Risk assessment and pathway study of arsenic in industrially contaminated sites of Hyderabad: a case study

Different areas in the industrial region of Patancheru near Hyderabad, Andhra Pradesh (A.P), India are contaminated with high concentration of arsenic, which is attributed to industrial source like veterinary chemicals, pharmaceuticals, pesticide industries, etc. Fourteen villages of this area of Patancheru were assessed for arsenic contamination by collecting samples of water (surface and ground), soil, fodder, milk, and vegetables. The total arsenic content in the whole blood, urine, hair, and nails of the residents showing arsenical skin lesions and other clinical manifestations were also studied. To understand the bioavailability of arsenic in this environment and its possible entry into human food chain, speciation studies of arsenic was carried out and the results are presented in this paper.     

Scales of justice: Is there a geographic bias in environmental equity analysis?

Many empirical environmental justice (EJ) studies lack a systematic framework in which to undertake research and interpret results. This paper characterizes the conventional EJ study and examines how results can be influenced by the choice of the spatial scale and scope of analysis. After thoroughly reviewing a sample of prominent EJ studies, a conventional EJ study was performed for (Superfund) National Priorities List sites at multiple scales and scopes. It was found that evidence of environmental injustice could be sensitive to scale and scope chosen, which partly explains the observed inconsistency in the empirical literature. Implications for interpreting existing EJ research and conducting future EJ research are discussed.     

Recycling municipal incinerator fly- and scrubber-ash into fused slag for the substantial replacement of cement in cement-mortars

Fly- and scrubber-ash (weight ratio of approximately 1:3) from municipal solid waste incinerators (MSWI) are a major land-fill disposal problem due to their leaching of heavy metals. We uniformly mixed both types of ash with optimal amounts of waste glass frit, which was then melted into a glassy slag. The glassy slag was then pulverized to a particle size smaller than 38 μm for use as a cement substitute (20–40% of total cement) and blended with sand and cement to produce slag-blended cement-mortar (SCM) specimens. The toxicity characteristics of the leaching procedure tests on the pulverized slag samples revealed that the amount of leached heavy metals was far below regulatory thresholds. The compressive strength of the 28-day cured SCM specimens was comparable to that of ordinary Portland cement mortars, while the compressive strength of specimens cured for 60 or 90 days were 3–11% greater. The observed enhanced strength is achieved by Pozzolanic reaction. Preliminary evaluation shows that the combination of MSWI fly- and scrubber-ash with waste glass yields a cost effective and environmentally friendly cement replacement in cement-mortars.     

使用高分辨色质联机AUTOSPEC-ULTIMANT分析二噁英及呋喃

"二噁英"是指具有相似化学结构和生物特征的一族化合物,分别属于三大类别:多氯代二苯并二噁英(PC-DDs),多氯代二苯并呋喃(PCDFs)以及多氯联苯(PCBs).PCDDs和PCDFs无商业目的性生产,而是在大量的人类活动中产生的.自然过程也可以产生PCDDs和PCDFs.在过去的十年里,环境立法机构和企业一起致力于减少二噁英的排放.     

Fuelwood assessment at the micro-watershed level:a case study in Garhwal Himalaya,India

Biomass,as fuelwood,is one of the major sources of energy in rural areas,especially in the mountainous regions of the world.As the increasing human population exerts more pressure on the forest thereby inducing an adverse effect on the sustainability of the ecosystem,which consequently causes fuelwood crisis at a local level,this crisis is spatio-temporal in nature.Thus,the major objective of this study is to assess the sustainability of fuelwood at different probable scenarios at a micro watershed level.The present study was conducted in the Phakot watershed,the Tehri Garhwal district of central Himalaya in India,during 2006-2008.Based on the vegetation composition in the study area,the net primary productivity(NPP)value of the Oak forest,and mixed oak and sal forests,was used for the quantification of fuelwood availability in evergreen and deciduous forests,respectively.The fuelwood demand was calculated on the basis of seasonal fuelwood consumption values.Nine probable permutations for availability-demand scenarios assuming the existence of high(H),low(L)and average(A)conditions were analyzed for evaluating the stress.The available annual harvestable fuelwood in the watershed is in the minimum and maximum ranges of 2283.28 to 4066.00 tons,respectively,per year whereas it has a demand of 110.76 tons as the minimum to 3659 tons as the maximum annually.This shows that in the current availabilitydemand scenario,the watershed does not have fuelwood crisis in the present situation but needs to maintain the sustainability of the system.Based on our study,it is concluded that,globally,more spatio-temporal study is required to understand the issues at the local level.     

Air assimilative capacity-based environment friendly siting of new industries--a case study of Kochi region, India

Air pollution has become a matter of grave concern, particularly in mega-cities and urban areas, where the situation is alarming and becoming more and more severe day-by-day and warrants, therefore, careful planning to facilitate future industrial development. Site selection, with the objective of minimizing adverse environmental impacts based on environmental criteria is a vital prerequisite, particularly for air polluting industries. In order to locate any air polluting industry, the assimilative capacity of the region needs to be assessed carefully and planned accordingly, so that the receiving environment is not adversely affected. Assimilative capacity of a region/airshed, widely represented through the ventilation coefficient by many researchers in the past, does not give a clear picture about the amount of emission load that can be assimilated in a given region. The ventilation coefficient, at best, can only present a broad picture about the air pollution dispersion potential (low, medium or high) of the region. A modified approach, which utilizes air quality modelling as a tool to estimate the maximum allowable emission load that a region can assimilate without violating the stipulated standards, has been used for estimating the assimilative capacity of the air environment. Details of this approach have been presented in this paper through a case study carried out for the Kochi region, located in the Kerala State of India. A variety of emission and meteorological scenarios have been considered and critical emission loads have been estimated. This approach shall provide necessary technical guidance to the environmental regulatory authorities as well as to the industries in planning environment friendly industrial development.     

In vitro brain acetylcholinesterase response among three inbred strains of mice to monocrotophos.

The strain differences in the neurotoxic potential of monocrotophos (MCP) were assessed by determining the inhibition of brain acetylcholinesterase (AChE) in BALB/cAnN, DBA/2J and C57BL/6J in vitro. MCP being a competitive inhibitor for AChE, alters the Km values widely among these inbred strains. Comparatively least alterations in Km were found in BALB/cAnN and maximum in DBA/2J. Based on the Ki values DBA/2J was found to be the most sensitive strain to MCP inhibition followed by C57BL/6J and BALB/cAnN.     

Assessing impacts of partial mass depletion in DNAPL source zones: II. Coupling source strength functions to plume evolution

Analytical solutions, describing the time-dependent DNAPL source-zone mass and contaminant discharge rate, derived previously in Part I [Falta, R.W., Rao, P.S., Basu, N., this issue. Assessing the impacts of partial mass depletion in DNAPL source zones: I. Analytical modeling of source strength functions and plume response. J. Contam. Hydrol.] are used as a flux-boundary condition in a semi-analytical contaminant transport model. These analytical solutions assume a power relationship between the flow-averaged source concentration, and the source DNAPL mass; the empirical exponent (gamma) is a function of the flow field heterogeneity, DNAPL architecture, and the correlation between them. The DNAPL source strength terms can account for partial source remediation, either at time zero, or at some later time after the DNAPL release. The transport model considers advection, retardation, three-dimensional dispersion, and sequential first-order decay/production of several species. A separate solution is used to compute the time-dependent mass of each contaminant in the plume. A series of examples using different values of gamma shows how the benefits of partial DNAPL source remediation can vary with site conditions. In general, when gamma>1, relatively large short-term reductions in the plume concentrations and mass occur, but the source longevity is not strongly affected. Conversely, when gamma<1, the short-term reductions in the plume concentrations and mass are smaller, but the source longevity can be greatly reduced. In either case, the source remediation effort is much more effective if it is undertaken at an early time, before much contaminant mass has entered the plume. If the remediation effort is significantly delayed, the leading parts of the plume are not affected by the source remediation, and additional control or remediation of the plume itself is required.