authorities increased it. Improving the scientific component of EIA will require consideration of all these factors, not just the technical issues.     

Delineation of ecosystem regions

As a means of developing reliable estimates of ecosystem productivity, ecosystem classification needs to be placed within a geographical framework of regions or zones. This paper explains the basis for the regions delineated on the 1976 mapEcoregions of the United States. Four ecological levels are discussed—domain, division, province, and section—based on climatic and vegetational criteria. Statistical tests are needed to verify and refine map units.     

Survival Model for Foot and Leg High Rate Axial Impact Injury Data

Objectives: Understanding how lower extremity injuries from automotive intrusion and underbody blast (UBB) differ is of key importance when determining whether automotive injury criteria can be applied to blast rate scenarios. This article provides a review of existing injury risk analyses and outlines an approach to improve injury prediction for an expanded range of loading rates. This analysis will address issues with existing injury risk functions including inaccuracies due to inertial and potential viscous resistance at higher loading rates.

Methods: This survival analysis attempts to minimize these errors by considering injury location statistics and a predictor variable selection process dependent upon failure mechanisms of bone. Distribution of foot/ankle/leg injuries induced by axial impact loading at rates characteristic of UBB as well as automotive intrusion was studied and calcaneus injuries were found to be the most common injury; thus, footplate force was chosen as the main predictor variable because of its proximity to injury location to prevent inaccuracies associated with inertial differences due to loading rate. A survival analysis was then performed with age, sex, dorsiflexion angle, and mass as covariates. This statistical analysis uses data from previous axial postmortem human surrogate (PMHS) component leg tests to provide perspectives on how proximal boundary conditions and loading rate affect injury probability in the foot/ankle/leg (n = 82).

Results: Tibia force-at-fracture proved to be up to 20% inaccurate in previous analyses because of viscous resistance and inertial effects within the data set used, suggesting that previous injury criteria are accurate only for specific rates of loading and boundary conditions. The statistical model presented in this article predicts 50% probability of injury for a plantar force of 10.2 kN for a 50th percentile male with a neutral ankle position. Force rate was found to be an insignificant covariate because of the limited range of loading rate differences within the data set; however, compensation for inertial effects caused by measuring the force-at-fracture in a location closer to expected injury location improved the model's predictive capabilities for the entire data set.

Conclusions: This study provides better injury prediction capabilities for both automotive and blast rates because of reduced sensitivity to inertial effects and tibia–fibula load sharing. Further, a framework is provided for future injury criteria generation for high rate loading scenarios. This analysis also suggests key improvements to be made to existing anthropomorphic test device (ATD) lower extremities to provide accurate injury prediction for high rate applications such as UBB.     

Estimating Current and Future Groundwater Resources of the Maldives

The water resources of the atolls of the Republic of Maldives are under continual threat from climatic and anthropogenic stresses, including land surface pollution, increasing population, drought, and sea‐level rise (SLR). These threats are particularly acute for groundwater resources due to the small land surface area and low elevation of each island. In this study, the groundwater resources, in terms of freshwater lens thickness, total volume of fresh groundwater, and safe yield are estimated for the 52 most populous islands of the Maldives for current conditions and for the year 2030, with the latter accounting for projected SLR and associated shoreline recession. An algebraic model, designed in previous studies to estimate the lens thickness of atoll islands, is expanded in this study to also estimate volume of groundwater. Results indicate that average current lens thickness, groundwater volume, and per capita safe yield are approximately 4.6 m, 1,300 million liters, and 300 l/day, and that these values will decrease by approximately 10, 11, and 34%, respectively, by the year 2030. Based on results, it is demonstrated that groundwater, in terms of quantity, is a viable source of water for the islands of the Maldives both now and in coming decades, particularly for islands with large surface area and low population. Study results can provide water resource managers and government officials with valuable data for consideration in water security measures.     

Persistence of the sulfonylurea herbicides thifensulfuron-methyl, ethametsulfuron-methyl, and metsulfuron-methyl in farm dugouts (ponds)

Sulfonylurea herbicides are applied at relatively low rates (3 to 40 g ha(-1)) to control weeds in a variety of crops across the Canadian prairies. Because of their high phytotoxicity and the likelihood of their transport in surface runoff, there is concern about their possible impact to aquatic ecosystems. Little is known, however, about their persistence and behavior in aquatic ecosystems. To assess persistence in aquatic ecosystems, three prairie farm dugouts (ponds) were fortified with either thifensulfuron-methyl {methyl 3-[[[[(4-methoxy-6-methyl-1,3,5-triazin-2-yl)amino]carbonyl]amino]sulfonyl]-2-thiophenecarboxylate}, ethametsulfuron-methyl {methyl 2-[[[[[4-ethoxy-6-(methylamino)-1,3,5-triazin-2-yl]amino]carbonyl]amino]sulfonyl]benzoate} or metsulfuron-methyl {methyl 2-[[[[(4-methoxy-6-methyl-1,3,5-triazinyl)amino]carbonyl]amino]sulfonyl]benzoate}. The decreasing order of persistence of environmentally relevant concentrations (1 to 4.6 microg L(-1)) of these herbicides in dugout water over the June to October period was metsulfuron-methyl>ethametsulfuron-methyl>thifensulfuron-methyl. The corresponding dissipation half-lives (DT(50)) of 84, 30, and 16 d, respectively, are in the same relative order as the recropping intervals for these herbicides. Thifensulfuron-methyl showed a biphasic dissipation with slower dissipation during the winter months. In contrast, the dissipation of metsulfuron-methyl, the sulfonylurea herbicide with the longest DT(50), was somewhat enhanced under winter conditions. One of the major routes of sulfonylurea herbicide dissipation was removal from the water column when dugout water was lost during hydrological discharge. The relatively long persistence of these herbicides in water indicates that partitioning into sediments was minimal, the sulfonylurea and methyl ester linkages in these compounds were resistant to hydrolysis in weakly alkaline waters, and that microbial and photolytic degradation in dugout waters were slow.     

Bridging the gap between laboratory experiments and naturally occurring markets: An inferred valuation method

Several recent studies have found important differences between behavior in the laboratory and the field. We explore two possible causes for the divergence: social concerns and unfamiliarity with the traded good. Consistent with our conceptual model, we find that people overstated their preferences for relatively familiar goods with normative attributes and understated their preferences for a relatively unfamiliar good with low normative motivations in the laboratory as compared to the field. We also find that for goods with a normative dimension, a new method we refer to as inferred valuation has the potential to narrow the lab–field gap. In some cases, willingness-to-pay obtained from a conventional valuation elicitation method is more than twice the value from the new inferred valuation approach.     

Competition,Sustainability and Packaging Policy in the UK

This paper examines the use of economic instruments in the implementation of environmental policy, based upon a recent study into the European Union Packaging and Packaging Waste Directive (94/62/EC). It explores the introduction of competitionbased models in the UK implementation of the Directive, and assesses their ability to achieve positive environmentaloutcomes in a cost-efficient manner. Several problems for the competition model are discussed, particularly the fear of profiteering within marketbased systems by some economic operators; the behaviour of economic operators towards non-profitable market segments; the ability of free-market models to engender public participation in recycling programmes; and the failure of private sector solutions to consider the full environmental costs of packaging. Neo-liberalist competitive models do not address such problems convincingly, and therefore continued government intervention is required if the UK is to meet its targets under the EU Directive. Whilst economic instruments and competition provide avenues for a more effective environmental policy, there is a continuing need for government regulation rather than unquestioning faith in the benefits of the free market.     

Estimating spatially-variable first-order rate constants in groundwater reactive transport systems

Numerical reactive transport models are often used as tools to assess aquifers contaminated with reactive groundwater solutes as well as investigating mitigation scenarios. The ability to accurately simulate the fate and transport of solutes, however, is often impeded by a lack of information regarding the parameters that define chemical reactions. In this study, we employ a steady-state Ensemble Kalman Filter (EnKF), a data assimilation algorithm, to provide improved estimates of a spatially-variable first-order rate constant λ through assimilation of solute concentration measurement data into reactive transport simulation results. The methodology is applied in a steady-state, synthetic aquifer system in which a contaminant is leached to the saturated zone and undergoes first-order decay. Multiple sources of uncertainty are investigated, including hydraulic conductivity of the aquifer and the statistical parameters that define the spatial structure of the parameter field. For the latter scenario, an iterative method is employed to identify the statistical mean of λ of the reference system. Results from all simulations show that the filter scheme is successful in conditioning the λ ensemble to the reference λ field. Sensitivity analyses demonstrate that the estimation of the λ values is dependent on the number of concentration measurements assimilated, the locations from which the measurement data are collected, the error assigned to the measurement values, and the correlation length of the λ fields.