Comparative assessment of Azolla pinnata and Vallisneria spiralis in Hg removal from G.B. Pant Sagar of Singrauli Industrial region, India

The aim of the present work was to monitor the Hg pollution in water and sediments of G.B. Pant Sagar located in Singrauli Industrial Region, India and to suggest the efficient aquatic plants for its phytoremediation. The study assessed the comparative potential of a free floating water fern Azolla pinnata and submerged aquatic macrophyte Vallisneria spiralis to purify waters polluted by Hg. Six days laboratory experiments have been conducted to mark the percentage removal of Hg at initial concentration of 0.1, 0.5, 1.0 and 3.0 mg L(-1). The percentage removal of Hg was higher for A. pinnata (80-94%) than V. spiralis (70-84%). Likewise, the Hg accumulated in dry mass was much higher for A. pinnata and a high correlation (R(2) = 0.91 for A. pinnata and 0.99 for V. spiralis) was obtained between applied Hg doses and accumulated amounts in biomass. A concentration dependent decrease in chlorophyll a, protein, RNA, DNA and nutrients (NO(3-) and PO(4)(3-)) uptake was detected in A. pinnata and V. spiralis due to Hg toxicity. The decrease was more prominent in Azolla than Vallisneria. The results recommended the use of A. pinnata and V. spiralis to ameliorate the industrial effluents (thermal power, chlor-alkali and coal mine effluent) contaminated with Hg.     

Decadal emission estimates of carbon dioxide,sulfur dioxide,and nitric oxide emissions from coal burning in electric power generation plants in India

This study aims to estimate the emissions of carbon dioxide (CO₂), sulfur dioxide (SO₂), and nitric oxide (NO) for coal combustion in thermal power plants in India using plant-specific emission factors during the period of 2001/02 to 2009/10. The mass emission factors have been theoretically calculated using the basic principles of combustion under representative prevailing operating conditions in the plants and fuel composition. The results show that from 2001/02 to 2009/10 period, total CO₂ emissions have increased from 324 to 499 Mt/year; SO₂ emissions have increased from 2,519 to 3,840 kt/year; and NO emissions have increased from 948 to 1,539 kt/year from the Indian coal-fired power plants. National average emissions per unit of electricity from the power plants do not show a noticeable improvement during this period. Emission efficiencies for new plants that use improved technology are found to be better than those of old plants. As per these estimates, the national average of CO₂ emissions per unit of electricity varies between 0.91 and 0.95 kg/kWh while SO₂ and NO emissions vary in the range of 6.9 to 7.3 and 2.8 to 2.9 g/kWh, respectively. Yamunagar plant in Haryana state showed the highest emission efficiencies with CO₂ emissions as 0.58 kg/kWh, SO₂ emissions as 3.87 g/kWh, and NO emissions as 1.78 g/kWh, while the Faridabad plant has the lowest emission efficiencies with CO₂ emissions as 1.5 kg/kWh, SO₂ emissions as 10.56 g/kWh, and NO emissions as 4.85 g/kWh. Emission values at other plants vary between the values of these two plants.     

Monitoring of toxic elements present in sludge of industrial waste using CF-LIBS

Industrial waste is one of the main causes of environmental pollution. Laser-induced breakdown spectroscopy (LIBS) was applied to detect the toxic metals in the sludge of industrial waste water. Sludge on filter paper was obtained after filtering the collected waste water samples from different sections of a water treatment plant situated in an industrial area of Kanpur City. The LIBS spectra of the sludge samples were recorded in the spectral range of 200 to 500 nm by focusing the laser light on sludge. Calibration-free laser-induced breakdown spectroscopy (CF-LIBS) technique was used for the quantitative measurement of toxic elements such as Cr and Pb present in the sample. We also used the traditional calibration curve approach to quantify these elements. The results obtained from CF-LIBS are in good agreement with the results from the calibration curve approach. Thus, our results demonstrate that CF-LIBS is an appropriate technique for quantitative analysis where reference/standard samples are not available to make the calibration curve. The results of the present experiment are alarming to the people living nearby areas of industrial activities, as the concentrations of toxic elements are quite high compared to the admissible limits of these substances.     

Removal of toluene vapour from air stream using a biofilter packed with polyurethane foam

Biodegradation of toluene vapour was investigated for 168 days in a polyurethane packed biofilter inoculated with a mixed microbial population. Biofilter consisted of five square cross-section modular units each of size 0.16 m × 0.16 m × 0.20 m and filled with the polyurethane foam cubes up to a height of 0.15 m. Inlet concentration of toluene was varied from 0.04 to 2.5 g m^?3 and the volumetric flow rate of toluene loaded air from 0.06 to 0.90 m³ h^?1.Depending upon initial loading rates, removal efficiency ranging from 68.2 to 99.9% and elimination capacity ranging from 10.85 to 90.48 g h^?1 m^?3 were observed during steady state operations. More than 90% removal efficiency was observed up to an inlet loading rate of 76.3 g h^?1 m^?3. High carbon recovery (>90%) indicated effective biodegradation in the bed. Low variation of pH (7.2–8.8) and pressure drop (45.8–76.3 Pa) was observed. The stability of the biomass was evident from the fast response of the biofilter to shutdown and restartup.     

Leaf surface structure alterations due to particulate pollution in some common plants

The plant foliar surface is the most important receptor of atmospheric pollutants. It undergoes several structural and functional changes when particulate-laden air strikes it. In the present investigation, ten annual plant species viz., Abelmoschus esculentus, Celosia cristata, Coleus blumei, Cyamopsis tetragonolobus, Gomphrena globosa, Impatiens balsamina, Ocimum sanctum, Phaseolus vulgaris, Solanum melongena, and Zinnia elegans were studied for their growth parameters and leaf morphological features. They were subjected to dust experimentally for 60 days. The micro-morphological traits like wax, cuticle, epidermis, stomata, and trichomes were observed under light and scanning electron microscopes. Remarkable differences in the growth parameters and micro-morphological features were recorded in the dust-treated plants when compared to the respective controls. The reduction in growth parameters, the size of epidermal cells, and stomata were reduced and cuticle damage was also observed. The relative proportion of fine particles, which play a major role in hampering the overall growth of a plant, was higher in comparison to ultra-fine and coarse particles.     

Estimation of Heavy Metals in Different Berberis Species and Its Market Samples

Popularity of herbal drugs is increasing all over the world because of lesser side effects as compared to synthetic drugs. Besides, it costs less and easily available to poor people particularly in developing countries. But quality assurance of herbal drugs is very necessary prior to its use. Because in today's polluted environment, even herbal drugs are not safe. Berberis spp. is very important medicinal plant, having various medicinal properties. It is also included in Indian and British pharmacopoeias. Its demand is quite high in herbal drug market. So, to check the quality of market samples of this drug, ten different samples were procured from different drug markets of India for heavy metal estimation. Besides, genuine samples of four species of Berberis viz. B. aristata, B. chitria, B. lycium, B. asiatica were also collected from natural habitats to compare heavy metal concentration in both market and genuine samples. It was found that market samples were much more contaminated than genuine samples. Lead (Pb) concentration is far beyond from WHO permissible limit (10 ppm) for herbal drugs, reaching to maximum 49.75 ppm in Amritsar market sample. Likewise, concentration of all other metals like Cd, Cr and Ni were also very high in market samples as compared to genuine samples.     

Growth and biochemical parameters of Cicer arietinum L. grown on amended fly ash

Growth and metal accumulation were investigated in two Cicer arietinum L. varieties (var. CSG-8962 and var. C-235) when grown in various combinations of fly ash (FA) amended with garden soil (GS), press mud (PM) or saw dust (SD). In addition, the levels of photosynthetic pigments, nitrate reductase (NR) activity, cysteine, non-protein thiols (NP-SH), and ascorbic acid were studied. FA amended with GS or PM led to a 5–10 times increase in biomass compared to FA control and was most pronounced in the less metal tolerant variety CSG-8962. Amendment of FA with either GS or PM only moderately increased the contents of some essential metals whereas the non-essential Cd and Cr remained similar or decreased slightly compared to FA control. FA combined with either GS or PM increased the amount of photosynthetic pigments and was largely absent when SD was added to FA. Improved nitrogen availability led to increased nitrate reductase (NR) activity with all amendments but less so with SD. Metal stress indicating parameters were generally reduced (cysteine and non-protein thiols) or unchanged (ascorbic acid). In conclusion, of the tested ameliorants both GS and PM greatly improved growth of C. arietinum making FA a suitable component of plant growth substrates.     

Biofabrication of calcium phosphate nanoparticles using the plant Mimusops elengi

Nanoparticles are now widely applied in products. The synthesis of nanomaterials using biological materials is an emerging field, notably for medical applications because biologically derived compounds can be safe. For instance, calcium phosphate is a natural biomineral that possesses an excellent biocompatibility due to its chemical similarity to human hard tissue such as bone and teeth. Here, we synthesized calcium phosphate nanoparticles by using bark extract of Spanish cherry (Mimusops elengi). Calcium phosphate nanoparticles showed an absorbance at 275 nm by UV–visible analysis and particle size of 25 nm by nanoparticle tracking and analysis. Fourier transform infrared spectroscopy revealed the presence of aromatic amines as a capping and reducing agent. Transmission electron microscopy showed the presence of polydispersed spherical nanoparticles with an average size of 50 nm. Measurements of zeta potential revealed the stability of the synthesized calcium phosphate nanoparticles. These particles demonstrated antibacterial activity against Streptococcus mutans, Staphylococcus aureus and Escherichia coli. We conclude that the synthesis of calcium phosphate nanoparticles by using a M. elengi is easy, eco-friendly and scalable.     

Sorption of nano-C60 clusters in soil: hydrophilic or hydrophobic interactions?

We studied the sorption behaviour of fullerene nano-C(60) particles (nC(60)) in soil from binary solvent mixtures of ethanol-water in order to critically evaluate the previous reports in the literature that the partitioning mechanism explains the soil sorption of fullerene C(60) as hydrophobic molecules. The sorption of nC(60) particles was studied in a range of solvent mixtures by changing volume fractions of ethanol from 20 to 100 percent. Sorption and particle characteristics were found to be very different in ethanol : water mixtures above and below 60% ethanol. In the range of 20-60% ethanol, sorption increased from 1.2 to 14.6 L kg(-1) accompanied by a change in zeta (ζ) potential from -32.4 to -7.2 mV. This observation can be attributed to hydrophilic interactions that negatively charged nC(60) particles undergo with soil colloids and water molecules. From 60% to 100% ethanol volume fractions, hydrophobic interactions of weakly charged nanoparticles may control the overall extent of soil sorption. The findings of this study indicate the importance of hydrophilic forces in controlling the sorption behaviour of nC(60) particles which are stabilized in water dominated solvent mixtures. The validity of the partitioning mechanism and K(OC) modelling approach in describing and estimating the sorption of nC(60) particles in soil (previously suggested in the literature) are, therefore, questioned.     

Connecting international priorities with human wellbeing in low-income regions: lessons from hawksbill turtle conservation in El Salvador

Hawksbill turtles (Eretmochelys imbricata) are highly endangered in the eastern Pacific Ocean, yet their eggs continue to be an important subsistence resource for impoverished coastal residents in El Salvador. In this study, we use naturalistic inquiry to explain the realities experienced by coastal residents who share habitat with hawksbills in El Salvador, and then suggest implications of the disparities between these realities and international priorities for hawksbill conservation and community development in El Salvador and other low-income regions. To provide a context for understanding hawksbill conservation and its implications for similar challenges related to conservation and wellbeing, we first summarise the conservation context, including the emergence of sea turtle conservation in El Salvador. We then describe our naturalistic approach, including the ethnographic methodology for this study. Finally, we detail the analysis of interviews conducted with tortugueros (i.e. local sea turtle egg collectors), to help explain how hawksbills fit into local realities. Our results demonstrate that, from the perspective of tortugueros, (1) the primary importance of hawksbills is the economic value attached to egg sales, but there exists a deeper connection to local culture; (2) egg purchase by hatcheries is a socially just conservation strategy that benefits both hawksbill and human wellbeing; and (3) opportunities for local residents to participate in decision-making regarding sea turtle conservation are limited, and should be increased. We argue that harmonising international conservation priorities with local community development realities is one path towards simultaneously contributing to long-term sea turtle recovery and human wellbeing in low-income regions.