An on-farm survey of spatial and temporal stratifications of 17β-estradiol concentrations

17β-estradiol (E2) is a natural estrogenic hormone found in animal manure and urine, which may cause endocrine disruption in sensitive organisms. 17β-Estradiol has been widely detected in the environment, and animal agriculture may be an important source. The objectives of this study were to investigate the potential sources and/or spatial and temporal characteristics contributing to detections of E2 at the farm-scale. Soil cores, segmented into 0.15 m increments, were taken down to the water table from four locations (three potential E2 sources and one control) at or around a swine (Sus scrofa domesticus) farm on five different dates between 2006 and 2007. Estradiol was quantified in the soil-water extracts using liquid chromatography-with tandem mass spectrometry (LC/MS/MS) analysis. Estradiol detections were widespread and found in 128 out of 345 extractions (37%). Concentrations ranged from 0 to 1910 ng L⁻¹ (porewater equivalents). A location that received field application of manure had significantly lower E2 concentrations compared to other locations. Also, the spring 2007 E2 concentrations were significantly higher than all other sample dates, perhaps related to climatic and hydrological events. Results suggested E2 was not directly related to manure sources, but was widespread in this environment. Where E2 was detected, highest concentrations favored the upper profile, while the greatest frequency of detections was in the lower profile and near the water table. Detections of E2 were associated with high organic mater contents in the upper profile and high sand contents in the lower profile. The study suggests that E2 is widespread in some soil environments, raising questions as to the source and mechanisms that facilitate its transport and mobility.     

Feasibility of ultraviolet-light-emitting diodes as an alternative light source for photocatalysis

The objective of this study was to determine whether ultraviolet-light-emitting diodes (UV-LEDs) could serve as an efficient photon source for heterogeneous photocatalytic oxidation (PCO). An LED module consisting of 12 high-power UV-A (lambda max = 365 nm) LEDs was designed to be interchangeable with a UV-A fluorescent black light blue (BLB) lamp for a bench scale annular reactor packed with silica-titania composite (STC) pellets. Lighting and thermal properties of the module were characterized to assess its uniformity and total irradiance. A forward current (I(F)) of 100 mA delivered an average irradiance of 4.0 mW cm(-2) at a distance of 8 mm, which is equivalent to the maximum output of the BLB, but the irradiance of the LED module was less uniform than that of the BLB. The LED and BLB reactors were tested for the oxidization of ethanol (50 ppm(v)) in a continuous-flow-through mode with 0.94 sec residence time. At the same average irradiance, the UV-A LED reactor resulted in a lower CO2 production rate (19.8 vs. 28.6 nmol L(-1) s(-1)), lower ethanol removal (80% vs. 91%), and lower mineralization efficiency (28% vs. 44%) than the UV-A BLB reactor. Ethanol mineralization was enhanced with the increase of the irradiance at the catalyst surface. This result suggests that reduced ethanol mineralization in the LED reactor relative to the BLB reactor at the same average irradiance could be attributed to the nonuniform irradiance over the photocatalyst, that is, a portion of the catalyst was exposed to less than the average irradiance. The potential of UV-A LEDs may be fully realized by optimizing the light distribution over the catalyst and utilizing their instantaneous "on" and "off" feature for periodic irradiation. Nevertheless, our results also showed that the current UV-A LED module had the same wall plug efficiency (WPE) of 13% as that of the UV-A BLB, demonstrating that UV-A LEDs are a viable photon source both in terms of WPE and PCO efficiency.     

Factors affecting nitrate distribution in shallow groundwater under a beef farm in South Eastern Ireland

Groundwater contamination was characterised using a methodology which combines shallow groundwater geochemistry data from 17 piezometers over a 2 yr period in a statistical framework and hydrogeological techniques. Nitrate–N (NO₃-N) contaminant mass flux was calculated across three control planes (rows of piezometers) in six isolated plots. Results showed natural attenuation occurs on site although the method does not directly differentiate between dilution and denitrification. It was further investigated whether NO₃-N concentration in shallow groundwater (<5 m below ground level) generated from an agricultural point source on a 4.2 ha site on a beef farm in SE Ireland could be predicted from saturated hydraulic conductivity (K_sat) measurements, ground elevation (m Above Ordnance Datum), elevation of groundwater sampling (screen opening interval) (m AOD) and distance from a dirty water point pollution source. Tobit regression, using a background concentration threshold of 2.6 mg NO₃-N L⁻¹ showed, when assessed individually in a step wise procedure, K_sat was significantly related to groundwater NO₃-N concentration. Distance of the point dirty water pollution source becomes significant when included with K_sat in the model. The model relationships show areas with higher K_sat values have less time for denitrification to occur, whereas lower K_sat values allow denitrification to occur. Areas with higher permeability transport greater NO₃-N fluxes to ground and surface waters. When the distribution of Cl⁻ was examined by the model, K_sat and ground elevation had the most explanatory power but K_sat was not significant pointing to dilution having an effect. Areas with low NO₃ concentration and unaffected Cl⁻ concentration points to denitrification, low NO₃ concentration and low Cl⁻ chloride concentration points to dilution and combining these findings allows areas of denitrification and dilution to be inferred. The effect of denitrification is further supported as mean groundwater NO₃-N was significantly (P < 0.05) related to groundwater N₂/Ar ratio, redox potential (Eh), dissolved O₂ and N₂ and was close to being significant with N₂O (P = 0.08). Calculating contaminant mass flux across more than one control plane is a useful tool to monitor natural attenuation. This tool allows the identification of hot spot areas where intervention other than natural attenuation may be needed to protect receptors.     

Estimating the effect of nitrogen fertilizer on the greenhouse gas balance of soils in Wales under current and future climate

The Welsh Government is committed to reduce greenhouse gas (GHG) emissions from agricultural systems and combat the effects of future climate change. In this study, the ECOSSE model was applied spatially to estimate GHG and soil organic carbon (SOC) fluxes from three major land uses (grass, arable and forest) in Wales. The aims of the simulations were: (1) to estimate the annual net GHG balance for Wales; (2) to investigate the efficiency of the reduced nitrogen (N) fertilizer goal of the sustainable land management scheme (Glastir), through which the Welsh Government offers financial support to farmers and land managers on GHG flux reduction; and (3) to investigate the effects of future climate change on the emissions of GHG and plant net primary production (NPP). Three climate scenarios were studied: baseline (1961–1990) and low and high emission climate scenarios (2015–2050). Results reveal that grassland and cropland are the major nitrous oxide (N₂O) emitters and consequently emit more GHG to the atmosphere than forests. The overall average simulated annual net GHG balance for Wales under baseline climate (1961–1990) is equivalent to 0.2 t CO₂e ha^?1 y^?1 which gives an estimate of total annual net flux for Wales of 0.34 Mt CO₂e y^?1. Reducing N fertilizer by 20 and 40 % could reduce annual net GHG fluxes by 7 and 25 %, respectively. If the current N fertilizer application rate continues, predicted climate change by the year 2050 would not significantly affect GHG emissions or NPP from soils in Wales.     

Relationships between soil physicochemical, microbiological properties, and nutrient release in buffer soils compared to field soils

The retention of nutrients in narrow, vegetated riparian buffer strips (VBS) is uncertain and underlying processes are poorly understood. Evidence suggests that buffer soils are poor at retaining dissolved nutrients, especially phosphorus (P), necessitating management actions if P retention is not to be compromised. We sampled 19 buffer strips and adjacent arable field soils. Differences in nutrient retention between buffer and field soils were determined using a combined assay for release of dissolved P, N, and C forms and particulate P. We then explored these differences in relation to changes in soil bulk density (BD), moisture, organic matter by loss on ignition (OM), and altered microbial diversity using molecular fingerprinting (terminal restriction fragment length polymorphism [TRFLP]). Buffer soils had significantly greater soil OM (89% of sites), moisture content (95%), and water-soluble nutrient concentrations for dissolved organic C (80%), dissolved organic N (80%), dissolved organic P (55%), and soluble reactive P (70%). Buffer soils had consistently smaller bulk densities than field soils. Soil fine particle release was generally greater for field than buffer soils. Significantly smaller soil bulk density in buffer soils than in adjacent fields indicated increased porosity and infiltration in buffers. Bacterial, archaeal, and fungal communities showed altered diversity between the buffer and field soils, with significant relationships with soil BD, moisture, OM, and increased solubility of buffer nutrients. Current soil conditions in VBS appear to be leading to potentially enhanced nutrient leaching via increasing solubility of C, N, and P. Manipulating soil microbial conditions (by management of soil moisture, vegetation type, and cover) may provide options for increasing the buffer storage for key nutrients such as P without increasing leaching to adjacent streams.     

Thermal Encapsulation of Metals in Superfund Soils

Abstract

Superfund sites frequently contain both heavy metals and organic hazardous waste. If not properly controlled, the metals may be changed to a more leachable form and may also be emitted to the atmosphere via the exhaust stack. This paper documents a batch kiln R&D test program to solve these metal-related problems. It was performed under the U.S. EPA’s SITE (Superfund Innovative Technology Evaluation) Emerging Technology Program. Allis Mineral Systems has developed the Thermal Encapsulation Process. Metals with limits set by EPA’s TCLP (Toxicity Characteristic Leaching Procedure) test and BIF (boiler and industrial furnace) stack emission regulations, such as cadmium, chromium, and lead, are the initial target of this process. This process, while unproven in these areas, may also apply to mixed waste (EPA hazardous waste/low-level radioactive wastes) and may also benefit commercial hazardous waste or Superfund thermal treatment systems. The results of the SITE tests were positive: strong, durable nodules were produced with excellent crush strength and improved resistance to leaching. Feed preparation, particularly control of moisture content, was found to be a key element in initiation of agglomeration. A good correlation was found between decreasing TCLP metals leachate levels and increasing crush strength.     

Conflicts between biodiversity conservation and human activities in the central and eastern European countries

Conflicts between the conservation of biodiversity and other human activities have been and continue to be of increasing concern in the European Union, often having important political, economic, and environmental repercussions. These conflicts have been addressed in the European Union by using a wide array of top down and bottom up tools, with varying degrees of success. A new challenge is now facing Europe with the integration of 10 new countries in the European Union (EU) and an additional range of biodiversity-rich habitats placed under EU legislation. The rich biodiversity of the central and eastern European countries (CEEC) is likely to be threatened by some aspects of the integration process, and conflicts between the conservation of biodiversity and other human activities are expected. In this paper, we review certain existing conflicts between biodiversity conservation and human activities in the CEEC, expected conflicts associated with integration to the EU, particularly in terms of new policy and legislation implementation, and, finally, explore possible conflict management options.     

Solubilization, solution equilibria, and biodegradation of PAH's under thermophilic conditions

Biodegradation rates of PAHs are typically low at mesophilic conditions and it is believed that the kinetics of degradation is controlled by PAH solubility and mass transfer rates. Solubility tests were performed on phenanthrene, fluorene and fluoranthene at 20 degrees C, 40 degrees C and 60 degrees C and, as expected, a significant increase in the equilibrium solubility concentration and of the rate of dissolution of these polycyclic aromatic hydrocarbons (PAHs) was observed with increasing temperature. A first-order model was used to describe the PAH dissolution kinetics and the thermodynamic property changes associated with the dissolution process (enthalpy, entropy and Gibb's free energy of solution) were evaluated. Further, other relevant thermodynamic properties for these PAHs, including the activity coefficients at infinite dilution, Henry's law constants and octanol-water partition coefficients, were calculated in the temperature range 20-60 degrees C. In parallel with the dissolution studies, three thermophilic Geobacilli were isolated from compost that grew on phenanthrene at 60 degrees C and degraded the PAH more rapidly than other reported mesophiles. Our results show that while solubilization rates of PAHs are significantly enhanced at elevated temperatures, the biodegradation of PAHs under thermophilic conditions is likely mass transfer limited due to enhanced degradation rates.     

Spatial and temporal analysis of pharmaceutical concentrations in the upper Tennessee River basin

The behavior of pharmaceutical compounds in aquatic ecosystems is not well defined. In order to determine spatial and temporal variations in concentrations of pharmaceuticals in the Tennessee River, water samples were collected from multiple points along the river and at the inflow of major tributaries. Sampling structure was designed to investigate trends between surface and subsurface samples, seasonal trends (winter, spring, summer, and fall), the direct influence of sewage treatment plants (upstream versus downstream), and the effect of downstream distance on pharmaceutical concentrations. All samples were quantified via solid phase extraction followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). This method yielded reproducible quantitation at low parts per trillion (ng L(-1)) levels for all 14 analytes (acetaminophen, atorvastatin, caffeine, carbamazepine, ciprofloxacin, diltiazem, fluoxetine, levofloxacin, lovastatin, norfluoxetine, ranitidine, sertraline, sulfamethoxazole, and trimethoprim). Correlation analyses (depth, distance) and repeated-measures ANOVAs (season, sewage treatment plant proximity) were used to determine statistically significant trends for frequently detected pharmaceuticals (caffeine, carbamazepine, sulfamethoxazole). Caffeine and sulfamethoxazole were found to vary by season in subsurface samples; spring exhibited the highest concentrations. Carbamazepine varied in proximity to sewage treatment plant outfall with subsurface samples yielding greater concentrations downstream than upstream. In addition, individual pharmaceuticals displayed positive correlation between surface and subsurface samples and negative correlation with downstream distance from the headwaters.     

Chemicals in Household Products: Problems with Solutions

The success of a regulatory regime in decreasing point-source emissions of some harmful chemicals has highlighted the significance of other sources. A growing number of potentially harmful chemicals have been incorporated into an expanding range of domestic household products and are sold worldwide. Tighter regulation has been proposed, and the European Commission has introduced the Regulation on the Registration, Evaluation, and Authorisation of Chemicals to address this concern. However, it is clear that in addition to the regulation, there is a potential to effect change through retailer and consumer attitudes and behaviours. Interviews were conducted with 7 key stakeholder groups to identify critical issues, which were then explored using a public survey questionnaire (1,008 respondents) and 8 subsequent focus groups. The findings demonstrated that the issue of chemicals in products is of concern to consumers for reasons of personal health rather than environmental protection. Key obstacles to the wider purchase of “green-alternative” products included perceived high cost and poor performance, lack of availability of products, and poor information concerning such products. Although improved regulation was seen as part of the solution, consumers must also play a role. It was clear from this study that consumers are not currently able to make informed choices about the chemicals they use but that they would be receptive to moving toward a more sustainable use of chemicals in the future if empowered to do so.