Non-powered hand tool improvement research for prevention of work-related problems: a review

Purpose. In lower-middle-income countries, most of the work is performed manually using non-ergonomic hand tools which results in work-related health problems. Using hand tools designed in line with ergonomic principles may play an important role in reducing work-related health concerns significantly. Methods. Scientific databases (PubMed, EBSCOhost) and e-publishers were searched for articles from 1985 to 2015 using the following keywords: ‘hand tool’, ‘ergonomics’, ‘usability’ and ‘design’. After applying selection criteria to 614 articles, 58 articles related to the physical design of hand tools were selected. Results. Seventeen articles were related to hand tool improvement in the manufacturing sector. Musculoskeletal disorders were found to be the most frequently occurring work-related health problems. Most of the articles focused on product and qualitative variables for improvement in hand tools, while few articles considered human and task variables. Conclusions. Literature shows that hand tool improvement studies have been given less importance in low-income and lower-middle-income countries. However, some work of significance is reported in the agriculture sectors of these countries. Hence, it is concluded that ergonomic intervention in hand tools is much needed for those industries which employ traditional methods of working.     

Is Globalization Detrimental to CO<Subscript>2</Subscript> Emissions in Japan? New Threshold Analysis

Using annual data from 1970 to 2014, this paper examines the effects of globalization on CO₂ emissions in Japan while accounting for economic growth and energy consumption as potential determinants of carbon emissions. The structural breaks and asymmetries arising due to policy shifts require attention, and hence, an asymmetric threshold version of the ARDL model is utilized. The results show the presence of threshold asymmetric cointegration between variables. Threshold-based positive and negative shocks arising from globalization increase carbon emissions, while the impact of the latter is more profound. Energy consumption (economic growth) also has a significant positive effect on carbon emissions. Globalization, economic growth, and energy consumption significantly increase carbon emissions in the short run. We suggest that policy makers in Japan consider globalization and energy consumption as policy tools in formulating their policies regarding protecting sustainable environmental quality in the long run. Otherwise, the Japanese economy may continue to face environmental consequences such as undesirable climate change and massive warming at the micro and macro levels as a result of potential shocks arising from globalization and energy consumption.     

Characterization of MAR and heavy metal-tolerant <Emphasis Type="Italic">E</Emphasis>. <Emphasis Type="Italic">coli</Emphasis> O157:H7 in water sources: a suggestion for behavioral intervention

The water sources in developing countries are usually contaminated with the members of enterobacteriaceae leading to gastrointestinal infections. There has been an increasing consumption of antibiotics during last decade in India. The development of multiple antibiotic resistance and heavy metal tolerance among waterborne bacteria has been coexisting traits. Keeping above features in view, 51 waterborne isolates of Escherichia coli O157:H7 have been characterized in the present study. The disk diffusion test for antibiotic sensitivity assay revealed that all the isolates were resistant to at least one or more antibiotics. Cephalosporins were least effective, while fluoroquinolones and aminoglycosides were most effective antibiotics. The isolates shared resistance pattern similarities regardless of their sources. The isolates were subjected to test maximum tolerance concentration of heavy metals such as arsenic, lead, chromium and mercury. About 98% isolates tolerated arsenic at 250 μg ml^?1 or various above concentrations. Mercury >25 μg ml^?1 was not tolerated by more than 90% isolates. In dug well, a commonly used water source in rural India, the isolates exhibited multiple antibiotic resistance index of 0.68 indicating it as high risk contaminating source. PCR–RFLP of 16S rDNA distinguished isolates into four groups with the smallest group represented by 3 isolates. Three isolates belonged to different sources but shared all the features of biochemical, serological, multiple antibiotic resistance and heavy metal tolerance test. 16S rDNA sequence analysis showed that the three selected isolates were closely related to each other. Based on the microbial and molecular findings, the study recommends to follow social cognitive theory to alter the behavior of the local communities for sustainable use of water resources.     

Spatial analysis of soil resources in the Mewat district in the semiarid regions of Haryana,India

The soil characteristics are critical for crop health and its yield and therefore for agriculture. The soil properties are spatially variable and therefore soil resources should be managed as per location-specific requirements. An integrated spatial analysis of the soil resources of Mewat district was conducted to identify the soil resource management zones to develop site-specific soil management plan which might lead to sustained and enhanced crop yield. Spatial analysis of soil resources was conducted by modeling soil fertility and erosion which determines the crop productivity in the region. Soil fertility of the region was modeled using weighted overlay approach using 10 soil parameters, namely nitrogen, phosphorus, potassium, sulfur, iron, zinc, manganese, organic carbon, electrical conductivity, and pH. Each parameter was assigned weights based on their relative importance to agricultural productivity. The modeled soil fertility was classified into three fertility zones, low, medium, and high. Soil fertility was found to be low to moderate in 65% of the area, largely because of the low nitrogen, soil organic carbon, phosphorus concentration, and excessive salinity. Soil erosion was modeled using the universal soil loss equation (USLE) model by estimating rainfall erosivity factor (R), the soil erodibility factor (K), the topographic factors (L and S), cropping factor (C), and the conservation practice factor (P). Soil erosion problems were limited to areas having high elevation with barren land and areas with minimal management practices. The severity of soil erosion was found high in 15% of the region, while the remaining 85% showed low to moderate erosion. Soil fertility and erosion were integrated using the multivariate clustering method to identify soil management zones. The region was delineated into three soil management zones. Zone I (29%) which covers majorly Tarou block, was characterized by high soil fertility and low soil erosion. Zone II (18%) with medium soil fertility and high erosion covers villages of Taoru, Nuh, Nagina, FP Jhirka, and Punhana, which are located in the foothills of Aravalli ranges. Zone III represents the major part of the region, covering Nuh, Nagina, and FP Jhirka blocks (54%) with low soil fertility and erosion conditions. Thus, within the study area, the soil management domains are spatially variable in terms of fertility and soil erosion, and thus zone-specific soil management measures are required to improve the soil condition in order to sustain and improve agriculture production. The study would help the policy makers to design site-specific planning for identified soil resource management zones.     

End-Of-Life Textiles as Reinforcements in Biocomposites

A number of attempts have been made to recycle cotton/polyester blend woven fabrics after use; however, most of these fabrics are disposed of in landfills. Major part of these blend fabrics are not recycled due to complexity of the fibre arrangement and cannot be separated economically. This study shows that these discarded woven fabrics could be directly used as reinforcements in composites without fibre separation. Uniform alignment in the woven fabric provided consistent properties to the composites. The fabrics were reinforced by soybean-based-bioresins to produce biocomposites. The composites were analysed for mechanical, thermal, viscoelastic and morphological properties. Porosity and wettability of the composites were also evaluated. Results demonstrate that the tensile strength and modulus of over 100 and 10 MPa, respectively, can be obtained without any fibre treatment. Furthermore, impact strength over 70 kJ/m² was obtained without any chemical treatment on fibres. The porosity of the composites produced was less than 9 vol%. Additionally, the fabrics were treated with alkali in order to improve the fibre–matrix interface and the composite properties were studied. From the economical perspective, these composites can be produced at a low cost as the major component is available for free or low cost.     

Studies on thermo-chemical treatment of recycled concrete fine aggregates for use in concrete

Journal of Material Cycles and Waste Management - The presence of cement paste is the most important factor affecting the quality of recycled concrete fine aggregates. This study aims to develop...     

Treatment of Arctic wastewater by chemical coagulation,UV and peracetic acid disinfection

Conventional wastewater treatment is challenging in the Arctic region due to the cold climate and scattered population. Thus, no wastewater treatment plant exists in Greenland, and raw wastewater is discharged directly to nearby waterbodies without treatment. We investigated the efficiency of physicochemical wastewater treatment, in Kangerlussuaq, Greenland. Raw wastewater from Kangerlussuaq was treated by chemical coagulation and UV disinfection. By applying 7.5 mg Al/L polyaluminium chloride (PAX XL100), 73% of turbidity and 28% phosphate was removed from raw wastewater. E. coli and Enterococcus were removed by 4 and 2.5 log, respectively, when UV irradiation of 0.70 kWh/m³ was applied to coagulated wastewater. Furthermore, coagulated raw wastewater in Denmark, which has a chemical quality similar to Greenlandic wastewater, was disinfected by peracetic acid or UV irradiation. Removal of heterotrophic bacteria by applying 6 and 12 mg/L peracetic acid was 2.8 and 3.1 log, respectively. Similarly, removal of heterotrophic bacteria by applying 0.21 and 2.10 kWh/m³ for UV irradiation was 2.1 and greater than 4 log, respectively. Physicochemical treatment of raw wastewater followed by UV irradiation and/or peracetic acid disinfection showed the potential for treatment of arctic wastewater.     

Indexing method for assessment of pollution potential of leachate from non-engineered landfill sites and its effect on ground water quality

Dumping of solid waste in a non-engineered landfill site often leads to contamination of ground water due to leachate percolation into ground water. The present paper assesses the pollution potential of leachate generated from three non-engineered landfill sites located in the Tricity region (one each in cities of Chandigarh, Mohali and Panchkula) of Northern India and its possible effects of contamination of groundwater. Analysis of physico-chemical properties of leachate from all the three landfill sites and the surrounding groundwater samples from five different downwind distances from each of the landfill sites were collected and tested to determine the leachate pollution index (LPI) and the water quality index (WQI). The Leachate Pollution Index values of 26.1, 27 and 27.8 respectively for landfill sites of Chandigarh (CHD), Mohali (MOH) and Panchkula (PKL) cities showed that the leachate generated are contaminated. The average pH values of the leachate samples over the sampling period (9.2 for CHD, 8.97 for MOH and 8.9 for PKL) show an alkaline nature indicating that all the three landfill sites could be classified as mature to old stage. The WQI calculated over the different downwind distances from the contamination sites showed that the quality of the groundwater improved with an increase in the downwind distance. Principal component analysis (PCA) carried out established major components mainly from natural and anthropogenic sources with cumulative variance of 88% for Chandigarh, 87.1% for Mohali and 87.8% for Panchkula. Hierarchical cluster analysis (HCA) identifies three distinct cluster types for the groundwater samples. These clusters corresponds to a relatively low pollution, moderate pollution and high pollution regions. It is suggested that all the three non-engineered landfill sites be converted to engineered landfill sites to prevent groundwater contamination and also new sites be considered for construction of these engineered landfill sites as the present dumpsites are nearing the end of their lifespan capacity.     

Achieving sustainable development goals through participatory forest management: Examples from South-Eastern Bangladesh

Forests managed through peoples' participation can help to achieve a number of sustainable development goals (SDGs). This paper, drawing data from four participatory forest management (PFM) projects in south-eastern Bangladesh, explored: (a) the factors that influenced the outcomes of PFM; and (b) contribution of PFM towards achieving selected SDGs. The research used observation, semi-structured household interviews, group discussions, vegetation survey and Ostromʼs design principles for data collection, Divergent forest conditions and factors in four PFM sites have had differential contribution to SDGs. Heterogeneity of user groups, insufficient coordination, absence of motivation, and land tenure conflicts had affected the attainment of SDGs. The PFM helped to achieve 9–11 SDGs comprising poverty reduction (Goal 1), improving food security (Goal 2), maintaining health and well-being (Goal 3), enhancing childrensʼ education (Goal 4), fair access to jobs and committees (Goals 5 and 10), sources of clean drinking water (Goal 6), affordable energy for cooking (Goal 7), increased household economy (Goal 8), climate change through carbon sequestration (Goal 13), forest conservation (Goal 15), and partnerships with relevant institutions (Goal 16). In order to achieve SDGs, PFM could be viewed as an integral part of government development strategies, which needs sectoral coordination and integration of relevant policies.