Sugarcane bagasse into value-added products: a review

Environmental Science and Pollution Research - Strategic valorization of readily available sugarcane bagasse (SB) is very important for waste management and sustainable biorefinery. Conventional SB...     

Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.

     

Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

     

Environmental and health impacts of spraying COVID-19 disinfectants with associated challenges

Environmental Science and Pollution Research - Coronavirus refers to a group of widespread viruses. The name refers to the specific morphology of these viruses because their spikes look like a...     

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Water scarcity necessitates a cost-effective and productive solution. This study focused to enhance the productivity of single slope solar still by incorporating the better weight of palm flower powder (micro-sized) in the basin and micro phase change material heat storage bed under the basin. In this aspect, the different quantity of palm powder weights such as 10, 30, 50, 70, 100, 120 and 150 g in the basin was experimentally examined. The absorber basin containing 50 g of palm powder has better productivity of 37.25%, whereas for 10, 30, 70, 100, 120 and 150 g, they were 11.85, 24.78, 36.8, 33.05, 10.25 and ? 20.22% respectively. The influence of palm powder with different weight% impregnated in the paraffin wax was analysed. The maximum thermal conductivity of 0.33 W/m K was obtained in the sample containing palm flower powder of 20 wt%. The experimental investigation was carried out with 50 g of micro-sized palm powder in the basin and thermal storage bed under the basin containing 20 wt% of micro phase change material (PCMPFP-SS) and conventional solar still (CSS). The overall distillate output of PCMPFP-SS was 4670 and 4250 mL/m² on day 1 and day 2 respectively. On the other hand, the overall distillate output for CSS was 3030 and 2800 mL/m² on day 1 and day 2. From the economic analysis, it was found that the cost per litre (CPL) of PCMPFP-SS and CSS was $ 0.025 and $ 0.032 respectively. Moreover, the payback period of PCMPFP-SS was lowered from 5.1 to 4.1 months compared to CSS.

     

Next-generation sequencing in the biodiversity conservation of endangered medicinal plants

Environmental Science and Pollution Research - Medicinal plants have been used as traditional herbal medicines in the treatment of various types of diseases. However, the increased demand for these...     

Focusing the pivotal role of nanotechnology in Huntington’s disease: an insight into the recent advancements

Environmental Science and Pollution Research - Neurodegeneration is the loss of neuronal capacity and structure over time which causes neurodegenerative disorders like Alzheimer, amyotrophic...     

Occurrence and seasonal variation of bacterial indicators of faecal pollution along Thoothukudi Coast, Tamil Nadu

Theprevalence and seasonal variation of bacterial indicators of faecal pollution such as total coliform bacteria, faecal coliform bacteria, Escherichia coli and faecal streptococci were investigated in samples of water and beach sand from the four fish landing centres of Thoothukudi. Further the samples were screened for Salmonella to study the reliability of faecal indicator bacteria as an index of human pathogenic bacteria. Total coliform bacteria, faecal coliform bacteria and Escherichia coli were isolated from all four landing centres from undetectable to the maximum detectable level of over Most Probable Number 140 throughout the year with no obvious seasonal variation. Faecal streptococci were also detected in most samples. There was no discernable relationship between faecal indicators and physical parameters. The relationship between faecal indicators and Salmonella was not significant (p > 0.05). The results showed that the coastal waters along Thoothukudi is polluted and presents a potential risk to public for recreational and fishing activities.     

Metals concentration associated with respirable particulate matter (PM10) in industrial area of Eastern U.P. India

The present study deals with the assessment of ambient air quality with respect to respirable suspended particulate matter (RSPM or PM10 < or = 10 microm) and trace metals (Fe, Zn, Cu, Cr Ni, Cd, Mn and Pb) concentrations in RSPM at five locations of Renukoot, an industrial area of Eastern Uttar Pradesh. The 24 hr mean concentrations of PM10 ranged between 69.3 to 118.9 microg m(-3), which is well within the permissible limit (150 microg m(-3)) of national ambient air quality standards (NAAQS) but found higher than the prescribed annual daily limit of US EPA (50 microg m(-3)). The ambient air was mostly dominated by the Fe and least by the Cd among the metal analysed. Murdhawa, a commercial place influenced by vehicular population, is found to be the most polluted area of Renukoot and Dongia nalla (forest area) the least. The ambient air of Murdhawa is rich in Cu and Ni, indicating contribution of mobile sources. The Rammandir a residential place near the industry, is rich in Cd and Cr suggesting contribution of point sources. The Ni concentration is found to be alarmingly high in the air at all the locations except Dongia nallah, when compared with the EC (European Commission) limit (20 ng m(-3)). The Cd concentration is found to be higher only at Rammandir as compared with the EC limit (5 ng m(-3)). Mean concentrations of Zn, Pb and Mn are found to be almost equal in the ambient air of all the locations, suggesting the significance of sources contributing to presence of these metals. Zn, Cu, Pb and Ni having a significant correlation with PM10 indicate the same source contributing these metals as well as PM10. The present study has focused on the quantitative variation in different metals in the PM10, which is extremely harmful due to their toxic and carcinogenic nature.     

Photo detoxification of solubilized vat dye effluent using different pH ranges

The removal of solubilized vat dye effluent using photo detoxification method was studied at various pH ranges. Experiments were carried out with synthetic effluent using total dye concentrations of 50, 100, 200, 300, and 350 mg/L. In sunlight photo oxidation, the original soluble vat dye is precipitated and can be filtered and reused by the textile industries. The effect of the different concentrations (1,000, 2,000, 3,000 mg/L) of total dissolved solids on the removal of vat dye was also carried out in the photo detoxification process. The efficiency of the dye removal was found to be 99 %.