Emission,speciation, and evaluation of impacts of non-methane volatile organic compounds from open dump site

Surface emission from Dhapa, the only garbage disposal ground in Kolkata, is a matter of concern to the local environment and also fuels the issues of occupational and environmental health. Surface emission of the Dhapa landfill site was studied using a flux chamber measurement for nonmethane volatile organic compounds (NMVOCs). Eighteen noncarbonyl volatile organic compounds (VOCs) and 14 carbonyl VOCs, including suspected and known carcinogens, were found in appreciable concentrations. The concentrations of the target species in the flux chamber were found to be significantly higher for most of the species in summer than winter. Surface emission rate of landfill gas was estimated by using two different approaches to assess the applicability for an open landfill site. It was found that the emissions predicted using the model Land GEM version 3.02 is one to two orders less than the emission rate calculated from flux chamber measurement for the target species. Tropospheric ozone formation has a serious impact for NMVOC emission. The total ozone-forming potential (OFP) of the Dhapa dumping ground considering all target NMVOCs was estimated to be 4.9E+04 and 1.2E+05 g/day in winter and summer, respectively. Also, it was found that carbonyl VOCs play a more important role than noncarbonyl VOCs for tropospheric ozone formation. Cumulative cancer risk estimated for all the carcinogenic species was found to be 2792 for 1 million population, while the total noncancer hazard index (HI) was estimated to be 246 for the occupational exposure to different compounds from surface emission to the dump-site workers at Dhapa.

Implications:This paper describes the real-time surface emission of NMVOCs from an open municipal solid waste (MSW) dump site studied using a flux chamber. Our study findings indicate that while planning for new landfill site in tropical meteorology, real-time emission data must be considered, rather than relying on modeled data. The formation of tropospheric ozone from emitted NMVOC has also been studied. Our result shows how an open landfill site acts as a source and adds to the tropospheric ozone for the airshed of a metropolitan city.     

Evaluation of Dust Generated from Basic Oxygen Furnace Steel Making

Abstract

A detailed characterization has been made of the dust generated during steel making in basic oxygen furnaces (BOF). Chemical composition and particle size distribution have been analyzed. X-ray diffraction, scanning electron microscopy, and electron probe micro-analysis techniques have been used to identify the morphology and the nature of the major iron-bearing phases as well as the gangue constituents. The dust characteristics have been found to be widely different, depending on the type of process used in BOF steel making, namely, suppressed combustion or total combustion. The type of dust abatement system (dry or wet) additionally influences the nature of the gangue constituents. The possibility of utilizing the iron-bearing major phases has been examined.     

A Method of Predicting Point and Path- Averaged Ambient Air VOC Concentrations,Using Meteorological Data

A method of predicting point and path-averaged ambient air VOC concentrations is described. This method was developed for the case of a plume generated from a single point source, and is based on the relationship between wind directional frequency and concentration. One-minute means of wind direction and wind speed were used as inputs to a Gaussian dispersion model to develop this relationship.

Both FTIR spectrometry and a whole-air sampling method were used to monitor VOC plumes during simulated field tests. One test set was also conducted using only whole-air samplers deployed in a closely-spaced network, thus providing an evaluation of the prediction technique free of any bias that might exist between the two analytical methods.

Correlations between observed point concentrations and wind directional frequencies were significant at the 0.05 level in most cases. Predicted path-integrated concentrations, based on observed point concentrations and meteorological data, were strongly correlated with observed values. Predicted point concentrations, based on observed path-integrated concentrations and meteorological data, accurately reflected the location and magnitude of the highest concentrations from each test, as well as the shape of the concentration-versus-crosswind distance curve.     

Assessing the Potential for Salmon Recovery via Floodplain Restoration: A Multitrophic Level Comparison of Dredge-Mined to Reference Segments

Pre-restoration studies typically focus on physical habitat, rather than the food-base that supports aquatic species. However, both food and habitat are necessary to support the species that habitat restoration is frequently aimed at recovering. Here we evaluate if and how the productivity of the food-base that supports fish production is impaired in a dredge-mined floodplain within the Yankee Fork Salmon River (YFSR), Idaho (USA); a site where past restoration has occurred and where more has been proposed to help recover anadromous salmonids. Utilizing an ecosystem approach, we found that the dredged segment had comparable terrestrial leaf and invertebrate inputs, aquatic primary producer biomass, and production of aquatic invertebrates relative to five reference floodplains. Thus, the food-base in the dredged segment did not necessarily appear impaired. On the other hand, we observed that off-channel aquatic habitats were frequently important to productivity in reference floodplains, and the connection of these habitats in the dredged segment via previous restoration increased invertebrate productivity by 58%. However, using a simple bioenergetic model, we estimated that the invertebrate food-base was at least 4× larger than present demand for food by fish in dredged and reference segments. In the context of salmon recovery efforts, this observation questions whether additional food-base productivity provided by further habitat restoration would be warranted in the YFSR. Together, our findings highlight the importance of studies that assess the aquatic food-base, and emphasize the need for more robust ecosystem models that evaluate factors potentially limiting fish populations that are the target of restoration.     

Emerging technologies for removing nonpoint phosphorus from surface water and groundwater: introduction

Coastal and freshwater eutrophication continues to accelerate at sites around the world despite intense efforts to control agricultural P loss using traditional conservation and nutrient management strategies. To achieve required reductions in nonpoint P over the next decade, new tools will be needed to address P transfers from soils and applied P sources. Innovative remediation practices are being developed to remove nonpoint P sources from surface water and groundwater using P sorbing materials (PSMs) derived from natural, synthetic, and industrial sources. A wide array of technologies has been conceived, ranging from amendments that immobilize P in soils and manures to filters that remove P from agricultural drainage waters. This collection of papers summarizes theoretical modeling, laboratory, field, and economic assessments of P removal technologies. Modeling and laboratory studies demonstrate the importance of evaluating P removal technologies under controlled conditions before field deployment, and field studies highlight several challenges to P removal that may be unanticipated in the laboratory, including limited P retention by filters during storms, as well as clogging of filters due to sedimentation. Despite the potential of P removal technologies to improve water quality, gaps in our knowledge remain, and additional studies are needed to characterize the long-term performance of these technologies, as well as to more fully understand their costs and benefits in the context of whole-farm- and watershed-scale P management.     

Using flue gas desulfurization gypsum to remove dissolved phosphorus from agricultural drainage waters

High levels of accumulated phosphorus (P) in soils of the Delmarva Peninsula are a major source of dissolved P entering drainage ditches that empty into the Chesapeake Bay. The objective of this study was to design, construct, and monitor a within-ditch filter to remove dissolved P, thereby protecting receiving waters against P losses from upstream areas. In April 2007, 110 Mg of flue gas desulfurization (FGD) gypsum, a low-cost coal combustion product, was used as the reactive ingredient in a ditch filter. The ditch filter was monitored from 2007 to 2010, during which time 29 storm-induced flow events were characterized. For storm-induced flow, the event mean concentration efficiency for total dissolved P (TDP) removal for water passing through the gypsum bed was 73 ± 27% confidence interval (α = 0.05). The removal efficiency for storm-induced flow by the summation of load method was 65 ± 27% confidence interval (α = 0.05). Although chemically effective, the maximum observed hydraulic conductivity of FGD gypsum was 4 L s(-1), but it decreased over time to <1 L s(-1). When bypass flow and base flow were taken into consideration, the ditch filter removed approximately 22% of the TDP load over the 3.6-yr monitoring period. Due to maintenance and clean-out requirements, we conclude that ditch filtration using FGD gypsum is not practical at a farm scale. However, we propose an alternate design consisting of FGD gypsum-filled trenches parallel to the ditch to intercept and treat groundwater before it enters the ditch.     

Control of Asphaltic Concrete Plants in Los Angeles County

Characteristics of maximum short-term ground level concentrations from an elevated point source, namely, the effective plume height, the critical wind speed, the distance to the point of maximum concentration, and the maximum concentration, are derived from the gaussian plume model. Both phases of plume development—before and after it has reached its final height—are considered. The plume rise treatment includes both thermal buoyancy and momentum effects. Certain limitations on critical wind speed are discussed. The dispersion model whose basis is established in this paper should be especially useful in applications where on site meteorological data are unavailable.     

Use of Fenton's Reagent as a Disinfectant

Several compositions of Fenton's Reagent and hydrogen peroxide alone were used to disinfect combined sewage samples from a wastewater treatment facility. The presettled samples contained suspended solids (SS) and dissolved organic carbon (DOC) at concentrations of 28 and 290 mg/L, respectively. Disinfection with Fenton's Reagent was carried out at a pH between 5.90 and 6.0 and at a temperature of 25°C. All disinfected samples contained residual oxidants. Under all reaction conditions studied, complete inactivation of E. coli was achieved within one minute of the addition of Fenton's Reagent. Disinfection with hydrogen peroxide alone under similar conditions is incomplete even under much longer contact times. © 2009 Wiley Periodicals, Inc.     

Severity analysis of Indian coal mine accidents – A retrospective study for 100 years

A retrospective study on severity analysis of Indian coal mines accidents for 100 years was done considering fatal and serious accidents and the resulting causalities. The impact of recommendations based on safety conferences and committees over the years was studied. An event evaluation algorithm (EEA) was developed for this purpose. The hazard rate functions and cumulative risk functions for major hazards in Indian coal mines were developed. The study evaluated the status of safety level as well as the scope of improvement for Indian coal mines safety.     

Preparation of Economically Viable and Environment Friendly Composites from Effluents of Aleuritic Acid Industry

The synthesis of aleuritic acid from shellac is associated with generation of huge quantity of waste whose disposal leads to clogging of the sewage system and contaminates the water bodies into which the drain leads. The shellac waste, which was collected from the factory site and Jute fiber has been used to form a sustainable, eco-efficient and economical composite. Characterization of the resin and composite was done by FTIR, TG, DSC and SEM. Mechanical properties of the composites like tensile strength and impact strength etc. were measured.