Toxic by-products from the combustion of Kraft lignin

Lignin samples, sub-product in the Kraft process of cellulose from eucalyptus wood, were burnt in a laboratory scale furnace at different residence temperatures and with distinct fuel-rich atmospheres. The yields of CO, CO(2), eight light hydrocarbons (methane, ethylene, ethane, propylene, acetylene, butane, etc.) and 60 semi-volatile+volatile compounds (benzene, toluene, ethylbenzene, styrene, indene, naphthalene, dibenzofuran, phenanthrene, chrysene, etc.) were determined, with nominal reactor temperatures between 800 and 1100 degrees C and residence times of the volatiles evolved and formed between 4 and 7 s. The collection of the gases and volatiles evolved was carried out with a Tedlar bag and by XAD-4 resin respectively, comparing the data obtained in both cases. The emission factor (mg/kg) of the CO was between 2500 and 90000, and under the poor-oxygen atmosphere, the emission factors of many by-toxic products were greater than 100 mg/kg. A pyrolysis run was also performed, obtaining emission factors between 30 and 3000 mg/kg, facilitating its identification. The behaviour of different compounds in the combustion runs was discussed considering three groups in accordance with their stability vs. oxygen, and two groups vs. temperature.     

The Effect of Gamma and Electron Beam Irradiation on the Biodegradability of PLA Films

Biodegradation of poly(lactic) acid (PLA) has been studied extensively, but there is only limited knowledge about the effect of irradiation sterilization on its biodegradability. The aim of this work was to examine the aerobic biodegradation of gamma and electron beam irradiated PLA films along with the effects of aging (3, 6, and 9 months of storage) using a direct measurement respirometric system. Commercial PLA film was exposed to a simulated aerobic compost environment, and its mineralization was 96 % at day 85. Gamma and electron beam irradiation affected the biodegradation of the post-irradiated PLA film. Aging irradiated PLA had some potential to increase the biodegradation rate, as the average value of mineralization after 9 months of storage was higher than for the non-irradiated PLA. Comparison of the effect of storage time on the biodegradability of PLA showed a significant increase in biodegradation of the gamma irradiated PLA after 3 months (70 %) and 9 months of storage (130 %). Similarly, there was a significant difference in the biodegradation of electron beam irradiated PLA between 3 months (68 %) and 9 months of storage (120 %). Due to the priming effect, the percent mineralization of gamma irradiated and E-beam irradiated PLA after 9 months of storage was greater than 100 %. Both non-irradiated and irradiated PLA films can be considered biodegradable plastics since they showed mineralization percentage larger than 90 % of that of the positive control at the end of the test period.     

Photobiology of corals from Brazil’s near-shore marginal reefs of Abrolhos

Coral communities were examined from highly turbid near-shore marginal reefs of Abrolhos (Brazil) to test a paradigm previously developed from observations in clear water reefs; specifically, that coral photobiological properties follow a highly conserved linear relationship with optical depth (ζ) via preferential ‘non-photochemical’ over ‘photochemical’ dissipation of absorbed light energy. PAM flourometry in situ was used to examine the photobiology of the most dominant coral species throughout the platform surfaces and bases of Abrolhos’ characteristic ‘chapeir?es’ reef framework; however, none of the species consistently adhered to the ‘clear water paradigm’. PAM measurements further demonstrated that species conformed to two different strategies of non-photochemical energy dissipation: transient but relatively rapid for the two closely related endemic species (Mussismilia braziliensis and Mussismilia harttii) as opposed to more persistent for Montastrea cavernosa, Porites astreoides and Siderastrea stellata. Further experiments demonstrated that tolerance to anomalous stress amongst species did not correspond with the non-photochemical energy dissipation strategy present but was consistent with the relative dominance of species within the chapeir?es coral communities.     

Light-induced transformations of aza-aromatic pollutants adsorbed on models of atmospheric particulate matter: Acridine and 9(10-H) acridone

The effect of the characteristics of the surface on the phototransformation of acridine, one of the most abundant azapolycyclic compounds encountered in urban atmospheres, and of one of its principal photoproducts, acridone, was studied when adsorbed onto models of the atmospherice particulate matter. For this purpose, relative photodegradation rates were determined from absorption or emission intensities as a function of irradiation times, and some products were isolated and characterized. The relative photodegradation rates of adsorbed acridine show the tendency (NH(4))(2) SO(4) > MgO > Al(2)O(3) >SiO(2). In general, the rates decrease as the fraction of protonated acridine species on the surface increases in MgO, Al(2)O(3), and SiO(2), except for (NH(4))(2) SO(4) where a fast surface reaction occurs. Oxygen reduces the photodestruction rates by as much as 40 to 60% when compared to an inert atmosphere, implying the participation of an acrideine triplet state in the transformation processes on all surfaces except on (NH(4))(2)SO(4). Acridone, a major product, undergoes a photoinduced tautomerization to 9-hydroxy acridine. The formation of a dihydrodiol, another photoproduct of acridine, is suggested by comparison to reported spectral properties of these compounds. This is formed through a singlet oxygen reaction. Photoproducts showing the absence of the narrow absorption band of 250 nm, characteristic of the pi -->pi* transition in tricyclic aromatics, were detected in small yields but not identified. These results suggest possible photochemical transformation pathways that could lead to the ultimate fate of these pollutants in the environment.     

A vegetation management experiment: Goats grazing shrublands in Doñana Natural Park

We have studied the effect of goat grazing on the shrub understory of a pine forest situated in a protected area (Doñana Natural Park). Along three years we have studied the changes in phytovolume, flammability, species richness and diversity in a grazed shrubland and in a control area not grazed by the goats. We studied also food preferences of the goats and the ability of the goats to disperse the seeds of the plants they eat. Goat grazing significantly reduced shrub biomass and flammability, decreasing the risk of forest fire. Goats selected the species they eat, changing the pattern of selection throughout the year. Grazing reduced shrub diversity, but did not affected species richness. The goats can also potentially disperse the seeds of some of the species they eat, since the seeds were able to pass through the goat’s gut and germinated afterwards. Goat grazing on scrub vegetation can be used as an effective tool for the control of shrubs in protected forest areas, without losing biodiversity.     

Baseline mercury and zinc concentrations in terrestrial and coastal organisms of Admiralty Bay, Antarctica

This paper provides the first quantitative information on mercury in soil, coastal sediment, and in characteristic organisms of terrestrial and shallow coastal marine ecosystems from Admiralty Bay (King George Island, Antarctica). As expected for a remote area, mercury content is low in abiotic components of the ecosystem, and probably similar to natural levels. Mercury also occurs in very low concentrations in the vegetation, invertebrates and fish. These low mercury levels may be due to sulphide formation in reducing sediments of this environment. Higher concentrations of mercury occurred in bird feathers and mammal hair, indicating biomagnification. This was not found for Zinc. These results may be useful as a reference background to detect future inputs of trace elements in this remote area of the earth. Terrestrial vegetation and bird feathers are suggested as target regional biomonitors.     

The ecohealth system and the community engagement movement in foundations: A case study of mutual benefits from grants funded by the United Nations Foundation

Ecohealth is a process for identifying key environmental determinants causing mortality or morbidity and combating them by mobilizing multiple social sectors. Evolving out of the concept of environmental health, ecohealth provides a framework for long‐term sustainability. The health outcomes anticipated by environmental interventions are part of a long‐term agenda and require fundamental groundwork for the growth of community‐driven development. Building long‐term sustainability requires that two key approaches be developed through ecohealth. The first is the strengthening of local community institutions, whether formal or informal. The second is building financial mechanisms that are more diversified and less reliant on a single donor. As a result, the ecohealth system provides an opportunity for foundations to empower communities, build cross‐cutting cooperation, and gain knowledge through projects. If people's environmental behaviour is to change and be sustained in the long term to produce desired health outcomes, this will require all members of society to be capable of functioning within the existing institutional infrastructure. This means that not only do formal institutions need to become more accessible but also that concepts relating to local informal institutions must be incorporated into ecohealth projects. It is imperative that we identify and understand relevant local institutions and how they can be transformed so that new environmental forms of behaviour can be sustained and result in positive health outcomes. The intersection of environmental and health concerns provides an ideal area in which the gap between government and civil society can be bridged — not only providing solutions to ecohealth concerns, but building government capacity in general and making these positive changes sustainable in the long term. This article is a case study, based on several United Nations Foundation grants. It outlines the significance of traditional community organizations, the breadth of their long‐term relations with communities, their resources, and the adoption of sustained forms of behaviour. In addition, the article highlights the role that international foundations can play in creating innovative financing mechanisms through community‐based foundations.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.