Characterization of ionic composition of TSP and PM10 during the Middle Eastern Dust (MED) storms in Ahvaz, Iran

Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ～10?μm or less (PM(10)) during dust storms in Ahvaz in April-September 2010. TSP and PM(10) samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM(10) were 1,481.5 and 1,072.9?μg/m(3), respectively. Particle concentrations during the Middle Eastern Dust (MED) days were up to four times higher than those in normal days. Ionic components contributed to only 9.5% and 11.3% of the total mass of TSP and PM(10), respectively. Crustal ions were most abundant during dust days, while secondary ions were dominant during non-dust days. Ca(2+)/Na(+) and Cl(-)/Na(+) ratios can be considered as the indicators for identification of the MED occurrence. It was found that possible chemical forms of NaCl, (NH(4))(2)SO(4), KCl, K(2)SO(4), CaCl(2), Ca(NO(3))(2), and CaSO(4) may exist in TSP. Correlation between the anionic and cationic components suggests slight anion and cation deficiencies in TSP and PM(10) samples, though the deficiencies were negligible.     

Reuse of municipal effluent with drip irrigation and evaluation the effect on soil properties in a semi-arid area

Irrigation with municipal effluent was evaluated during 25 months in Southern Iran from 2003 to 2005 in which 14 tree species were irrigated with effluent and borehole water at an annual supply rate of 3,940 and 5,395 m(3) ha(-1), respectively. To mitigate the environmental effects, a drip irrigation system was designed and the amount of applied water based on pan evaporation was measured by flow meters and soil properties were monitored. The statistical results showed that the applied effluent had no adverse effect on soil properties. The soil salinity was reduced from 8.2, 6.8 and 7.0 dSm(-1) to 1.07, 1.12 and 3.5 dSm(-1 )in the soil layers 0-30, 30-60 and 60-90 cm, respectively. The SAR decreased significantly, while soil pH increased by 0.8 and 0.6 units in the layers 0-30 and 30-60 cm. A total application of 9,335 m(3)ha(-1 )of effluent with a nitrogen and phosphorus concentration of 7.9 and 10.3 mg l(-1), added 73 and 101 kg ha(-1) of nitrogen and phosphorus to the soil. Organic carbon also increased significantly. Twenty-five months irrigation with effluent caused a slight increase in soil bulk density and a slight decrease in mean permeability. Because of an efficient filtration and high discharge rate of bubblers (drippers), no considerable sign of clogging was observed.     

Foliar application of aspartic acid lowers cadmium uptake and Cd-induced oxidative stress in rice under Cd stress

Environmental Science and Pollution Research - Cadmium (Cd) contamination of farmland soils is a widespread problem around the globe, and rice (Oryza sativa L.) tends to accumulate more Cd and is...     

Trade,FDI, and CO2 emissions nexus in Latin America: the spatial analysis in testing the pollution haven and the EKC hypotheses

Environmental Science and Pollution Research - Americas have a mix of developing and developed economies. Thus, the pollution haven hypothesis (PHH) is expected in the developing countries of Latin...     

Mercury chloride toxicity in human erythrocytes: enhanced generation of ROS and RNS,hemoglobin oxidation,impaired antioxidant power,and inhibition of plasma membrane redox system

Environmental Science and Pollution Research - Mercury is among the most toxic heavy metals and a widespread environmental pollutant. Mercury chloride (HgCl2) is an inorganic compound of mercury...     

A comparative decision-making model for sustainable end-of-life vehicle management alternative selection using AHP and extent analysis method on fuzzy AHP

Environmental protection and sustainable development are getting increasing attention in the automobile industries. Environmental consciousness has increased, and sustainability has become an important requirement for the management of end-of-life vehicles (ELVs). The proper management of ELVs can bring improved sustainability performance for any society or organisation. There are several alternative options for ELVs management such as reuse, repair, reconditioning, remanufacturing and recycling. Environmental legislation is forcing original equipment manufacturers (OEMs) to manage their products at the end of their life cycle to reduce their potential environmental impact. An appropriate selection model for sustainable ELV management alternatives in the dynamic, competitive and regulatory environment can enable a firm to satisfy economic, environmental, social and technological requirements. This study proposes an integrated model to select the dimensions and criteria for evaluating sustainable alternatives for the proper management of ELVs. First, the Decision-Making Trial and Evaluation Laboratory (DEMATEL) method is used to select the most important dimensions and criteria for sustainable alternative selection. Next, a hierarchy has been constructed to develop a systematic technique to solve the alternatives selection problem. An analytic hierarchy process (AHP) and extent analysis method on the fuzzy AHP (FEAHP) model have been used based on the hierarchy to evaluate the most suitable alternatives from the sustainability point of view. The strength of the proposed model is that it compares the results of both methods, the imprecision of experts’ opinions is considered in the evaluation process and the model is easy to use.     

EQUIVALENCE BETWEEN TOPMODEL AND THE NRCS CURVE NUMBER METHOD IN PREDICTING VARIABLE RUNOFF SOURCE AREAS1

An equivalence is proposed between two rainfall‐runoff methods with a long history of use in the United States and Europe. In watersheds where variable source areas dominate runoff, the two methods can have comparable probability distribution functions of moisture deficit, and therefore predict similar saturated runoff source areas. A novel approach is introduced to determine the S parameter in the Natural Resources Conservation Service (NRCS) method. This approach constrains S by the physical soil and topography characteristics of the catchment and depth to water table. The NRCS curve number method is at the core of many rainfall‐runoff models in hydrology. As a simple lumped parameter method, it is often scrutinized because it is not obvious how to derive S from catchment hydromorphological characteristics. The novel approach provides a clear physical meaning for S, allowing better estimation of this parameter in humid shallow water table environments where the variable source area can be the dominant runoff mechanism.     

Health risk assessment and oxidative stress in workers exposed to welding fumes

The aim of this study was designed to determine the influence of welding fumes on oxidative stress in humans and the role of metals. A questionnaire was designed to collect information regarding personal characteristics, including age, weight, height, and medical history; life style such as smoking status and exercise habits; and occupational history such as working history, working environment, employment duration, and use of protective equipment. Body mass index (BMI) in kg/m² was then calculated for each participant. Blood samples were also drawn to determine malondialdehyde (MDA) levels and various metals in plasma. Significantly higher plasma MDA (4.08 µg/L) was observed as compared to controls (1.61 µg/L). Blood metal analysis also showed elevated level of metals in welders for cadmium, chromium, lead,and nickel. Data indicated that workers occupationally exposed to welding fumes for prolong periods possessed higher metal levels associated with increased oxidative stress as evidenced by elevated MDA levels.     

Alteration of body total antioxidant capacity and thiol molecules in human chronic exposure to aluminum

The physiological role of aluminum (Al) is not yet known. Exposure to Al may cause many human disorders. The aim of this study was to explore how occupational human exposure to Al might affect the body oxidative stress. The relation between Al toxicity and oxidative stress was studied in blood samples obtained from 45 primary Al production workers, with a minimum work history of three years in the age range of 29–52 years. They were evaluated for oxidative stress biomarkers including thiobarbituric acid reactive substances (TBARS) indicator of lipid peroxidation, ferric reducing ability of plasma (FRAP) indicator of total antioxidant capacity, total thiol molecules and Al level in blood. The results showed that workers have significantly higher blood Al levels and concomitant lower blood FRAP and total thiol molecules in comparison to controls. Smokers had lower total thiol molecules than non-smokers. The subjects who had a previous history of disease had lower FRAP levels. It is concluded that Al induces oxidative stress in primary Al production workers. Supplementation of workers with antioxidants may have beneficial effects.