Bacteriophage Therapy for Critical and High-Priority Antibiotic-Resistant Bacteria and Phage Cocktail-Antibiotic Formulation Perspective

Food and Environmental Virology - Phage therapy is revolving to address the issues mainly dealing with antibiotic resistance in the pathogenic bacteria. Among the drug-resistant microbial...     

Comparative study on the effect of chemicals on Alternaria blight in Indian mustard--a multi-location study in India

High severity of Altemaria blight disease is a major constraint in production of rapeseed-mustard in India. The aim of this study was to investigate the suppressive potential of chemicals viz., zinc sulphate, borax, sulphur, potash and calcium sulphate, aqueous extracts viz., Eucalyptus globosus (50 g l-1) leaf extract and garlic (Allium sativum) bulb (20 g l-1) extract, cow urine and bio-agents Trichoderma harzianum, Pseudomonas fluorescence in comparison with the recommended chemical fungicide (mancozeb), against foliar disease Alternaria blight of Indian mustard [Brassica juncea (L.) Czern. and Coss] under five different geographical locations of India. Mancozeb recorded the lowest mean severity (leaf: 33.1%; pod: 26.3%) of Alternaria blight with efficacy of garlic bulb extract alone (leaf = 34.4%; pod = 27.3%) or in combination with cow urine (leaf = 34.2%; pod = 28.6%) being statistically at par with the recommended chemical fungicide. Chemicals also proved effective in reducing Alternaria blight severity on leaves and pods of Indian mustard (leaf = 36.3-37.9%; pod = 27.5-30.1%). The effective treatments besides providing significant reduction in disease severity also enabled increase in dry seed yield of the crop (mancozeb = 2052 kg ha-1; garlic = 2006 kg ha-1; control = 1561 kg ha-1).     

Electricity nanogenerator from egg shell membrane: A natural waste bioproduct

ABSTRACT

In the era of developing technologies, there is always been a crisis of rising demands of energy. There is no skepticism that a lot of energy is being produced every hour for almost each and every field, but still an exploration is needed to come up with new and viable options for energy creation. The same is the objective of this paper which proposes the use of waste biomaterials in association with organic and inorganic materials as a source of energy to power up small electronic devices. In this research egg shell membrane (ESM)-based triboelectric nanogenerator (TENG) is proposed in combination with calotropis (Calo), cellulose from fruit of Bombax Ceiba (BOM), cellulose in form of tissue paper (TISU), dog hair (DH), polytetrafluoroethylene (PTFE), aluminum (Al), and copper (Cu). ESM is eco-friendly waste food by-product and available in abundance. Characterization of ESM is done by scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectrophotometer (FTIR). The proposed ESM-PTFE-based TENG power up 462 green LEDs (462 × 2 V = 924 V ~ 1 kV) without rectifier and produced up to 7.61 µJ energy with 4.7 µF capacitor at 200 tapings. All the proposed ESM-based TENG combinations generate sufficient voltage to turn ON the wrist watch. This green-energy-based TENG has potential application in various fields especially related to medical devices.     

Assessment of radon concentration and heavy metal contamination in groundwater of Udhampur district,Jammu & Kashmir,India

Radon concentration was measured in water samples of 41 different locations from Udhampur district of Jammu & Kashmir, India, by using RAD7 and Smart RnDuo monitor. The variation of radon concentration in water ranged from 1.44 ± 0.31 to 63.64 ± 2.88 Bq L^?1, with a mean value of 28.73 Bq L^?1 using RAD7 and 0.64 ± 0.28 to 52.65 ± 2.50 Bq L^?1, with a mean value of 20.30 Bq L^?1 using Smart RnDuo monitor, respectively. About 17.07% of the studied water samples recorded to display elevated radon concentration above the reference range suggested by United Nation Scientific Committee on the Effects of Atomic Radiations (UNSCEAR). The mean annual effective dose of these samples was determined, and 78.95% samples were found to be within the safe limits set by World Health Organisation (WHO) and European Council (EU). The study revealed good agreement between the values obtained with two methods. Heavy metals (Zn, Cd, Fe, Cu, Ni, As, Hg, Co, Pb and Cr) were determined in water samples by microwave plasma atomic emission spectrometer, and their correlation with radon content was also analysed.     

Comparison of a Subjective and a Physical Approach for Identification of Priority Areas for Soil and Water Management in a Watershed – A Case Study of Nagwan Watershed in Hazaribagh District of Jharkhand, India

The present investigation was an attempt to compare the within-watershed prioritization capabilities of a physical model based SDSS with the SYI and RPI model based subjective-SDSS, conventionally devised for between-watershed prioritizations, by All India Soil Survey and Land Use Planning Division of Ministry of Agriculture, Government of India. Application of these two approaches on a test watershed situated in Damodar-Barakar catchment in India, the second most seriously eroded area in the world, demonstrated that the proposed physical model based SDSS was capable of realistically and logically mimicking the sub-watershed-scaled water and soil losses thereby suggesting its immense application potential for priority area identification within the test watershed. In contrast to the proposed physical method, the subjective approaches, which assigned totally reverse priorities to about 67–93% of the test-sub-watersheds, were observed to be incapable of realistically assessing the impact of topography and varied land use and soil types in the test watershed on their sub-watershed scaled run-off and soil loss generating potential. Besides, the physical approach could be used for assessing the annual dynamics of the total water and sediment yields, under prevailing resource management systems in the test watershed with good to moderately good correlation coefficients of 0.83 and 0.65; model efficiency coefficients of 0.54 and 0.70; mean relative errors of –4.28% and –17.97% and root mean square prediction errors of 71.8 mm and 9.63 t/ha, respectively.     

Evidences showing 2,4-D ethyl ester and pencycuron-induced DNA damage in cyanobacteria and detection by PCR

The impact of 2,4-D ethyl ester and pencycuron in inducing DNA damage in three species of cyanobacteria-Anabaena fertilissima, Aulosira fertilissima, and Westiellopsis prolifica as evidenced by PCR-based assays: RAPD and 16S rRNA amplification was examined. Exposure of genomic DNA (in vitro) to pencycuron for 4 days did not produce severe damage in DNA fragments of all three cyanobacterial species whereas exposure to 2,4-D ethyl ester markedly inhibited the template activity of genomic DNA compared to untreated cultures of A. fertilissima. In A. fertilissima a single band of approximately 1000?bp was observed even after 16 days of exposure to 60?ppm pencycuron which suggests that certain segments of DNA are resistant to pencycuron DNA damaging effects. However, a significant effect was observed in the case of W. prolifica for 2,4-D ethyl ester and pencycuron where complete disappearance of fragments was not recorded even after 16 days of incubation and interestingly some new DNA bands were induced. Similar to the effects with RAPD profile, amplification of rRNA was significantly inhibited following exposure of genomic DNA to 2,4-D ethyl ester and pencycuron. Our findings clearly demonstrate that pesticide concentrations affected cyanobacterial DNA and lethality of these microbes might be due to irreversible DNA damage. Thus, it is postulated that PCR assays may be conveniently used for screening DNA damage produced by 2,4-D ethyl ester and pencycuron in all three cyanobacteria examined in this study.     

Use of recycled plastic in concrete: a review

Numerous waste materials are generated from manufacturing processes, service industries and municipal solid wastes. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. Solid waste management is one of the major environmental concerns in the world. With the scarcity of space for landfilling and due to its ever increasing cost, waste utilization has become an attractive alternative to disposal. Research is being carried out on the utilization of waste products in concrete. Such waste products include discarded tires, plastic, glass, steel, burnt foundry sand, and coal combustion by-products (CCBs). Each of these waste products has provided a specific effect on the properties of fresh and hardened concrete. The use of waste products in concrete not only makes it economical, but also helps in reducing disposal problems. Reuse of bulky wastes is considered the best environmental alternative for solving the problem of disposal. One such waste is plastic, which could be used in various applications. However, efforts have also been made to explore its use in concrete/asphalt concrete. The development of new construction materials using recycled plastics is important to both the construction and the plastic recycling industries. This paper presents a detailed review about waste and recycled plastics, waste management options, and research published on the effect of recycled plastic on the fresh and hardened properties of concrete. The effect of recycled and waste plastic on bulk density, air content, workability, compressive strength, splitting tensile strength, modulus of elasticity, impact resistance, permeability, and abrasion resistance is discussed in this paper.     

Evaluation of air pollution tolerance index and anticipated performance index of plants and their application in development of green space along the urban areas

Air pollution due to vehicular emissions has become one of the most serious problems in the whole world and has resulted in huge threat to both the environment and the health of living organisms (plants, humans, animals, microorganisms). Plants growing along the roadsides get affected at the maximum as they are the primary recipients to different air pollutants and show varied levels of tolerance and sensitivity. Taking this into account, the present work was based on assessment of seasonal variation in air pollution tolerance index (APTI) and anticipated performance index (API) of four roadside plants, namely, Alstonia scholaris, Nerium oleander, Tabernaemontana coronaria, and Thevetia peruviana belonging to family Apocynaceae. APTI was calculated by the determination of four important biochemical parameters, viz., pH, relative water content (RWC), total chlorophyll (TChl), and ascorbic acid (AsA) content of leaves. The leaf samples were collected from plants growing at seven different sites of Amritsar (Punjab), India, for pre-monsoon and post-monsoon seasons. Highest APTI (82.14) was reported in N. oleander during the pre-monsoon season while the lowest was recorded in T. coronaria (18.59) in the post-monsoon season. On the basis of API score, A. scholaris was anticipated to be an excellent performer during the pre-monsoon and post-monsoon seasons followed by N. oleander, T. coronaria, and T. peruviana. Linear regression analysis and Pearson’s correlation coefficient depicted significant positive correlation between APTI and ascorbic acid content during the pre-monsoon and post-monsoon seasons.     

Development of Bioactive Packaging Structure Using Melt Electrospinning

Recent research attention is shifting towards the use of bioactive antimicrobial and/or antioxidant packaging materials and their fabrication with non-toxic techniques. The process of melt electrospinning produce fibers from polymer melt without any solution hence environmentally friendly because use of toxic solvents can be avoided. The objectives of this study were fabrication of biodegradable polymeric microfibrous structure using melt electrospinning and characterization of the effect of plant based natural extract on fabricated structure. We found that incorporation of this structure with natural extract provide sufficient support for bioactive compounds without changing thermal stability, physical properties and amorphous phase and also increase the antimicrobial efficacy. Moreover, homogeneously dispersion and good interaction of polymer and natural plant based extract demonstrating the potential of such polymer blend as a bioactive antimicrobial material for packaging industry including especially food and healthcare.