Runoff and drainage losses of atrazine, metribuzin, and metolachlor in three water management systems

Rainfall can transport herbicides from agricultural land to surface waters, where they become an environmental concern. Tile drainage can benefit crop production by removing excess soil water but tile drainage may also aggravate herbicide and nutrient movement into surface waters. Water management of tile drains after planting may reduce tile drainage and thereby reduce herbicide losses to surface water. To test this hypothesis we calculated the loss of three herbicides from a field with three water management systems: free drainage (D), controlled drainage (CD), and controlled drainage with subsurface irrigation (CDS). The effect of water management systems on the dissipation of atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine), metribuzin [4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazine-5(4H)-one), and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl)acetamide] in soil was also monitored. Less herbicide was lost by surface runoff from the D and CD treatments than from CDS. The CDS treatment increased surface runoff, which transported more herbicide than that from D or CD treatments. In one year, the time for metribuzin residue to dissipate to half its initial value was shorter for CDS (33 d) than for D (43 d) and CD (46 d). The half-life of atrazine and metolachlor were not affected by water management. Controlled drainage with subsurface irrigation may increase herbicide loss through increased surface runoff when excessive rain is received soon after herbicide application. However, increasing soil water content in CDS may decrease herbicide persistence, resulting in less residual herbicide available for aqueous transport.     

The GANE Roof Project: The impact of reduced N & S deposition and experimental warming in an acid grassland

A field-based system used to quantify the response of acid grassland to reduced atmospheric nitrogen and sulphur deposition, and to investigate the effects of elevated soil temperature on acid grassland development is described. The system is based on 12 retractable roofs, covering undisturbed experimental plots of acid grassland and three controls. Nine roofs are used to exclude natural precipitation and three roofs used to retain emitted IR radiation at night. An irrigation system has been developed to simulate natural precipitation, allowing for the application of specific treatment regimes of ambient, reduced nitrogen and reduced nitrogen/sulphur deposition beneath the nine rain exclusion plots. Plant, soil parameters, leachate chemistry and gaseous fluxes are being monitored and initial results on soil water chemistry are described. Warming appeared to enhance nitrate concentrations in soil water but this was not sustained beyond the first year of treatment. In contrast, the deposition reduction treatments decreased soil water nitrate concentrations within a few weeks of reducing deposition. This was not observed for other solutes such as sulphate or ammonium suggesting a more direct link between deposition of nitrate and leaching losses.     

RDX loss in a surface soil under saturated and well drained conditions

On military training ranges, low-order, incomplete detonations deposit RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) into surface soils. In this study, we evaluated RDX biodegradation in surface soils obtained from a military training range in Alaska. Two factors were compared: (i) soil water potential during the incubations; and (ii) the use of acetonitrile (ACN) as an RDX carrier to spike samples. Organic solvents have been used in laboratory studies to dissolve slightly water-soluble contaminants before addition to soil. We added ACN to obtain final soil ACN concentrations of 0 mg kg(-1) (0%), 1000 mg kg(-1) (0.1%) and 10 000 mg kg(-1) (1%). We then compared RDX attenuation in the soil under saturated and unsaturated conditions. RDX fell below the limit of detection within 3 wk of study initiation under the saturated condition. A maximum degradation rate of 0.15 mg RDX L(-1) d(-1) was measured. Under the unsaturated condition, 42% of the original RDX was still present at study termination (5 wk). The addition of acetonitrile at 0.1 or 1.0% had no affect on RDX loss in the saturated soil. In the unsaturated soil, however, ACN at 1.0% inhibited RDX loss by as much as 25%. These findings indicate that soil water potential and carrier solvent concentrations can impact the rate and extent to which RDX is attenuated in a surface soil.     

Information technology

Summary This paper describes some of today's important information handling products and attempts to predict tomorrows devices in the light of convergence and greater flexibility offered through the use of microchip technology.The main contention of this paper is that Information Technology and its impact on privacy depends, as ever, on the way in which Information Systems are used. It is argued that the privacy issue is more to do with moral and physiological attitudes within society than the technicalities of implementation.As a conclusion, the paper asks that we should define standards and exercise vigilance in the maintenance of those standards. In addition, it recognises that attitudes to privacy will almost certainly change with time and that this should be regarded as a healthy and natural occurrence.Roger Reynolds has worked in the computer industry for 18 years and has experience in both hardware design and systems development. He has been employed in ICL for the last 5 years and has been deeply involved with the development of communications and Information Technology within this company.Previously he worked on a project designed to integrate various activities in the health service. This involved the development of computer based systems connected together by telecommunications.This article represents a personal view by Mr Reynolds and it is hoped that it will stimulate further thought and understanding in the development of future technologies.     

Comparison of Multiple Passage Integrated Cell Culture-PCR and Cytopathogenic Effects in Cell Culture for the Assessment of Poliovirus Survival in Water

The goal of this study was to determine if a cytopathogenic effects (CPE) cell culture assay and an integrated cell culture PCR (ICC-PCR) assay would yield similar or different results when used to assess virus survival in water. Poliovirus type 1 was added to dechlorinated tapwater and stored at room temperature (22.5–24°C) for a total of 50 days. Samples were assayed at defined time intervals by the most probable number (MPN) method on Buffalo green monkey kidney cells (BGM) by CPE and additionally by ICC-PCR. Monolayers that were CPE negative on first passage were passed onto fresh monolayers of cells for a second and third time if still negative. By CPE assay, second passage was observed to yield a greater titer (2,300 vs. 24,000 MPN/ml) and third passage also resulted in an increased titer. ICC-PCR proved to be a more rapid and sensitive method than conventional cell culture for determining virus inactivation rates in water. Poliovirus survived in tapwater for up to 32 days, as assessed by both third passage ICC-PCR and CPE. There was no statistical difference in the inactivation rates between the two methods. To determine the total number of infectious viruses, these findings indicate the need for performing three cell culture passages or, alternatively, ICC-PCR on first passage.     

Effects of increased deposition of atmospheric nitrogen on an upland moor: nitrogen budgets and nutrient accumulation

This study was designed to investigate the effect of long-term (11 years) ammonium nitrate additions on standing mass, nutrient content (% and kg ha(-1)), and the proportion of the added N retained within the different compartments of the system. The results showed that more than 90% of all N in the system was found in the soil, particularly in the organic (Oh) horizon. Added N increased the standing mass of vegetation and litter and the N content (kg N ha(-1)) of almost all measured plant, litter and soil compartments. Green tissue P and K content (kg ha(-1)) were increased, and N:P ratios were increased to levels indicative of P limitation. At the lowest treatment, most of the additional N was found in plant/litter compartments, but at higher treatments, there were steep increases in the amount of additional N in the underlying organic and mineral (Eag) horizons. The budget revealed that the proportion of added N found in the system as a whole increased from 60%, 80% and up to 90% in response to the 40, 80 and 120 kg N ha(-1) year(-1) treatments, respectively.     

Air quality modeling and decisions for ozone reduction strategies

Despite the widespread application of photochemical air quality models (AQMs) in U.S. state implementation planning (SIP) for attainment of the ambient ozone standard, documentation for the reliability of projections has remained highly subjective. An "idealized" evaluation framework is proposed that provides a means for assessing reliability. Applied to 18 cases of regulatory modeling in the early 1990s in North America, a comparative review of these applications is reported. The intercomparisons suggest that more than two thirds of these AQM applications suffered from having inadequate air quality and meteorological databases. Emissions representations often were unreliable; uncertainties were too high. More than two thirds of the performance evaluation efforts were judged to be substandard compared with idealized goals. Meteorological conditions chosen according regulatory guidelines were limited to one or two cases and tended to be similar, thus limiting the extent to which public policy makers could be confident that the emission controls adopted would yield attainment for a broad range of adverse atmospheric conditions. More than half of the studies reviewed did not give sufficient attention to addressing the potential for compensating errors. Corroborative analyses were conducted in only one of the 18 studies reviewed. Insufficient attention was given to the estimation of model and/or input database errors, uncertainties, or variability in all of the cases examined. However, recent SIP and policy-related regional modeling provides evidence of substantial improvements in the underlying science and available modeling systems used for regulatory decision making. Nevertheless, the availability of suitable databases to support increasingly sophisticated modeling continues to be a concern for many locations. Thus, AQM results may still be subject to significant uncertainties. The evaluative process used here provides a framework for modelers and public policy makers to assess the adequacy of contemporary and future modeling work.     

Estimating industrial solid waste and municipal solid waste data at high resolution using economic accounts: an input–output approach with Australian case study

In publicly available waste reports only the totals of waste produced for municipal, or industry waste typically feature. The types of waste generated and the generating industry sector are usually omitted. We propose the direct inputs waste estimation methodology to create a detailed estimate of municipal solid waste and industrial solid waste for an economy (including sectoral and waste type disaggregation) using a top-down estimation methodology that links the aforementioned limited publicly available waste data with an input–output table’s direct inputs (A) matrix. We then provide an application of the direct inputs waste estimation methodology upon the 2008 waste generation of Australia resulting in a 344 industry sector and 14 waste type data set. The resulting estimation gives unique insights into Australian waste generation; including the large C&I tonnages of waste estimated to be produced from the Service sectors such as the Education, Hospitality, and Health sectors as well as the large amount of food waste produced throughout the economy.     

Perturbations alter community convergence, divergence, and formation of multiple community states

Environmental perturbations (e.g., disturbance, fertilization) commonly shift communities to a new mean state, but much less is known about their effects on the variability (dispersion) of communities around the mean, particularly when perturbations are combined. Community dispersion may increase or decrease (representing a divergence or convergence among communities) if changing environmental conditions alter species interactions or magnify small initial differences that develop during community assembly. We used data from an experimental study of disturbance and fertilization in a low-productivity grassland to test how these two perturbations affect patterns of species composition and abundance. We found that a one-time biomass reduction decreased community dispersion, which persisted over four growing seasons. Conversely, continuous fertilization increased community dispersion and, when combined with disturbance, led to the formation of three distinct community states. These results illustrate that perturbations can have differing effects on community dispersion. Attention to the variance in community responses to perturbations lends insight into how ecological interactions determine community structure, which may be missed when focusing only on mean responses. Furthermore, multiple perturbations may have complex effects on community dispersion, yielding convergence or divergence patterns that are difficult to predict based on analysis of single factors.