ECONOMIC INCENTIVES FOR AGRICULTURAL NONPOINT SOURCE POLLUTION CONTROL1

ABSTRACT. The limited success of command-and-control policies for reducing nonpoint source (NPS) water pollution mandated under the Federal Water Pollution Control Act (FWPCA) has prompted increased interest in economic incentive policies as an alternative control mechanism. A variety of measures have been proposed ranging from fairly minor modifications of existing policies to substantial revisions including watershed-wide polices that rely on economic incentives. While greater use of economic incentive policies, such as environmental bonds and point/nonpoint source trading is being advocated in the reauthorization of the CWA, the expected effects of individual proposals will be modest. The characteristics of NPS pollution, namely uncertainty and asymmetrical information, underscores that there is no single, ideal policy instrument for controlling the many types of agricultural NPS water pollution. Some of the usual incentive-based policies, such as effluent taxes, are not well suited to the task. Individual incentive policies proposed for the reauthorized CWA, such as pollution trading or deposit/refund systems, are not broadly applicable for heterogeneous pollution situations. Economic incentive policies may be appropriate in some cases, and command-and-control policies will be preferable in others and may in fact complement incentive policies.     

Water-induced erosion potentiality and vulnerability assessment in Kangsabati river basin,eastern India

Environment, Development and Sustainability - The large-scale water-induced erosion is one of the most determining elements on land degradation in subtropical monsoon-dominated region. From this...     

Catalyst assisted destruction of trichloro ethylene and toluene in corona discharges

ＩｎｔｒｏｄｕｃｔｉｏｎＴｒｉｃｈｌｏｒｏｅｔｈｙｌｅｎｅｉｓａｖｅｒｙｅｆｆｅｃｔｉｖｅｓｏｌｖｅｎｔｔｏｒｅｍｏｖｅｏｉｌｆｒｏｍｓｉｌｉｃｏｎａｎｄｏｔｈｅｒｍａｔｅｒｉａｌｓｕｓｅｄｉｎｓｅｍｉｃｏｎｄｕｃｔｏｒｉｎｄｕｓｔｒｙ.ＴｈｅＣ2ＨＣ...     

Destruction of VOCs by combination of corona discharge and catalysis techniques

The catalytic effect of alumina on the destruction of toluene, benzene, acetone and methanol, in DC pulsed corona discharge reactor was studied. In the presence of alumina the inlet concentration of the VOCs was varied from 5 x 10-6 mol/L to 80% x 10-6 mol/L, and their decomposition efficiency (conversion %) was found to be 99%-80% for toluene, 99%-97% for benzene, 95%-92% for acetone, and 72%-85% for methanol. Corresponding decomposition in the absence of alumina was 90%-38% for toluene, 89%-57% forbenzene, 42%-30% for acetone, and 47%-19% for methanol. Feed gas flow rate was 400 cm3/min and power reading from DC source was 7.4 W in all of the experiments. Alumina also shifted the CO/CO2 ratio in the by-products in favor of CO2. Ozone concentration at the reactor outlet was higher in the presence of alumina. Enhancement in VOCs decomposition by alumina was explained on the basis of higher concentration of ozone and its precursor atomic oxygen [O].Decomposition efficiency (conversion %) for individual compounds was found to be inversely proportional to the ionization potential of the compound, under identical conditions. Double DC high voltage sources pulse generator was tested and found to improve VOCs decomposition compared with the conventional single DC high voltage source.     

Evaporation behaviour of different organic effluents from open surfaces

Production of large quantities of effluents from different industrial units and the problems of their disposal necessitated this evaporation study. The evaporation of water, sewage water, oil refinery effluent, papermill effluent and liquor distillery effluent was observed in glass beakers when placed (i) in an oven at 60 degrees C and (ii) in screen house for 30 days, by periodically weighing of the beakers. In other experiments, the effect of increasing the frequency of stirring on increasing the evaporation efficiency of the liquor distillery effluent (ELD) was examined in detail. All of the organic effluents except ELD had similar evaporation behaviours as water, but formation of a self-forming film caused the evaporation of ELD to be considerably lower. Resistance to evaporation caused by this film was found to be a decreasing function of the frequency of stirring. This study has a bearing on improving the efficiency of evaporation lagoons, and three stirrings in a day with a manually drawn stirrer in a full-scale lagoon are proposed as a practical and economically viable technique to save 44% of lagoon land in arid and semi-arid regions of the world.     

Health risk assessment of hexachlorocyclohexane in soil,water and plants in the agricultural area of Potohar region,Punjab, Pakistan

Environmental Geochemistry and Health - As the largest organ of the human body, the skin is the major exposure route of NO2. However, the evidence for a relationship between NO2 exposure and...     

脉冲电晕放电降解CFC-113和CCl4

催化降解ＣＦＣ－１３３和ＣＣｌ４难度较大。采用脉冲电晕与吸附相结合,在电晕反应器中加入吸附剂（如γ－Ａｌ２Ｏ３）,显著提高了降解效果。实验结果揭示吸附剂的比表面与孔径大小显著影响ＣＦＣ－１１３和ＣＣｌ４的降解反应活性以及副产物臭氧浓度。本研究开发出一种Ａｌ２Ｏ３－Ⅱ吸附剂,它的比表面为９４．４ｍ＾２／ｇ,孔径〈０．５μｍ,当它与高压脉冲电晕放电相结合时,一方面提高了降解率,另一方面抑制了臭氧生成,     

Organically Modified Nanoclay and Aluminum Hydroxide Incorporated Bionanocomposites towards Enhancement of Physico-mechanical and Thermal Properties of Lignocellulosic Structural Reinforcement

A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH)₃) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH)₃, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH)₃ were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH)₃ treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH)₃. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging.     

Organismic-level acute toxicology profiling of reactive azo dyes

In the present study, organismic-level acute toxicology profile of three reactive azo dyes, viz. Reactive Blue 221, Reactive Red 195, and Reactive Yellow 145, was investigated, by using bacterial (Pseudomonas aeruginosa, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Listeria monocytogenes, and Bacillus subtilis), fungal (Trichoderma asperellum, Aspergillus flavus, Fusarium fujikuroi, and Rhizoctonia solani), plant (Raphanus sativus, Triticum aestivum, Sorghum bicolor, and Phaseolus mungo), and aquatic (Artemia salina and Daphnia magna) specimens. Microbial test organisms (all the six bacteria and two fungi, i.e., T. asperellum and A. flavus) and D. magna were found to be relatively more sensitive towards the reactive azo dyes and their mixture, as the EC50 values were in the range of 80–330, 135–360, and 108–242 ppm for bacteria, fungi, and D. magna, respectively (but the effect was not acutely toxic). Moreover, the effect of dye mixture was comparable tothe individual dyes in almost all the tested microbial specimens. For plant seeds, the dye mixture was found to be relatively more inhibitory towards T. aestivum and R. sativus than the individual dyes. For S. bicolor and P. mungo seeds, the effect of the dye mixture was almost identical to the individual dyes. However, in all cases, EC50 values were in the range of 950–3500 ppm, which indicates a non-toxic effect on plant seed germination potential. Likewise, the dyes and their mixture were not acutely toxic for Artemia salina larvae (more sensitive to the dye mixture) and Daphnia magna neonates (EC50, 516–950 and 108–242 ppm, respectively).