Factors associated with multiple-pass procedures during chorionic villus sampling: A video analysis

Multiple placental passes during chorionic villus sampling (CVS) increase the risk of fetal loss; however, specific factors that predispose to repeat aspiration have not been delineated. To identify anatomic and technical variables associated with multiple-pass procedures, a detailed review of 205 videotaped CVS procedures (single pass = 163; multiple pass = 42) was performed, blinded to pregnancy outcome. The route of sampling did not influence the need for multiple aspiration attempts (transabdominal—30/ 135; transcervical—12/70), nor was placental location alone discriminatory. However, the combination of a posterior placenta and uterine retroversion was observed more frequently in the multiple-pass cohort (8/42 vs. 9/163; p<0.05). In transabdominal cases, suboptimal needle placement (e.g., perpendicular to the placental long axis) was more common in the initial aspiration of a multiple-pass procedure (21/30 vs. 38/105;p<0.01), while limited penetration of the catheter tip (e.g., just inside the placental edge) characterized a majority of multiple-pass cases in the transcervical subset (7/12 vs. 3/58; p<0.0001). A case-control cohort was constructed to evaluate the impact of these technical variables on sampling efficacy, independent of the influence of uterine position and placental site. In that analysis, suboptimal location and/or orientation of the sampling device remained characteristic of multiple-pass cases. We conclude that further reduction in the frequency of multiple-pass procedures might be achieved by consistent placement of the device tip in the central placental mass. Unlike amniocentesis, where any point of amnion entry will suffice, this technical nuance should be emphasized with CVS to maximize the single-pass success rate.     

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Tool life has been a vital issue in machining titanium alloys. Recently, an atomization-based cutting fluid (ACF) application has been found to be an effective approach for cooling and lubrication in micromachining operations. In this study, an ACF spray system is developed for macro-scale turning of Ti–6Al–4V. The spray system is designed to minimize interaction between the fluid droplets, and the gas nozzle to control the divergence of the fluid droplets. Experiments are conducted to study the effect of five specific ACF spray parameters including fluid flow rate, spray distance, impingement angle, and type and pressure level of the droplet carrier gas on cutting forces, tool life, and chip characteristics. It has been observed that the combination of lower pressure (150 psi) air-mixed CO₂ with a higher flow rate (20 ml/min) and a larger spray distance (35 mm) produces a significantly longer tool life and broken chips. The results also reveal that the ACF spray system can extend tool life up to 40–50% over flood cooling.     

The response of a mid- and high latitude peat bog to predicted climate change: methane production in a 12-month peat incubation

There are fears that global warming will lead to degradation of peatlands, higher emissions of greenhouse gases from peat, and accelerated warming. Anaerobic decomposition of organic soils produces methane (CH₄), a potent greenhouse gas. Two peat bogs differing in mean annual temperature, Velke Darko (VD, Czech Republic, 7.2 °C), and Stor Åmyran (SA, Sweden, 4.0 °C), were selected for a comparative study of how organic soils in different climatic zones will respond to warmer and drier conditions. Twenty peat cores from each bog were incubated in growth chambers. Under present-day summer conditions, VD produced 14 times more CH₄ than SA. Two different warming scenarios were used. Peat-core replicates were kept at temperatures of 11 versus 16 °C, and 11 versus 22 °C. From 11 to 16 °C, the CH₄ production slightly decreased at SA, and slightly increased at VD. From 11 to 22 °C, the CH₄ production increased 9 times at SA, but slightly decreased at VD. After an 8-month incubation, peat cores under drying conditions (water table at ?14 cm) were compared to samples with original water table (?2 cm). Drying conditions led to a steeper reduction in CH₄ production at VD, compared to SA. The CH₄ production decreased more than 100 times at VD. Then, the combined effect of simultaneous warming and drying at 11 and 22 °C was studied. We did not find any significant effect of interactions between increasing temperature and decreasing water table level. Overall, the warmer site VD responded more strongly to the simulated climate change than the colder site SA.     

An air quality forecasting system in Beijing - Application to the study of dust storm events in China in May 2008

An air pollution forecast system, ARIA Regional, was implemented in 2007-2008 at the Beijing Municipality Environmental Monitoring Center, providing daily forecast of main pollutant concentrations. The chemistry-transport model CHIMERE was coupled with the dust emission model MB95 for restituting dust storm events in springtime so as to improve forecast results. Dust storm events were sporadic but could be extremely intense and then control air quality indexes close to the source areas but also far in the Beijing area. A dust episode having occurred at the end of May 2008 was analyzed in this article, and its impact of particulate matter on the Chinese air pollution index (API) was evaluated. Following our estimation, about 23 Tg of dust were emitted from source areas in Mongolia and in the Inner Mongolia of China, transporting towards southeast. This episode of dust storm influenced a large part of North China and East China, and also South Korea. The model result was then evaluated using satellite observations and in situ data. The simulated daily concentrations of total suspended particulate at 6:00 UTC had a similar spatial pattern with respect to OMI satellite aerosol index. Temporal evolution of dust plume was evaluated by comparing dust aerosol optical depth (AOD) calculated from the simulations with AOD derived from MODIS satellite products. Finally, the comparison of reported Chinese API in Beijing with API calculated from the simulation including dust emissions had showed the significant improvement of the model results taking into account mineral dust correctly.     

应用IVE模型计算上海市机动车污染物排放

为了解上海市机动车污染现状,建立上海市机动车源排放清单,分别选择上海市中心城区、商业区和收入相对较低区域中的主干道、快速道和次干道3种共9条典型道路,开展机动车技术水平参数、比功率(VSP)分布状况、启动状况等测试,并在此基础上将International Vehicle E-mission(IVE)模型本地化.调查结果表明,上海市区实际道路上轻型客车、出租车、公交巴士、卡车和摩托车(包含助动车)分别占道路总车流量的41.0%、30.8%、15.6%、6.9%和5.7%;从技术组成看,约85%的轻型客车和97%的出租车均安装有三元催化装置,约30%的公交巴士和90%的卡车没有达到欧Ⅰ标准;机动车的VSP分布主要集中在-2.9～1.2 kw·t-1.模式计算结果表明,2004年上海市机动车CO、VOC、NOx和PM排放量分别为57.06×104t、7.75×104t、9.20×104t和0.26×104t;20%的高排放车对总排放量的贡献占到25%～45%;启动过程中排放的CO、VOC和PM占总排放量的15%～25%,NOx仅占总排放量的4.5%.     

Catastrophe and the life span of coral reefs

A strong earthquake in the western Caribbean in 2009 had a catastrophic impact on uncemented, unconsolidated coral reefs in the central sector of the shelf lagoon of the Belizean barrier reef. In a set of 21 reef sites that had been observed prior to the earthquake, the benthic assemblages of 10 were eradicated, and one was partially damaged, by avalanching of their slopes. Ecological dynamics that had played out over the previous 23 years, including the mass mortalities of two sequentially dominant coral species and a large increase in the cover of an encrusting sponge, were instantaneously rendered moot in the areas of catastrophic reef-slope failure. Because these prior dynamics also determined the benthic composition and resilience of adjacent sections of reef that remained intact, the history of disturbance prior to the earthquake will strongly influence decadal-scale recovery in the failed areas. Geological analysis of the reef framework yielded a minimum return time of 2000-4000 years for this type of high-amplitude event. Anthropogenic degradation of ecosystems must be viewed against the backdrop of long-period, natural catastrophes, such as the impact of strong earthquakes on uncemented, lagoonal reefs.     

Kinetics of heat-assisted persulfate oxidation of methyl tert-butyl ether (MTBE)

The kinetics of heat-assisted persulfate oxidation of methyl tert-butyl ether (MTBE) in aqueous solutions at various pH, temperature, oxidant concentration and ionic strength levels was studied. The MTBE degradation was found to follow a pseudo-first-order decay model. The pseudo-first-order rate constants of MTBE degradation by persulfate (31.5 mM) at pH 7.0 and ionic strength 0.11 M are approximately 0.13 x 10(-4), 0.48 x 10(-4), 2.4 x 10(-4) and 5.8 x 10(-4) S(-1) at 20, 30, 40 and 50 degrees C, respectively. Under the above reaction conditions, the reaction has an activation energy of 24.5 +/- 1.6 kcal/ mol and is influenced by temperature, oxidant concentration, pH and ionic strength. Raising the reaction temperature and persulfate concentration may significantly accelerate the MTBE degradation. However, increasing both pH (over the range of 2.5-11) and ionic strength (over the range of 0.11-0.53 M) will decrease the reaction rate. Reaction intermediates including tert-butyl formate, tert-butyl alcohol, acetone and methyl acetate were observed. These intermediate compounds were also degraded by persulfate under the experimental conditions. Additionally, MTBE degradation by persulfate in a groundwater was much slower than in phosphate-buffer solutions, most likely due to the presence of bicarbonate ions (radical scavengers) in the groundwater.