Occurrence and seasonal variation of bacterial indicators of faecal pollution along Thoothukudi Coast, Tamil Nadu

Theprevalence and seasonal variation of bacterial indicators of faecal pollution such as total coliform bacteria, faecal coliform bacteria, Escherichia coli and faecal streptococci were investigated in samples of water and beach sand from the four fish landing centres of Thoothukudi. Further the samples were screened for Salmonella to study the reliability of faecal indicator bacteria as an index of human pathogenic bacteria. Total coliform bacteria, faecal coliform bacteria and Escherichia coli were isolated from all four landing centres from undetectable to the maximum detectable level of over Most Probable Number 140 throughout the year with no obvious seasonal variation. Faecal streptococci were also detected in most samples. There was no discernable relationship between faecal indicators and physical parameters. The relationship between faecal indicators and Salmonella was not significant (p > 0.05). The results showed that the coastal waters along Thoothukudi is polluted and presents a potential risk to public for recreational and fishing activities.     

Metals concentration associated with respirable particulate matter (PM10) in industrial area of Eastern U.P. India

The present study deals with the assessment of ambient air quality with respect to respirable suspended particulate matter (RSPM or PM10 < or = 10 microm) and trace metals (Fe, Zn, Cu, Cr Ni, Cd, Mn and Pb) concentrations in RSPM at five locations of Renukoot, an industrial area of Eastern Uttar Pradesh. The 24 hr mean concentrations of PM10 ranged between 69.3 to 118.9 microg m(-3), which is well within the permissible limit (150 microg m(-3)) of national ambient air quality standards (NAAQS) but found higher than the prescribed annual daily limit of US EPA (50 microg m(-3)). The ambient air was mostly dominated by the Fe and least by the Cd among the metal analysed. Murdhawa, a commercial place influenced by vehicular population, is found to be the most polluted area of Renukoot and Dongia nalla (forest area) the least. The ambient air of Murdhawa is rich in Cu and Ni, indicating contribution of mobile sources. The Rammandir a residential place near the industry, is rich in Cd and Cr suggesting contribution of point sources. The Ni concentration is found to be alarmingly high in the air at all the locations except Dongia nallah, when compared with the EC (European Commission) limit (20 ng m(-3)). The Cd concentration is found to be higher only at Rammandir as compared with the EC limit (5 ng m(-3)). Mean concentrations of Zn, Pb and Mn are found to be almost equal in the ambient air of all the locations, suggesting the significance of sources contributing to presence of these metals. Zn, Cu, Pb and Ni having a significant correlation with PM10 indicate the same source contributing these metals as well as PM10. The present study has focused on the quantitative variation in different metals in the PM10, which is extremely harmful due to their toxic and carcinogenic nature.     

Sorption and bioavailability of arsenic in selected Bangladesh soils

The bioavailability of arsenic (As) in the soil environment is largely governed by its adsorption–desorption reactions with soil constituents. We have investigated the sorption–desorption behaviour of As in four typical Bangladeshi soils subjected to irrigation with As-contaminated groundwater. The total As content of soils (160 samples) from the Laksham district ranged from <0.03 to approximately 43 mg kg⁻¹. Despite the low total soil As content, the concentration of As in the pore water of soils freshly irrigated with As-contaminated groundwater ranged from 0.01 to 0.1 mg l⁻¹. However, when these soils were allowed to dry, the concentration of As released in the pore water decreased to undetectable levels. Remoistening of soils to field moisture over a 10-day period resulted in a significant (up to 0.06 mg l⁻¹) release of As in the pore water of soils containing >10 mg As kg⁻¹ soil, indicating the potential availability of As. In soils containing <5 mg As kg⁻¹, As was not detected in the pore water. A comparison of Bangladeshi soils with strongly weathered long-term As-contaminated soils from Queensland, Australia showed a much greater release of As in water extracts from the Australian soils. However, this was attributed to the much higher loading of As in these Australian soils. The correlation of pore water As with other inorganic ions (P, S) showed a strongly significant (P < 0.001) relationship with P, although there was no significant relationship between As and other inorganic cations, such as Fe and Mn. Batch sorption studies showed an appreciable capacity for both As^V and As^III sorption, with As^V being retained in much greater concentrations than As^III.     

The impact of sequestration on the bioaccessibility of arsenic in long-term contaminated soils

Arsenic (As) contamination of soil poses a potential threat to human health, particularly for small children, through the incidental ingestion of soil from hand-to-mouth activity. In this study, we examined the relationship between As bioaccessibility using the simplified bioaccessibility extraction test (SBET) and the soil fractions that contribute to bioaccessible As in 12 long-term contaminated soils. Sequential fractionation of soils prior to As bioaccessibility assessment found that As was primarily associated with the specifically sorbed (3-26%), amorphous and poorly crystalline (12-82%), and the well crystalline (3-25%) oxyhydroxide Fe/Al phases with proportions varying depending on the mode of As input. Arsenic bioaccessibility in these soils ranged from less than 1% in the gossan soil to 48% in railway corridor soils. Soil fractions contributing to As bioaccessibility were found to be from the non-specifically (<1-11%), the specifically (<1-29%) sorbed and the amorphous and poorly-crystalline (30-93%) oxyhydroxide Fe/Al fractions. Significant correlations (p<0.05) were found between the As bioaccessible fraction and the amorphous and poorly-crystalline oxyhydroxide Fe/Al fractions indicating that this fraction is a key factor influencing As bioaccessibility in many anthropogenically contaminated soils.     

Sorption of fenamiphos to different soils: the influence of soil properties

Fenamiphos (0-ethyl-0(3-methyl-4-methylthiophenyl)-isopropylamido-phosphate) is a widely used nematicide and insecticide in bowling greens and agriculture, but information on its sorption including its metabolites is limited. Hence, the sorption of fenamiphos (nematicide) and its major degradation products fenamiphos sulfoxide (FSO) and fenamiphos sulfone (FSO2) were determined in thirteen contrasting soils collected from Australia and Ecuador. The sorption coefficients (Kd) exhibited a wide range of variation from 2.48 to 14.94 L/Kg for fenamiphos; from 0 to 7.42 L/Kg for FSO and from 0 to 9.49 L/Kg for FSO2. The sorption affinity of the three compounds for all soils tested was as follows: fenamiphos > fenamiphos sulfone > fenamiphos sulfoxide. The results showed that the sorption of fenamiphos and its metabolites in some soils is very low, and in one case is nonexistant for the metabolites. This is of particular concern as due to its low sorption coefficient, the compound could easily migrate and contaminate water bodies. Fenamiphos and its oxidation products have been reported to be highly toxic to aquatic invertebrates and therefore, the information generated in this study assumes great importance in the risk assessment of fenamiphos and its metabolites in the environment.     

Human impacts on methane emission from mangrove ecosystems in India

This study deals with the emission of methane in relation to changing environmental conditions and human impact, in three mangrove ecosystems of south India. Time-varying fluxes of methane adopting the close chamber technique were used to estimate CH₄ emission from an unpolluted site (Pichavaram mangroves) and two polluted sites viz. (1) Ennore Creek mangroves (affected by fertilizer effluents and crude oil discharges) and (2) Adyar estuary mangroves (affected by the discharges of organic and industrial wastes), covering monthly and seasonal variations. The results indicate annual average CH₄ emissions of 7.4, 5.02 and 15.4 mg m⁻² h⁻¹ from the sediment–water interface of the Pichavaram, Ennore Creek and Adyar estuary respectively. Emission characteristics obtained at Pichavaram mangroves represent a natural variability with changing physico-chemical factors, whereas the emission characteristics at Ennore Creek and Adyar estuary mangroves show anthropogenic influence. Several environmental factors such as oxygen availability, organic matter, soil physical and chemical properties, in addition to human-mediated interventions have been identified as influencing emission rates in the mangrove ecosystems. Preliminary CH₄ emission estimates for the mangrove ecosystems along the Indian sub- continent and the tropical and subtropical coastline of the world by linear extrapolation based on surface area range from 0.05 to 0.37 and 2.8 to 19.25 Tg CH₄ year⁻¹ respectively. Our results also highlight the impact of human activities on future emission of methane from the mangrove ecosystems. Received: 3 March 1999 / Accepted: 14 September 1999     

Assessment of bioavailable nitrogen and phosphorus content in the sediments of Indian mangroves

Environmental Science and Pollution Research - Efficient nutrient cycling and adequate sediment bioavailable nutrient supply are considered to be the two most important factors regulating the high...     

Degradations of endocrine-disrupting chemicals and pharmaceutical compounds in wastewater with carbon-based nanomaterials: a critical review

Environmental Science and Pollution Research - Although water occupies 75% of the earth’s surface, only 0.0067% of the total water is available for human activities. These statistics further...     

Alternative Control Policies for Water Quality Management: An Experimental Economics Approach

Problems of deteriorating water quality and the prospects of large invest ments for treatment facilities have motivated government decision makers to seek more cost-effective means to manage water quality. The most preferred policy advocated by economists is based on economic incentives. But the response of water quality managers to a particular incentive system cannot be predicted a priori . Before any incentive system is implemented, its effectiveness must be evaluated. Mathematical programming models have been used for this purpose. Experimental economics provides an alternative mechanism for testing the effectiveness of such a system. It can also help identify the necessary parameters of incentive-based systems. The objective of this paper is to describe the results of an experiment for evaluating the effectiveness of managing water quality under two different policies: a command and control policy; and a transferable discharge permit (TDP) policy. A review of previous research on the effectiveness of TDP systems is provided along with arguments supporting the use of experimental economics to investigate these problems. The particular experiments developed for this research along with the experimental procedures are described. Key results and observations from the experiments are presented.     

Investigations of ash topography/morphology and their relationship with heavy metals leachability

The leachability of heavy metals such as chromium (Cr), lead (Pb) and cadmium (Cd) from the ash material obtained from waste combustion was studied. The effects of ash surface topography and morphology on the leachability of these elements were examined using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The AFM (scan size 10 x 10 microns) and SEM images of the simulated ash pellet obtained at various operating temperatures (1000, 1400 and 1500 degrees C) showed significant microstructural and topographical changes. Ash pellets treated at 1000 degrees C contain porous and non-continuous surface. On the other hand, the ash pellet obtained at higher temperature (1500 degrees C) was found to contain a smooth, continuous and non-porous surface. The AFM height profile studies indicated that the top surface variation of the ash pellet at 1000, 1400 and 1500 degrees C were found to be -40.0 to 25.5, -3.7 to 4.7 and -0.10 to 0.66 nm respectively. The SEM analyses also confirmed the presence of smooth, non-porous outer surface of ash formed at 1500 degrees C. In addition, it also showed the presence of compact and rigid interior for the same ash pellet. The leachability of the heavy metals was determined using standard toxicity characteristic leaching procedure (TCLP) test and the samples were analysed using atomic absorption spectroscopy. The results showed that the TCLP leaching ratios of the heavy metals were Cr = 0.30, Pb = 0.05 and Cd = 0.09 at 1000 degrees C. However, the ash obtained at 1400 degrees C showed negligible heavy metals leaching ratio while at 1500 degrees C no leachability was detected (TCLP concentration dropped to nondetectable levels). The use of high temperature treatment enabled the immobilization of heavy metals in the ash preventing their leaching. Such ash can be considered as a non-hazardous material for reuse or safe disposal.