POTENTIAL PHOSPHORUS LOAD REDUCTIONS UNDER THE LAKE OKEECHOBEE REGULATORY PROGRAM1

ABSTRACT: Nutrient loading from beef pastures located within the northern Lake Okeechobee watershed in Florida, has been identified as a source of phosphorus contributing to the accelerated eutrophication of the lake. Since 1989 within the watershed, 557 agricultural drainage sites, mainly beef pasture, have been monitored for compliance under a regulatory program. Of those sites, 154 were actively monitored for phosphorus concentrations from October 1, 1998, to September 30, 1999. Of these 154 sites, 77 were considered to be out of compliance (OOC). An OOC site is defined as having runoff with a 12‐month average phosphorus concentration exceeding the permitted discharge limit. The average annual phosphorous load from the 77 OOC sites for an eight‐year study period from October 1, 1991, to September 30, 1999, was estimated using measured concentration values and simulated runoff obtained from an agricultural nonpoint source pollution model, CREAMS‐WT. The 77 OOC sites produced an estimated average annual 46 metric tonnes of phosphorus load, of which an estimated 22 tonnes of phosphorus reached Lake Okeechobee on an average annual basis. The remaining estimated average annual 24 tonnes of phosphorus load was retained by streams and wetlands in the discharge transport system between the sites and the lake. The estimated average annual load reaching Lake Okeechobee from the OOC sites represented 11 percent of the phosphorus load above a five‐year average annual target load for the lake. However, the OOC site drainage areas represented only 3 percent of the northern watershed that drains into the lake. Of the 77 OOC sites, 12 sites had an average annual phosphorus loading rate equal to or greater than 3.0 kg/ha and were placed on the priority list for the Critical Restoration Project in the Lake Okeechobee watershed. To estimate the possible phosphorus load reductions from the 77 sites, two scenarios were modeled. The first scenario reduced phosphorus concentrations in runoff to the permitted discharge limits under the Lake Okeechobee regulatory program. The second scenario changed current land uses to native rangeland with an estimated annual offsite total phosphorus areal loading rate of 0.114 kg/ha. These two scenarios are hypothetical with assumed concentration values and loading rate. Model results showed that the first management scenario reduced the average annual phosphorus load to the lake by an estimated 15 tonnes. The second scenario reduced the average annual phosphorus load to the lake by an estimated 21 tonnes.     

Documenting lemming population change in the Arctic: Can we detect trends?

Lemmings are a key component of tundra food webs and changes in their dynamics can affect the whole ecosystem. We present a comprehensive overview of lemming monitoring and research activities, and assess recent trends in lemming abundance across the circumpolar Arctic. Since 2000, lemmings have been monitored at 49 sites of which 38 are still active. The sites were not evenly distributed with notably Russia and high Arctic Canada underrepresented. Abundance was monitored at all sites, but methods and levels of precision varied greatly. Other important attributes such as health, genetic diversity and potential drivers of population change, were often not monitored. There was no evidence that lemming populations were decreasing in general, although a negative trend was detected for low arctic populations sympatric with voles. To keep the pace of arctic change, we recommend maintaining long-term programmes while harmonizing methods, improving spatial coverage and integrating an ecosystem perspective.     

Mobility of dimethoate residues from spring broccoli field

Dimethoate [O, O-dimethyl-S-(N-methylcarbamoyl-methyl) phosphorodithioate] is a broad-spectrum systemic insecticide currently used worldwide and on many vegetables in Kentucky. Dimethoate is a hydrophilic compound (log K_OW = 0.7) and has the potential of offsite movement from the application site into runoff and infiltration water. The dissipation patterns of dimethoate residues were studied on spring broccoli leaves and heads under field conditions. Following foliar application of Dimethoate 4E on broccoli foliage at the rate of 0.47 L acre^?1, dimethoate residues were monitored in soil, runoff water collected down the land slope, and in infiltration water collected from the vadose zone. The study was conducted on a Lowell silty loam soil (pH 6.9) planted with broccoli under three soil management practices: (i) soil mixed with municipal sewage sludge, (ii) soil mixed with yard waste compost, and (iii) no-mulch rototilled bare soil. The main objective of this investigation was to study the effect of mixing native soil with municipal sewage sludge or yard waste compost, having considerable amounts of organic matter, on off-site movement of dimethoate residues into runoff and infiltration water following spring rainfall. The initial deposits of dimethoate were 6.2 and 21.4 μ g g^?1 on broccoli heads and leaves, respectively. These residues dissipated rapidly and fell below the maximum residue limit of 2 μ g g^?1 on the heads and leaves after 10 and 14 d, respectively, with half-lives of 5.7 d on broccoli heads and 3.9 d on the leaves. Dimethoate residues detected in top 15 cm of soil (due to droplet drift and wash off residues from broccoli foliage) one day (d) following spraying, were 30.5 ng g^?1 dry soil in the sewage sludge treatment, and 46.1 and 134.5 ng g^?1 dry soil in the yard waste and no mulch treatments, respectively. Water infiltration was greater from yard waste compost treatment than from no mulch treatment, however concentrations of dimethoate in the vadose zone of the three soil treatments did not differ.     

Effects of roof and rainwater characteristics on copper concentrations in roof runoff

Copper sheeting is a common roofing material used in many parts of the world. However, copper dissolved from roof sheeting represents a source of copper ions to watersheds. Researchers have studied and recently developed a simple and efficient model to predict copper runoff rates. Important input parameters include precipitation amount, rain pH, and roof angle. We hypothesized that the length of a roof also positively correlates with copper concentration (thus, runoff rates) on the basis that runoff concentrations should positively correlate with contact time between acidic rain and the copper sheet. In this study, a novel system was designed to test and model the effects of roof length (length of roof from crown to the drip edge) on runoff copper concentrations relative to rain pH and roof angle. The system consisted of a flat-bottom copper trough mounted on an apparatus that allowed run length and slope to be varied. Water of known chemistry was trickled down the trough at a constant rate and sampled at the bottom. Consistent with other studies, as pH of the synthetic rainwater decreased, runoff copper concentrations increased. At all pH values tested, these results indicated that run length was more important in explaining variability in copper concentrations than was the roof slope. The regression equation with log-transformed data (R ² = 0.873) accounted for slightly more variability than the equation with untransformed data (R ² = 0.834). In log-transformed data, roof angle was not significant in predicting copper concentrations.     

Macro kinetic studies for photocatalytic degradation of benzoic acid in immobilized systems

Semiconductor photocatalytic process has been studied extensively in recent years due to its intriguing advantages in environmental remediation. In this study, a two-phase swirl-flow monolithic-type reactor is used to study the kinetics of photocatalytic degradation of benzoic acid in immobilized systems. Transport contributions into the observed degradation rates were determined when catalyst is immobilized. Intrinsic kinetic rate constants and its dependence on light intensity and catalyst layer thickness, values of adsorption equilibrium constant, internal as well as external mass transfer parameters were determined. The simultaneous effect of catalyst loading and light intensity and optimum catalyst layer thickness were also determined experimentally. Reaction rate constants and overall observed degradation rates were compared with slurry systems.     

“EMPRESS”计划:通过改善管理实现持久地节约能源

联合国环境规划署(UNEP)和全球环境组织正在中欧和和东欧发起"EMPRESS”(有关能源管理和执行的节约计划)计划.这项计划集中了两个既定的提高能源效率的手段--能源服务机构(ESCOs)和监测与确定指标系统(M＆T)--,以便通过低成本手段以及改善管理方法减少二氧化碳的排放执行费用将由如此节约能源后产生的效益承担.     

Laboratory studies on the remediation of mercury contaminated soils

Mercury, in contrast to other toxic metals, cycles between the atmosphere, land, and water. During this cycle, it undergoes a series of complex chemical and physical transformations. Because of these transformations, it is found in the environment not only as simple inorganic and organic compounds, but also as complex compounds. As a result, it is difficult to remediate mercury contaminated materials. Laboratory studies were conducted with a mercury contaminated complex waste from an industrial site to evaluate the ability of extractants such as H₂O₂, H₂SO₄ and Na₂S₂O₃ to decontaminate the waste. Up to 87 percent of the total mercury present in the waste was extracted. Mercury was recovered as insoluble mercury sulfide by adding Na₂S solution to the combined filtrates from the H₂O₂ + H₂SO₄ and Na₂S₂O₃ treatment steps. The technique described in this article is capable of recovering mercury in a usable form and can be used as a pretreatment to remediate mercury contaminated waste before laud disposal.     

Solid substrate fermentation of cassava fibrous residue for production of alpha-amylase, lactic acid and ethanol

There is serious concern about the disposal of solid residues left after large scale extraction of starch from cassava. Owing to the high starch content (55-65% on dry weight basis) and organic matter of these wastes, an attempt has been made to utilize it for the production of three bioproducts, i.e. alpha-amylase, lactic acid and ethanol in solid substrate fermentation by incubating the solid residue at different moisture holding capacity (40-80%) and incubation period (12- 60 hr for alpha-amylase, 24-144 hr for ethanol and 2-10 days for lactic acid). The highest product yield was obtained at 60% moisture holding capacity of the residue and period of incubation varied from 36 hr (alpha-amylase), 120 hr (ethanol) to 6 days (lactic acid). This study showed that the solid residues from cassava starch factories could serve as a low-cost substrate for bioproducts production.