Analysis of macroinvertebrate assemblages in relation to environmental gradients among lotic habitats of California's Central Valley

We assessed relationships between environmental characteristicsand macroinvertebrate assemblages in lotic habitats of California's Central Valley with community metric and multivariate statistical approaches. Using canonical ordinationanalyses, we contrasted results when assemblage structure was assessed with macroinvertebrate metrics, as suggested for use inindices of biotic integrity, or with genera abundances. Our objectives were to identify metrics or taxa diagnostic of loticenvironmental stressors and compare the capacity of theseapproaches to detect stressors in order to suggest how they mightbe used to diagnose stressors. For macroinvertebrate metrics,redundancy analysis (RDA) extracted three axes correlated withchannel morphology and substrates. For genera abundances, canonical correspondence analysis (CCA) extracted two axescorrelated with soluble salts and with channel morphology andsubstrates but did not separate these gradients onto differentaxes. Cluster analyses identified five RDA and five CCA sitegroups, which exhibited differences for environmental variables,metrics, or genera abundances, and agreement between the analysesin partitioning of sites was greater than if sites were partitioned randomly. These approaches differ in their abilityto detect environmental stressors, because they measure differentaspects of assemblages and would be complementary in design ofnew metrics diagnostic of stressors.     

Determination of total and available fractions of PAHs by SPME in oily wastewaters: overcoming interference from NAPL and NOM

Background, aim, and scope  

Polycyclic aromatic hydrocarbons (PAHs) are often found in oily wastewaters. Their presence is usually the result of human activities and has a negative effect on the environment. One important step in addressing this problem is to evaluate the effectiveness of PAH removal by biological processes since these are the most cost-effective treatments known today. Many techniques are presently available for PAH determination in wastewaters. Solid phase microextracion (SPME) is known to be one of the most effective techniques for this purpose. When analyzing complex matrices with substances such as natural organic matter (NOM) and non-aqueous phase liquids (NAPL), it is important to differentiate the free dissolved PAH from matrix-bonded PAH. PAHs associated with the bonded fraction are less susceptible to biological treatment. The present study concerns the development of a simple and suitable methodology for the determination of the freely dissolved and the total fraction of PAHs present in oily wastewaters. The methodology was then applied to an oily wastewater from a fuel station retention basin.     

Differences in resistance of three subtropical vegetation types to experimental trampling

Experimental trampling trials using a standardized methodology were undertaken in 10 replicate blocks in three vegetation types in an urban reserve in the subtropics of Australia. In each block different intensities of trampling (controls, 10, 25, 50, 100, 150, 200, 250, 300, 400 and 500 passes) were applied, and vegetation parameters were measured pre-trampling, immediately after trampling and 2 weeks later. A Fern understorey had low resistance to trampling intensity, with reductions in relative vegetation height and cover with as few as 10 passes. A Tussock grass understorey showed moderate resistance with reduction in height at 25 passes and cover at 50 passes. A Disturbed grassland dominated by lawn grasses had the highest resistance, with reductions in vegetation height at 100 passes, but cover was affected by as few as 10 passes. The resistance indices (number of passes required to reduce vegetation cover by 50%) of three vegetation types were 210, 360 and 860 passes, respectively. When these values were compared with those for 52 other vegetation types considerable variation was found within life forms, climatic zones and vegetation types indicating that the response of a specific community may not always be predictable.     

Indicating ecosystem integrity — theoretical concepts and environmental requirements

This paper discusses some conceptual fundamentals for the derivation of environmental indicator sets. On the one hand, it defines requirements from environmental politics, environmental management and legislation, reaching from political target hierarchies and sustainable management strategies to holistic protection concepts such as process protection, resource preservation, ecosystem health and ecological integrity. On the other hand, demands from ecosystem theory are described which include the consideration of features such as self-organization, emergence, thermodynamics, gradients and ecological orientors in environmental indicator sets. From that concept, collective and emergent properties are selected and eight holistic ecosystem features are presented that indicate the ecosystemic state as an ensemble. These general indicators of ecosystem integrity are supplemented by variables on structural changes and substance dynamics.     

The feeding behaviour of Schistocerca gregaria,the desert locust,on two starch mutants of Arabidopsis thaliana

Summary. Schistocerca gregaria, the desert locust, has been shown to regulate its dietary intake with respect to specific macronutrients in synthetic foods. This study examined the nutrients in the leaves of two starch mutants of Arabidopsis thaliana, and then compared the feeding behaviour of locusts on the two starch mutants. The high-starch mutant had c. 25 times more starch than the no-starch mutant. Newly molted 5th stadium locusts were preconditioned for 3 days on one of the mutants, and then observed for 90 min while exposed to the same or the alternative mutant. Locusts pretreated with the no-starch mutant fed longer during the first meal on high-starch mutants, spent more time feeding, and had the smaller latency to begin a meal when compared to the locusts pretreated on the high-starch mutant. The results of the study are interpreted in light of an integrative model of nutrient balancing. Received 16 November 1999; accepted 23 December 1999     

Remediation aspect of microbial changes of plant rhizosphere in mercury contaminated soil

Phytoremediation, an approach that uses plants to remediate contaminated soil through degradation, stabilization or accumulation, may provide an efficient solution to some mercury contamination problems. This paper presents growth chamber experiments that tested the ability of plant species to stabilize mercury in soil. Several indigenous herbaceous species and Salix viminalis were grown in soil collected from a mercury-contaminated site in southern Poland. The uptake and distribution of mercury by these plants were investigated, and the growth and vitality of the plants through a part of one vegetative cycle were assessed. The highest concentrations of mercury were found at the roots, but translocation to the aerial part also occurred. Most of the plant species tested displayed good growth on mercury contaminated soil and sustained a rich microbial population in the rhizosphere. The microbial populations of root-free soil and rhizosphere soil from all species were also examined. An inverse correlation between the number of sulfur amino acid decomposing bacteria and root mercury content was observed. These results indicate the potential for using some species of plants to treat mercury contaminated soil through stabilization rather than extraction. The present investigation proposes a practical cost-effective temporary solution for phytostabilization of soil with moderate mercury contamination as well as the basis for plant selection.     

A proposed impact assessment method for genetically modified plants (AS-GMP Method)

An essential step in the development of products based on biotechnology is an assessment of their potential economic impacts and safety, including an evaluation of the potential impact of transgenic crops and practices related to their cultivation on the environment and human or animal health. The purpose of this paper is to provide an assessment method to evaluate the impact of biotechnologies that uses quantifiable parameters and allows a comparative analysis between conventional technology and technologies using GMOs. This paper introduces a method to perform an impact analysis associated with the commercial release and use of genetically modified plants, the Assessment System GMP Method. The assessment is performed through indicators that are arranged according to their dimension criterion likewise: environmental, economic, social, capability and institutional approach. To perform an accurate evaluation of the GMP specific indicators related to genetic modification are grouped in common fields: genetic insert features, GM plant features, gene flow, food/feed field, introduction of the GMP, unexpected occurrences and specific indicators. The novelty is the possibility to include specific parameters to the biotechnology under assessment. In this case by case analysis the factors of moderation and the indexes are parameterized to perform an available assessment.     

Improved VOC bioremediation using a fluidized bed peat bioreactor

A gas–solid fluidized bed bioreactor was successfully used to treat air contaminated with a volatile organic compound (VOC). A bioreactor containing both a fluidized and packed bed of moist peat granules removed ethanol, a representative VOC, from an air stream. The fluidized bed operation mode of the bioreactor outperformed the packed bed mode. The maximum elimination capacity (EC) of ethanol in the fluidized mode was 1520 g m⁻³ h⁻¹, with removal efficiencies ranging between 45 and 100%, at loadings up to 3400 g m⁻³ h⁻¹. Maximum EC was 530 g m⁻³ h⁻¹ in the packed bed mode. Removal efficiency in the fluidized bioreactor was best at the lowest velocity, where the bubbling bed fluidization regime predominated. As gas velocity increased, the size and amount of large bubbles (slugs) increased and removal efficiency decreased while elimination capacity increased.     

Evaluation of various chemical extraction methods to estimate plant-available arsenic in mine soils

Elevated levels of bioavailable As in mining soils, agricultural areas and human habitats may cause potential toxicity to human health, plants and microbe. Therefore, it is essential to determine proper soil chemical extraction method in order to estimate plant-available As in mining soils and protect agricultural and environmental ecosystems by evaluation of environmental risk and implementation of remediation measures. In this study, six single soil chemical extraction processes and four-step sequential chemical extraction protocol were used to determine the relative distribution of As in different chemical forms of soils and their correlations with total As in plants grown in mining areas and greenhouse experiments. The strongest relationship between As determined by single soil chemical extraction and As in plant biomass was found for sodium acetate and mixed acid extractant. The mean percent of total As extracted was: ammonium oxalate (41%)>hydroxylamine hydrochloride (32%)>mixed acid (16%)>phosphate (6%)>sodium acetate (1.2%)>water (0.13%). This trend suggests that most of the As in these soils is inside the soil mineral matrix and can only be released when iron oxides and other minerals are dissolved by the stronger chemical extractant. Single soil chemical extraction methods using sodium acetate and mixed acids, that extract As fractions complexed to soil particles or on the surface of mineral matrix of hydrous oxides of Fe, Mn and Al (exchangeable+sorbed forms) can be employed to estimate and predict the bioavailable As fraction for plant uptake in mining affected soils. In sequential chemical extraction methods, ammonium nitrate and hydroxylamine hydrochloride may be used to provide closer estimates of plant-available As in mining soils.     

The sensitive and selective determination of aluminium by spectrofluorimetric detection after complexation with N-o-vanillidine-2-amino-p-cresol

A simple, easy to use and selective spectrofluorimetric method for the determination of trace levels of aluminium has been developed. A new Schiff base, N-o-vanillidine-2-amino-p-cresol (OVAC), has been synthesized and its fluorescence activity with aluminium investigated. Based on this chelation reaction, a spectrofluorimetric method has been developed for the determination of aluminium in samples buffered at pH 4.0 using acetic acid-sodium acetate. The chelation reaction between Al(iii) and N-o-vanillidine-2-amino-p-cresol was very fast, requiring only 20 min at room temperature to complex completely. The excitation and emission wavelengths were 423.0 and 553.0 nm, respectively, at which the OVAC-Al complex gave the maximum fluorescence intensity at pH 4.0 in a 50% ethanol-50% water medium. The interference from fluoride ions was minimized by the addition of Be(2+). Other ions were found not to interfere at the concentrations likely to be found in natural waters. Under these conditions, the calibration plot was linear up to 1000 microg L(-1) (r = 0.999). The limit of detection (3sigma) for the determination of Al(iii) was 0.19 microg L(-1) and the precision for multiple determinations of 3 ng mL(-1) Al(iii) prepared in ultra-pure water was found to be 0.29% (n = 16). The Schiff base ligand could be used to determine ultra-trace aluminium from natural waters. Analysis of environmental certified reference materials showed good agreement with the certified values. The procedure was found to be equally applicable to both fresh water and saline solutions (including sea water) using either normal external calibration or the standard additions method.