Remediation of Persistent Organic Pollutants Using a Novel Two-Phase Soil Washing Biosorption Process

A two-phase soil washing biosorption process was developed for the remediation of p,p-DDT-contaminated soil. The process involved desorption of contaminants from soil using dilute primary alcohols (40% 1-propanol) followed by contaminant removal from cosolvent solutions using fungal biosorption. Bench scale remediation studies were preformed to simulate ex situ (recycling experiment) or in situ (soil column study) treatment strategies. Both systems were effective at cleaning the soil to below Australian regulatory p,p-DDT levels. After 50–80 hours of soil washing, over 93% of p,p-DDT was removed from the soil(990 mg kg^-1 to <65 mg kg^-1) using either of these methods.p,p-DDT was removed from the cosolvent phase by sorption onto the fungal biomass. This resulted in only low levels of p,p-DDT remaining in the cosolvent solution(<1.5 mg l^-1). The application of both treatment strategies resulted in the rapid clean up of p,p-DDT-contaminated soil and the potential to recycle cosolvent solutions. The ability to recycle cosolvent solutions provides a mechanism for cost reductions of the remediation strategy.     

Tensile,Flexural and Chemical Resistance Properties of Sisal Fibre Reinforced Polymer Composites: Effect of Fibre Surface Treatment

In this study, effect of fibre surface treatment on tensile, flexural and chemical resistance properties were studied for sisal fibre reinforced composites. Natural ligno cellulosic sisal fibre reinforced composites were prepared by different surface treatments by hand lay-up method. Fibre surface treatments were carried out to produce good interface between the fibre and the matrix to improve the mechanical properties. Fibre surface treatments were done by boiled the sisal fibres in different % of NaOH and treated the fibres in different % of NaOH, treated in acetic acid and methanol. Unsaturated polyester resin was used as the matrix for preparing the composites. For comparison, these properties for untreated sisal fibre reinforced composites were also studied. From the results it was observed that 18% aqueous NaOH boiled sisal fibre reinforced composites have higher tensile, flexural properties than other composites. Untreated sisal fibre composites show lower properties than treated composites. Chemical resistance properties indicate that all sisal fibre reinforced composites are resistance to all chemicals except carbon tetra chloride. The tests are carried out as per the ASTM standards.     

Toxicity of fenamiphos and its metabolites to the cladoceran Daphnia carinata: the influence of microbial degradation in natural waters

The acute toxicity of an organophosphorous pesticide, fenamiphos and its metabolites, fenamiphos sulfoxide, fenamiphos sulfone, fenamiphos phenol, fenamiphos sulfoxide phenol and fenamiphos sulfone phenol, to a cladoceran, Daphnia carinata was studied in both cladoceran culture medium and natural water collected from a local river. The toxicity followed the order: fenamiphos>fenamiphos sulfone>fenamiphos sulfoxide. The hydrolysis products of fenamiphos, F. sulfoxide (FSO) and F. sulfone (FSO(2)) (F. phenol, FSO phenol and FSO(2) phenol) were not toxic to D. carinata up to 500microgl(-1) water, suggesting hydrolysis reaction leads to detoxification. Also the toxicity was reduced in natural water compared to the cladoceran culture medium due to microbial mediated degradation of toxicants in the natural water. Fenamiphos and its metabolites were stable in both cladoceran water and filter-sterilised natural water while these compounds showed degradation in unfiltered natural water implicating the microbial role in degradation of these compounds. To our knowledge this is the first study on acute toxicity of fenamiphos metabolites to cladoceran and this study suggests that the organophosphate pesticides are highly toxic to fresh water invertebrates and therefore pollution with these compounds may adversely affect the natural ecosystems.     

Efficacy of biochar in removal of organic pesticide,Bentazone from watershed systems

Abstract

Bentazone is one of the toxic insecticides used to control forest tent caterpillar moths, boll weevils, gypsy moths, and other types of moths in various field crops. We report the efficacy of biochar prepared from the Azardirachta Indica waste biomass as adsorbent for removal of Bentazone. Biochar material was prepared by pyrolysis process under limited oxygen conditions. Biochar material was characterized by proximate and ultimate analysis, SEM analysis, FTIR analysis and TG/DTA analyses. The Bentazone adsorption capacity by biochar from aqueous solutions was assessed. Effect of time, adsorbent dosage, insecticide concentration and pH on the adsorption characteristics of the biochar were evaluated. Adsorption parameters were obtained at equilibrium contact time of 150?min, with biochar dosage of 0.5?g at pH 8. From the optimization studies, desirability of 0.952 was obtained with response (adsorption uptake) of 79.40?mg/g, for initial concentration of insecticide (50?mg/L), adsorbent dosage (0.448?g), time 30.0?min and pH 2. The adsorption isotherm data for the removal of Bentazone fitted well with the Freundlich isotherm. This study indicates that the biochar produced from the bark of Azardirachta Indica biomass could be employed as a potential adsorbent for removal of synthetic organic pollutants from the water streams.     

Chemistry of inorganic arsenic in soils: II. Effect of phosphorus, sodium, and calcium on arsenic sorption

There are more than 10000 arsenic (As) contaminated sites in Australia. The ability of soils at these contaminated sites to sorb As is highly variable and appreciable amounts of As have been recorded in the subsurface soils. The potential risk of surface and ground water contamination by As at these sites is a major environmental concern. Factors that influence adsorption capacity of soils influence the bioavailability and subsequent mobility of As in soils. In the present study we investigated the effect of PO4(3-) and Na+ and Ca2+ on the sorption of AsV and AsIII by an Oxisol, a Vertisol, and two Alfisols. The presence of P (0.16 mmol L(-1)) greatly decreased AsV sorption by soils containing low amounts of Fe oxides (<100 mmol kg(-1)), indicating competitive adsorption between P and AsV for sorption sites. In contrast, the presence of a similar amount of P had little effect on the amount of AsV adsorbed by soils with high Fe content (>800 mmol kg(-1)). However, AsV sorption substantially decreased from 0.63 to 0.37 mmol kg(-1) as P concentration was increased from 0.16 to 3.2 mmol L(-1) in selected soils. This suggests increased competition between P and AsV for soil sorption sites, through either the higher affinity or the effect of mass action of the increasing concentration of P in solution. A similar effect of P on AsIII sorption was observed in the low sorbing Alfisol and high affinity Oxisol. However, the amount of AsIII sorbed by the Oxisol was much greater than the Alfisol for all treatments. The presence of Ca2+ increased the amount of AsV sorbed compared with that of Na+ and was manifested through changes in the surface charge characteristics of the soils. A similar trend in AsIII sorption was recorded with changes in index cation, although the effect was not as marked as recorded for AsV.     

The determination of cobalt(II) at DME using catalytic hydrogen current technique in various water samples, agricultural materials and pharmaceuticals

Two novel and facile ligands ammonium piperidine dithiocarbamate (Amm Pip-DTC) and ammonium morpholine dithiocarbamate (Amm Mor-DTC) were synthesized for the development of rapid and cost effective catalytic hydrogen current technique to analyze cobalt(II) in the presence of NH(4)Cl-NH(4)OH at pH 7.8 and 8.4 with Amm Pip-DTC and Amm Mor-DTC. These ligands produce catalytic hydrogen currents with Co(II) at peak potentials -1.24 V and -1.44 V vs. SCE respectively. Quantitative experimental conditions are developed by studying effect of pH, supporting electrolyte (NH(4)Cl), ligand and metal ion concentrations and effect of adverse ions on peak height to improve the sensitivity, selectivity and detection limits of the catalytic hydrogen current technique and compared it in terms of Student's t test and variance ratio f test with differential pulse polarographic (DPP) method. The developed technique was applied for the analysis of cobalt(II) in various water samples, agricultural materials and pharmaceuticals and the results obtained are in good agreement with the DPP data.     

The use of molecular techniques to characterize the microbial communities in contaminated soil and water

Traditionally, the identification and characterization of microbial communities in contaminated soil and water has previously been limited to those microorganisms that are culturable. The application of molecular techniques to study microbial populations at contaminated sites without the need for culturing has led to the discovery of unique and previously unrecognized microorganisms as well as complex microbial diversity in contaminated soil and water which shows an exciting opportunity for bioremediation strategies. Nucleic acid extraction from contaminated sites and their subsequent amplification by polymerase chain reaction (PCR) has proved extremely useful in assessing the changes in microbial community structure by several microbial community profiling techniques. This review examines the current application of molecular techniques for the characterization of microbial communities in contaminated soil and water. Techniques that identify and quantify microbial population and catabolic genes involved in biodegradation are examined. In addition, methods that directly link microbial phylogeny to its ecological function at contaminated sites as well as high throughput methods for complex microbial community studies are discussed.     

Arsenic levels in rice grain and assessment of daily dietary intake of arsenic from rice in arsenic-contaminated regions of Bangladesh—implications to groundwater irrigation

Chronic exposure to arsenic (As) causes significant human health effects, including various cancers and skin disorders. Naturally elevated concentrations of As have been detected in the groundwater of Bangladesh. Dietary intake and drinking water are the major routes of As exposure for humans. The objectives of this study were to measure As concentrations in rice grain collected from households in As-affected villages of Bangladesh where groundwater is used for agricultural irrigation and to estimate the daily intake of As consumed by the villagers from rice. The median and mean total As contents in 214 rice grain samples were 131 and 143 μg/kg, respectively, with a range of 2–557 μg/kg (dry weight, dw). Arsenic concentrations in control rice samples imported from Pakistan and India and on sale in Australian supermarkets were significantly lower (p < 0.001) than in rice from contaminated areas. Daily dietary intake of As from rice was 56.4 μg for adults (males and females) while the total daily intake of As from rice and from drinking water was 888.4 and 706.4 μg for adult males and adult females, respectively. From our study, it appears that the villagers are consuming a significant amount of As from rice and drinking water. The results suggest that the communities in the villages studied are potentially at risk of suffering from arsenic-related diseases.     

Arsenic testing field kits: some considerations and recommendations

In recent years field test kits have been largely used to identify arsenic (As) levels in contaminated water sources in Bangladesh, West Bengal (India), and elsewhere in the world to establish whether or not the water is safe. Most of the kits are based on the reaction of arsine gas with some chemical agent to form a coloured complex; the intensity of the colour is compared visually with a colour-coded chart or measured electronically to calculate the concentration of As in the water sample. In this paper, a step-wise review is presented of the analytical process used in the most commonly available As field test kits and the associated shortcomings of each of these kits. We also identify the research gaps for future work to enhance the accuracy and reliability of test results produced by these kits.     

Environmentally safe release of plant available potassium and micronutrients from organically amended rock mineral powder

Environmental Geochemistry and Health - The staggering production of rock dusts and quarry by-products of mining activities poses an immense environmental burden that warrants research for...