Warm forming die design,part I: Experimental validation of a novel thermal finite element modeling code

Finite element analysis (FEA) has become an invaluable tool in the design of sheet metal stamping dies and processes. FEA has gained widespread acceptance as the best method of optimizing dies for conventional stamping processes. More recently, FEA has been shown to be an effective method of designing tooling for sheet forming processes. In this work, an FEA based approach is applied to the warm stamping (warm forming) process. This work introduces a new thermal finite element analysis software called PASSAGE®/Forming (PASSAGE) that enables the up-front design of the thermal management of warm forming dies. This thermal finite element analysis software is designed to specifically handle the forming and optimization scenarios related to the heating of a stamping die while minimizing user interface time. In this work, PASSAGE has been applied to a simple block of steel embedded with cartridge heaters to validate the prediction capability of this software under two different heating conditions. The results show that PASSAGE is capable of predicting the actual steady-state temperature distribution within the block with an acceptable level of accuracy while yielding notable information to the user with respect to specifying power requirements. A finite element software package like PASSAGE is a valuable tool that will aid greatly in the implementation of warm forming as a manufacturing process beyond the scope of the laboratory and into production.     

Development of a biaxial loading frame for sheet metal

Characterization of the evolving yield loci and forming limit diagrams for sheet materials under biaxial loading is necessary for the development of accurate sheet metal forming process simulations. Biaxial tension testing has been shown to have significant advantages over the current computational and experimental methods for such material characterization; however, the few commercially available loading frames are far too large and expensive to be practical for most metal forming research laboratories. In this paper, the design of a practical servohydraulic biaxial loading frame is presented. The design, control, and operation of the loading frame are discussed in detail, and experimental data is provided to validate the effectiveness of the control system with respect to specimen center shifting.     

Individual consistency in exploratory behaviour and mating tactics in male guppies

While behavioural plasticity is considered an adaptation to fluctuating social and environmental conditions, many animals also display a high level of individual consistency in their behaviour over time or across contexts (generally termed ‘personality’). However, studies of animal personalities that include sexual behaviour, or functionally distinct but correlated traits, are relatively scarce. In this study, we tested for individual behavioural consistency in courtship and exploratory behaviour in male guppies (Poecilia reticulata) in two light environments (high vs. low light intensity). Based on previous work on guppies, we predicted that males would modify their behaviour from sneak mating tactics to courtship displays under low light conditions, but also that the rank orders of courtship effort would remain unchanged (i.e. highly sexually active individuals would display relatively high levels of courtship under both light regimes). We also tested for correlations between courtship and exploratory behaviour, predicting that males that had high display rates would also be more likely to approach a novel object. Although males showed significant consistency in their exploratory and mating behaviour over time (1 week), we found no evidence that these traits constituted a behavioural syndrome. Furthermore, in contrast to previous work, we found no overall effect of the light environment on any of the behaviours measured, although males responded to the treatment on an individual-level basis, as reflected by a significant individual-by-environment interaction. The future challenge is to investigate how individual consistency across different environmental contexts relates to male reproductive success.     

Incorporating Uncertainty into Management Models for Marine Mammals

Abstract: Good management models and good models for understanding biology differ in basic philosophy. Management models must facilitate management decisions despite large amounts of uncertainty about the managed populations. Such models must be based on parameters that can be estimated readily, must explicitly account for uncertainty, and should be simple to understand and implement. In contrast, biological models are designed to elucidate the workings of biology and should not be constrained by management concerns. We illustrate the need to incorporate uncertainty in management models by reviewing the inadequacy of using standard biological models to manage marine mammals in the United States. Past management was based on a simple model that, although it may have represented population dynamics adequately, failed as a management tool because the parameter that triggered management action was extremely difficult to estimate for the majority of populations. Uncertainty in parameter estimation resulted in few conservation actions. We describe a recently adopted management scheme that incorporates uncertainty and its resulting implementation. The approach used in this simple management scheme, which was tested by using simulation models, incorporates uncertainty and mandates monitoring abundance and human-caused mortality. Although the entire scheme may be suitable for application to some terrestrial and marine problems, two features are broadly applicable: the incorporation of uncertainty through simulations of management and the use of quantitative management criteria to translate verbal objectives into levels of acceptable risk.     

Green technology for sustainable surface protection of steel from corrosion: a review

Plants contain substances that inhibit corrosion. Here we review biomass-based corrosion inhibitors from plant leaves, nuts, and fruit peels, after treatment with acids, bases or saline solutions. The mechanism of corrosion inhibition involves a monolayer coverage, according to isotherm and Langmuir models. Plant extract-based corrosion inhibitors contain heteroatoms whose electrons pair in the p-electron level in multiple bonds and the vacant d-orbitals of iron. Corrosion inhibition under marine conditions involves various chemical interactions between metals and dissolved ionic components.

     

Assessment of urban air pollution and it's probable health impact

The present study deals with the quantitative effect of vehicular emission on ambient air quality during May 2006 in urban area of Lucknow city. In this study SPM, RSPM, SO2, NOx and 7 trace metals associated with RSPM were estimated at 10 representative locations in urban area and one village area for control. Beside this, air quality index (AQI), health effects of different metals and mortality were assessed. The 24 hr average concentration of SPM, RSPM, SO2 and NOx was found to be 382.3, 171.5, 24.3 and 33.8 microg m(-3) respectively in urban area and these concentrations were found to be significantly (p < 0.01) higher by 94.8, 134.8, 107.4 and 129.6% than control site respectively The 24 hr mean of SPM and RSPM at each location of urban area were found to be higher than prescribed limit of National Ambient Air Quality Standard (NAAQS) except SPM for industrial area. The 24 hr mean concentration of metals associated with RSPM was found to be higher than the control site by 52.3, 271.8, 408.9, 75.81, 62.7, 487.54 and 189.5% for Fe, Cu, Pb, Zn, Ni, Mn and Cr respectively. The inter correlation of metals Pb with Mn, Fe and Cr; Zn with Ni and Cr; Ni with Cr; Mn with Fe and Cu with Cr showed significant positive relation either at p < 0.05 or p < 0.01 level. Metals Pb, Mn and Cr (p < 0.01) and Cu (p < 0.05) showed significant positive correlation with RSPM. These results indicate that ambient air quality in the urban area is affected adversely due to emission and accumulation of SPM, RSPM, SO2, NOx and trace metals. These pollutants may pose detrimental effect on human health, as exposure of these are associated with cardiovascular and respiratory diseases, neurological impairments, increased risk of preterm birth and even mortality and morbidity.     

Effects of publication bias on conservation planning

Conservation planners need reliable information on spatial patterns of biodiversity. However, existing data sets are skewed because some ecosystems, taxa, and locations are underrepresented. We determined how many articles have been published in recent decades on the biodiversity of different countries and their constituent provinces. We searched the Web of Science catalogues Science Citation Index (SCI) and Social Science Citation Index (SSCI) for biodiversity-related articles published from 1993 to 2016 that included country and province names. We combined data on research publication frequency with other provincial-scale factors hypothesized to affect the likelihood of research activity (i.e., economic development, human presence, infrastructure, and remoteness). Areas that appeared understudied relative to the biodiversity expected based on site climate likely have been inaccessible to researchers for reasons, notably armed conflict. Geographic publication bias is of most concern in the most remote areas of sub-Saharan Africa and South America. Our provincial-scale model may help compensate for publication biases in conservation planning by revealing the spatial extent of research needs and the low cost of redoing this analysis annually.     

New aspect in seagrass acclimation: leaf mechanical properties vary spatially and seasonally in the temperate species Cymodocea nodosa Ucria (Ascherson)

Seagrasses may acclimate to environmental heterogeneity through phenotypic plasticity. In contrast to leaf morphology, which has been a central point in seagrass acclimation studies, plasticity in leaf biomechanics and fibre content is poorly understood, despite being crucial in plant ecological performance, especially regarding physical forces. We hypothesised that mechanical traits (e.g. breaking force, strength, toughness, and stiffness) and fibre content of seagrass leaves vary as morphology does under differential environments. Cymodocea nodosa was seasonally monitored at three locations around Cádiz Bay (southern Spain) with hydrodynamic regime as the most noticeable difference between them. Leaves showed plasticity in both morphology and mechanical traits, with wave-exposed individuals presenting short but extensible and tough leaves. Leaf fibre content was invariant along the year and with little spatial variability. Cross-sectional area rather than material properties or fibre content differentiates leaf mechanical resistance. Seagrass capacity to thrive under a range of mechanical forces may be dictated by their plasticity in morpho-biomechanical traits, a key element for the hydrodynamical performance and, hence, for species colonisation and distribution.     

Effect of surfactants on Fenton's reagent-mediated degradation of Kraft black liquor

One of the limitations of the biodegradation of hydrophobic chemical compounds, like lignins, is their low solubility in the aqueous solution where this process takes place. To resolve this problem, surfactants have been used to improve the solubility of these hydrophobic compounds. In this investigation, we studied the effect of surfactants (anionic, cationic, and non-ionic) on the treatment of Kraft black liquor with Fenton's reagent. In the Fenton reaction, H2O2 (two different concentrations, 10 mM and 20 mM), FeCl2 (1 mM) and surfactant solution (10%) were used. Black liquor degradation was determined by UV/Visible spectrophotometry and by measuring phenolic groups. In the presence of Fenton's reagent, the optimum conditions for the oxidative degradation of black liquor were 10 mM H2O2, 1 microL of 10% solution of anionic surfactant (SDS). The importance of the use of surfactants for preparing black liquor for subsequent Fenton's reagent-mediated degradation was discussed.