On-road emissions of CO, CO2 and NOX from four wheeler and emission estimates for Delhi

This study presents the emission factor of gaseous pollutants(CO, CO_2, and NO X) from on-road tailpipe measurement of 14 passenger cars of different types of fuel and vintage. The trolley equipped with stainless steel duct, vane probe velocity meter, flue gas analyzer, Nondispersive infra red(NDIR) CO_2 analyzer, temperature, and relative humidity(RH) sensors was connected to the vehicle using a towing system. Lower CO and higher NO X emissions were observed from new diesel cars(post 2010) compared to old cars(post 2005), which implied that new technological advancement in diesel fueled passenger cars to reduce CO emission is a successful venture,however, the use of turbo charger in diesel cars to achieve high temperature combustion might have resulted in increased NO X emissions. Based on the measured emission factors(g/kg), and fuel consumption(kg), the average and 95% confidence interval(CI) bound estimates of CO, CO_2,and NO X from four wheeler(4W) in Delhi for the year 2012 were 15.7(1.4–37.1), 6234(386–12,252),and 30.4(0.0–103) Gg/year, respectively. The contribution of diesel, gasoline and compressed natural gas(CNG) to total CO, CO_2 and NO X emissions were 7:84:9, 50:48:2 and 58:41:1respectively. The present work indicated that the age and the maintenance of vehicle both are important factors in emission assessment therefore, more systematic repetitive measurements covering wide range of vehicles of different age groups, engine capacity, and maintenance level is needed for refining the emission factors with CI.     

Identification and quantitation of volatile organic compounds emitted from dairy silages and other feedstuffs

High ground-level ozone continues to be an important human, animal, and plant health impediment in the United States and especially in California's San Joaquin Valley (SJV). According to California state and regional air quality agencies, dairies are one of the major sources of volatile organic compounds (VOCs) in the SJV. A number of recently conducted studies reported emissions data from different dairy sources. However, limited data are currently available for silage and otherfeed storages on dairies, which could potentially contribute to ozone formation. Because the impact of different VOCs on ozone formation varies significantly from one molecular species to another, detailed characterization of VOC emissions is essential to include all the important contributors to atmospheric chemistry and especially atmospheric reactivity. The present research study identifies and quantifies the VOCs emitted from various silages and other feedstuffs. Experiments were conducted in an environmental chamber under controlled conditions. Almost 80 VOCs were identified and quantified from corn (Zea mays L.), alfalfa (Medicago sativa L.),and cereal (wheat [Triticum aestivum L.] and oat [Avena sativava L.] grains) silages, total mixed ration (TMR), almond (Amygdalus communis L.) shells and hulls using gas chromatography-mass spectrometry and high performance liquid chromatography. The results revealed high concentrations of emitted alcohols and other oxygenated species. Lower concentrations of highly reactive alkenes and aldehydes were also detected. Additional quantitation and monitoring of these emissions are essential for assessment of and response to the specific needs of the regional air quality in the SJV.     

An Assessment of U(VI) removal from groundwater using biochar produced from hydrothermal carbonization

The ever-increasing growth of biorefineries is expected to produce huge amounts of lignocellulosic biochar as a byproduct. The hydrothermal carbonization (HTC) process to produce biochar from lignocellulosic biomass is getting more attention due to its inherent advantage of using wet biomass. In the present study, biochar was produced from switchgrass at 300 °C in subcritical water and characterized using X-ray diffraction, fourier transform infra-red spectroscopy, scanning electron micrcoscopy, and thermogravimetric analysis. The physiochemical properties indicated that biochar could serve as an excellent adsorbent to remove uranium from groundwater. A batch adsorption experiment at the natural pH (~3.9) of biochar indicated an H-type isotherm. The adsorption data was fitted using a Langmuir isotherm model and the sorption capacity was estimated to be ca. 2.12 mg of U g(-1) of biochar. The adsorption process was highly dependent on the pH of the system. An increase towards circumneutral pH resulted in the maximum adsorption of ca. 4 mg U g(-1) of biochar. The adsorption mechanism of U(VI) onto biochar was strongly related to its pH-dependent aqueous speciation. The results of the column study indicate that biochar could be used as an effective adsorbent for U(VI), as a reactive barrier medium. Overall, the biochar produced via HTC is environmentally benign, carbon neutral, and efficient in removing U(VI) from groundwater.     

Characterization of protease from Alcaligens faecalis and its antibacterial activity on fish pathogens

Alcaligens faecalis AU01 isolated from seafood industry effluent produced an alkaline protease. The optimum culture conditions for growth as well as enzyme production were 37 degrees C and pH 8. The partially purified protease had specific activity of 9.66 with 17.77% recovery with the molecular weight of 33 kDa and it was active between 30-70 degrees C and optimum being at 55 degrees C and pH 9. The enzyme retains more than 85% activity at 70 degrees C and 78% even at pH 10. The enzyme inhibited the growth of fish pathogens such as Flavobacterium sp., Pseudomonas fluorescens, Vibrio harveyi, Proteus sp. and Vibrio parahaemolyticus. From the present study it can be concluded that Alcaligens faecalis AU01 has the potential for aquaculture as probiotic agent and other several applications.     

Fate of coliforms and pathogenic parasite in four full-scale sewage treatment systems in India

Global positioning systems (GPS) are increasingly being used for habitat mapping because they provide spatially referenced data that can be used to characterize habitat structure across the landscape and document habitat change over time. We evaluated the accuracy of using a GPS for determining the size and location of habitat patches in a riverine environment. We simulated error attributable to a mapping-grade GPS receiver capable of achieving sub-meter accuracy onto discrete macrophyte bed and wood habitat patches (2 to 177 m(2)) that were digitized from an aerial photograph of the Laramie River, Wyoming, USA in a way that emulated field mapping. Patches with simulated error were compared to the original digitized patches. The accuracy in measuring habitat patches was affected most by patch size and less by patch shape and complexity. Perimeter length was consistently overestimated but was less biased for large, elongate patches with complex shapes. Patch area was slightly overestimated for small patches but was unbiased for large patches. Precision of area estimates was highest for large (>100 m(2)), elongate patches. Percent spatial overlap, a measure of the spatial accuracy of patch location, was low and variable for the smallest patches (2 to 5 m(2)). Mean percent spatial overlap was not related to patch shape but the precision of overlap was lower for small, elongate, and complex patches. Mapping habitat patches with a mapping-grade GPS can yield useful data, but research objectives will determine the acceptable amount of error and the smallest habitats that can be reliably measured.     

Operational Evapotranspiration Mapping Using Remote Sensing and Weather Datasets: A New Parameterization for the SSEB Approach

The increasing availability of multi‐scale remotely sensed data and global weather datasets is allowing the estimation of evapotranspiration (ET) at multiple scales. We present a simple but robust method that uses remotely sensed thermal data and model‐assimilated weather fields to produce ET for the contiguous United States (CONUS) at monthly and seasonal time scales. The method is based on the Simplified Surface Energy Balance (SSEB) model, which is now parameterized for operational applications, renamed as SSEBop. The innovative aspect of the SSEBop is that it uses predefined boundary conditions that are unique to each pixel for the “hot” and “cold” reference conditions. The SSEBop model was used for computing ET for 12 years (2000‐2011) using the MODIS and Global Data Assimilation System (GDAS) data streams. SSEBop ET results compared reasonably well with monthly eddy covariance ET data explaining 64% of the observed variability across diverse ecosystems in the CONUS during 2005. Twelve annual ET anomalies (2000‐2011) depicted the spatial extent and severity of the commonly known drought years in the CONUS. More research is required to improve the representation of the predefined boundary conditions in complex terrain at small spatial scales. SSEBop model was found to be a promising approach to conduct water use studies in the CONUS, with a similar opportunity in other parts of the world. The approach can also be applied with other thermal sensors such as Landsat.     

Do the poor have what they need to adapt to climate change? A case study of Nepal

Nepal's geographical landscape of plains, hills, and mountains exposes it to severe climatic conditions. Out of the three regions, the plain, also called Terai, has the greatest risk of flooding, especially during the monsoon season when heavy precipitation coincides with snow and glacier melting from the mountains and hills. In recent years, greater water availability has increased the frequency of flooding, destroying farms, livestock, and infrastructure, hence, reducing agricultural productivity and disrupting economic activities. What makes Nepal a unique case study for climate change is its richness in water resources, propensity to flood, the percentage of poor people living in the flood prone region, and their dependency on natural resources. The lessons drawn can help when formulating pro-poor adaptation policies for other Asian and many developing countries that are as diverse, poor, and agrarian as Nepal. Using data collected through survey interviews, the study examines the ability of the poor to adapt to climate change. The study also explores the adaptive capacity of communities in the Koshi Tappu area, by examining whether or not they have the required capital assets (human, social, natural, physical, and financial capital) to remain resilient in the face of continuous climate events impacts.     

Removal of aqueous nickel (II) using laterite as a low-cost adsorbent.

The present paper describes the laboratory study of laterite as a low-cost adsorbent for removal of aqueous nickel (II). At pH 7 and a temperature of 30 degrees C, a sorbent dose of 15 mg/L resulted in approximately 90% removal of nickel (II) from its initial concentration of 10 mg/L. A maximum removal of 98% of the adsorbate was observed with an adsorbent particle size of 210 micro with the above conditions. Batch kinetics results were described by fitting in a Langmuir isotherm. Helffrich's half-time equation (Helffrich, 1962) has been applied to evaluate the adsorption process. It appears that film diffusion would be the rate-limiting step. The effect of pH on the sorption process was carried out to a value of 8.0. The removal rate of nickel was found to be the function of pH of the reaction mixture. The rate of nickel uptake by laterite with the decrease in pH value has been explained on the basis of aqueous-complex formation and the subsequent acid-base dissociation at the solid-solution interface.     

Biodegradability of PMMA Blends with Some Cellulose Derivatives

High polymer blends of Polymethyl methacrylate (PMMA) with cellulose acetate (CA) and Cellulose acetate phthalate (CAP) of varying blend compositions have been prepared to study their biodegradation behavior and blend miscibility. Films of PMMA–CA, and PMMA–CAP blends have been prepared by solution casting using Acetone and Dimethyl formamide(DMF) as solvents respectively. Biodegradability of these blends has been studied by four different methods namely, soil burial test, enzymatic degradation, and degradation in phosphate buffer and activated sludge degradation followed by water absorption tests to support the degradation studies. Degradation analysis was done by weight loss method. The results of all the tests showed sufficient biodegradability of these blends. Degradability increased with the increase in CA and CAP content in the blend compositions. The miscibility of PMMA–CA and PMMA–CAP blends have been studied by solution viscometric and ultrasonic methods. The results obtained reveal that PMMA forms miscible blends with either CA or CAP in the entire composition range. Miscibility of the blends may be due to the formation of hydrogen bond between the carbonyl group of PMMA and the free hydroxyl group of CA and CAP.