Interactions of Environmental Factors on the Sensitivity of Plants to Air Pollution

Before potential damage to vegetation can be adequately forecast, even after an air pollution alert has been placed in effect, a clear understanding of the interactions of environment on plant sensitivity must be ascertained. This involves detailed study of single factors and then multiple factors using the phytotoxicants in question. Factors studied or suggested include light (quality, intensity, and duration), temperature, carbon dioxide concentration, humidity, wind, soil moisture, soil aeration, nutrient levels, and soil texture. This paper presents a review of the work relating plant injury to specific air pollutants as conditioned by several environmental conditions supported by research on the interactions of ozone with these environmental conditions.     

Ozone Dosage Response of Ponderosa Pine Seedlings

Photochemical oxidant injury to ponderosa pine (Pinus ponderosa Laws) is a severe problem in the southern California mountains. Three-year-old ponderosa pines fumigated in controlled environment chambers with ozone at 0.15, 0.30, or 0.45 ppm had apparent photosynthesis rates reduced by 10, 70, and 85%, respectively, after 30 days exposure. A fumigation with 0.30 ppm ozone for 33 days depressed the cold perchloric acid extracted polysaccharides of both current and one-year-old needles by 40%. The 80% ethanol soluble sugar concentration of current year, ozone-injured needles increased 16% and that of the one-year-old needles decreased slightly. Both carbohydrate fractions of control trees in carbon-filtered air increased moderately. Higher, endogenous concentrations of ascorbic acid in needles did not protect the tissue from ozone injury. Apparent photosynthesis rate was a sensitive index for ozone dosage response. Needle carbohydrate depletion probably induces premature abscission.     

Determination of the Detailed Hydrocarbon Composition and Potential Atmospheric Reactivity of Full-Range Motor Gasolines

The quantitative data obtained with a capillary GLC method, which is used to determine the individual C₃-C₁₂ hydrocarbons in full-range motor gasolines, have been employed in a computer program to calculate the hydrocarbon composition of the vapor in equilibrium with a gasoline at 100°F, as well as the equilibrium vapor-pressure of the gasoline at that temperature. The method used for computation is similar to that previously described by McEwen, assuming the gasoline to behave as an ideal liquid. Also calculated is the potential atmospheric reactivity of this equilibrium vapor relative to that from other gasolines when specific reactivity weighting factors for the individual hydrocarbons are employed. Calculated total vapor-pressure data agree well with experimental Reid vapor-pressure data obtained for typical premium-grade gasolines. Definite differences were observed in the relative potential atmospheric reactivities calculated at 100°F for the equilibrium vapors from the test gasolines.     

enforcement of diesel smoke emissions for the state of new jersey

This paper reports on the research program undertaken by the State of New Jersey to determine those tests and instruments which can be used by authorized state agencies for the enforcement of diesel smoke emissions. The state agencies under consideration for the enforcement of diesel smoke emissions are the following: (1) The Division of Motor Vehicles, in its system of state owned inspection stations, will be able to inspect all diesel-powered trucks, and tractors which are registered in New Jersey. (2) The Public Utilities Commission will be able to inspect at their home garages all buses registered in the State. (3) The New Jersey State Police will be able to inspect diesel-powered vehicles on the road. It was decided that the maximum inspection time for each vehicle was not to exceed one minute. On the basis of the one minute per vehicle requirement, eight different tests were evaluated to determine which ones correlated well with normal vehicle operation. These tests included acceleration of a fixed external inertia, free acceleration of only the moving parts of the engine, three ramp tests, a test in which a heavy vehicle was towed, and a driving test in which the vehicle being tested was actually accelerated. The results of tests demonstrated that the modified free acceleration method correlates reasonably well with a loaded steady state cycle, distinguishes the high emitters and is simple to perform. Consequently, the free acceleration test method is recommended for use in inspection stations and on the road. Finally, nearly two hundred vehicles have been tested by this procedure to determine present and potential levels of diesel smoke emissions. Another phase of the program consisted of the determination of smoke measuring techniques and instrumentation. The use and design of smokemeters were extensively investigated, as well as the use of the visual and photographic techniques. Of the various smokemeters tested for this application, several measured smoke satisfactorily in the laboratory, but none were found adequate for field use; they either lacked portability or were unstable due to the deposition of soot on the optics. At the time of writing, specifications for the necessary smokemeter have been drafted and published for bid to interested manufacturers.     

Ozone Injury to Pinus Strobus

In a study of the ozone-induced needle blight of eastern white pine in central New York, acute injuries naturally induced on field trees during a year of relatively low ozone concentrations (1 966) were compared with injuries induced during a year of higher concentrations (1967). Injuries were more frequent and severe and were associated with higher mean ozone concentrations in 1967 than in 1966. Characteristic symptoms were induced on foliage of pine branches exposed to controlled doses of ozone as low as 7 ± 1 pphm for four hours or 3 ± 1 pphm for 48 hours. Such doses were equalled or exceeded two and four times, respectively, in the field during the 1 967 season. Ozone sensitivity of pine needle tissue was increased by fumigation in atmospheres containing water mist. High concentrations of ozone (40-60 pphm) caused general injury of foliage of both ozone-susceptible and resistant trees; the symptoms were unlike those found in the field or caused by fumigation with low concentrations of ozone.     

New PbO2, Support for the Measurement of Sulfation

Since 1966, the Division of Laboratories of the Department of Health of the City of Montreal is carrying on measurements of gaseous pollutants. In order to efficiently use the technical staff that our administrators wanted to devote to the fight against air pollution, a new lead dioxide support for the determination of sulfur dioxide has been devised. The preparation of candies according to the standard method requires much time and skill from the operator, whereas the technique that is proposed is rapid, easy, and provides plates of a high degree of uniformity. A technician with little experience can coat a great number of plates per day with no difficulty. N. A. Huey working at the National Center for Air Pollution Control in Cincinnati published in the September 1968 issue of this Journal a new technique which consists of coating the inside of a plastic Petri dish with a PbO² paste. His method also has the above mentioned advantages. The plates that are suggested allow a simplification of the preliminary work for several types of analyses such as gra-vimetry,¹ colorimetry,³ turbidimetry,^4,5 titrimetry,⁶ and nephelemetry.⁸     

The Removal of Particulate Matter from Fluid Bed Catalytic Cracking Unit Stack Gases

The application of a high-efficiency centrifugal type of separator to fluid bed catalytic cracking units is described in which most of the catalyst particles often lost to the atmosphere are concentrated into a small part of the stack gas (2%). A further separation can then be made on this small stream by an auxiliary separator which further concentrates the catalyst particle into 0.1% of the initia stream. Performance of the main and auxiliary separators are such as to reduce the loss of catalyst particles in the stack gas from 800 ppm to less than 60 ppm in a typical unit. Large amounts of power can be recovered by application of expander turbines to catalytic cracking plants employing this system of separation.