Metals and organotins in multiple bivalve species in a one-off global survey

The Galathea 3 expedition circumnavigated the globe in 2006-2007 and collected marine samples from six continents. Bivalves were collected from harbours, other impacted locations and reference sites, and samples from 57 sites were analyzed for metals and 47 for organotins, to assess current contamination levels on a global scale. Metal concentrations in nine bivalve species were normalised to the Mytilidae family using conversion factors based on cosampled species and literature bioconcentration factors. The lowest metal and tributyltin concentrations were below background assessment concentrations (BACs) agreed in the Oslo-Paris convention (OSPAR) for the North Sea, and at most harbours the concentrations were orders of magnitude above BACs. The lowest concentrations of Cd and Pb measured here suggest that the BACs should be lower in a worldwide context. The sources of metals were classified according to human impact using principal component analysis. High relative concentrations of Hg, Pb and P were source indicators for industrial activity and land use; Zn, organotins, Cd and Cu for shipping activities, and V for oil spills. Generally the concentration levels at reference sites were low, but not always lower than expected impacted areas. The most contaminated areas were harbours, where especially Copenhagen, St Croix and Sydney, can be considered hotspots of tributyltin as well as a number of metals.     

A method for building spatial model of annual weed seed dispersal from experimental data and its application to simulating Bromus sterilis population dispersal

Spatial model of annual weed seed dispersal, in this article, was theoretically derived. According to the requirements of building the spatial model, we designed and done an indoor experiment of weed seed dispersal by wind. In the experiment, the seeds of Bromus sterilis were released at 100 cm height under different wind velocity conditions. Based on the experimental data, the spatial models of seed dispersal of the weed species were built, which were divided into three types according to the coefficient β < 0, β = 0, β > 0. The results showed that dispersal of annual weed seed in any direction obeyed an approximate Gaussian distribution; under the experimental conditions, spatial distribution type of weed seed dispersal changed with variation of wind velocity. Well-known Howard et al.'s model (Howard et al., 1991) of Bromus sterilis seed dispersal is an especial example of the model built in this article. The result of model analysis indicated that the distribution type described by Howard's model was similar to that of seed dispersal of the weed species at the height of 100 cm under the condition of lower wind velocity (about 2.18 m/s). Using CA simulation analysis we found that mean control agent applying to a cell with weed should have a decrease with an increase of wind velocity to prevent weed with the initial configuration from spreading, which implicated less herbicide needs spraying in every cell with weed on average when wind velocity increases.     

Application of a three-tier framework to assess ecological condition of Gulf of Mexico coastal wetlands

A multi-level coastal wetland assessment strategy was applied to wetlands in the northern Gulf of Mexico (GOM) to evaluate the feasibility of this approach for a broad national scale wetland condition assessment (US Environmental Protection Agency’s National Wetlands Condition Assessment). Landscape-scale assessment indicators (tier 1) were developed and applied at the sub-watershed (12-digit hydrologic unit code (HUC)) level within the GOM coastal wetland sample frame with scores calculated using land-use maps and geographic information system. Rapid assessment protocols (tier 2), using a combination of data analysis and field work, evaluated metrics associated with landscape context, hydrology, physical structure, and biological structure. Intensive site monitoring (tier 3) included measures of soil chemistry and composition, water column and pore-water chemistry, and dominant macrophyte community composition and tissue chemistry. Relationships within and among assessment levels were evaluated using multivariate analyses with few significant correlations found. More detailed measures of hydrology, soils, and macrophyte species composition from sites across a known condition gradient, in conjunction with validation of standardized rapid assessment method, may be necessary to fully characterize coastal wetlands across the region.     

Importance of food quantity to structural growth rate and neutral lipid reserves accumulated in Calanus finmarchicus

 Growth and developmental rates were determined for copepodids of Calanus finmarchicus (Gunnerus) from experimental seawater mesocosms in a western Norwegian fjord. The instantaneous growth rates (g) from copepodid stage I (CI) to adult ranged from 0.08 to 0.10 d⁻¹. Daily per capita mortality rate of the cohorts was as low as 0.012 d⁻¹ (1.2% d⁻¹). At local increasing temperatures (5.1 to 8.3 °C), development was equiproportional, and the cumulative median development time from egg to CV was approximately 65 d. CV moulted to males and females, and egg production was initiated. Enhancement of food resources by nutrient addition caused a 23.4% increase in growth rates from CI to adult. Additionally, copepodid stages showed a generally larger body size, carbon and nitrogen content and total storage lipid content (wax esters + triacylglycerols) in response to enhanced resources. Our data support an elsewhere proposed exponential-growth hypothesis; growth of the structural compartments and store lipids (mostly wax esters) was exponential during the copepodid stages. However, a sigmoidal pattern of growth best described growth of adult stages if reared at high resources, and depot lipid accumulation in late CVs and adults at high resources. Body nitrogen growth increased exponentially, however, no significant changes in nitrogen specific growth rates were found between individuals from low and high resources. CV and adults seem to have reached near-maximal weights at high resources, whereas structural weight continued to increase at low resources. Despite the differences in structural growth dynamics, cohort development was similar until the end of CV. During the onset of sexual differentiation, the male:female ratio and the adult:CV ratio were highest at high food resources, suggesting that the time used for the final moult depends on the feeding history of the copepods in relation to food quality and quantity. It appears that relatively small changes in food availability strongly influence the biochemical composition of C. finmarchicus copepodids. Received: 28 May 1999 / Accepted: 10 February 2000     

Effects of pre-treatment technologies on quantity and quality of source-sorted municipal organic waste for biogas recovery

Source-sorted municipal organic waste collected from different dwelling types in five Danish cities and pre-treated at three different plants was sampled and characterized several times during one year to investigate the origin of any differences in composition of the pre-treated waste introduced by city, pre-treatment technology, dwelling type or annual season. The investigated pre-treatment technologies were screw press, disc screen and shredder+magnet. The average quantity of pre-treated organic waste (biomass) produced from the incoming waste varied between the investigated pre-treatment technologies: 59%, 66% and 98% wet weight, respectively (41%, 34% and 2% reject, respectively). The pre-treatment technologies showed differences with respect to distribution of the chemical components in the waste between the biomass and the rejected material (reject), especially for dry matter, ash, collection bag material (plastic or paper) and easily degradable organic matter. Furthermore, the particle size of the biomass was related to the pre-treatment technology. The content of plastic in the biomass depended both on the actual collection bag material used in the system and the pre-treatment technology. The sampled reject consisted mostly of organic matter. For cities using plastic bags for the source-separated organic waste, the expected content of plastic in the reject was up to 10% wet weight (in some cases up to 20%). Batch tests for methane potential of the biomass samples showed only minor variations caused by the factors city, pre-treatment technology, dwelling type and season when based on the VS content of the waste (overall average 459STPm(3)/tVS). The amount of methane generated from 1t of collected waste was therefore mainly determined by the efficiency of the chosen pre-treatment technology described by the mass distribution of the incoming waste between biomass and reject.     

Prenatal diagnosis of monosomy 18 and ring chromosome 18 mosaicism

The case of monosomy 18/ring chromosome 18 mosaicism which was detected prenatally by amniocentesis is presented. The pregnancy was terminated in week 18. Autopsy showed complex malformation of the fetus consisting of cebocephaly, hypotelorism, microphthalmia, severe defects of brain development, and arrest of placental maturation.     

Validation of FLACS against experimental data sets from the model evaluation database for LNG vapor dispersion

The siting of facilities handling liquefied natural gas (LNG), whether for liquefaction, storage or regasification purposes, requires the hazards from potential releases to be evaluated. One of the consequences of an LNG release is the creation of a flammable vapor cloud, that may be pushed beyond the facility boundaries by the wind and thus present a hazard to the public. Therefore, numerical models are required to determine the footprint that may be covered by a flammable vapor cloud as a result of an LNG release. Several new models have been used in recent years for this type of simulations. This prompted the development of the “Model evaluation protocol for LNG vapor dispersion models” (MEP): a procedure aimed at evaluating quantitatively the ability of a model to accurately predict the dispersion of an LNG vapor cloud.This paper summarizes the MEP requirements and presents the results obtained from the application of the MEP to a computational fluid dynamics (CFD) model – FLACS. The entire set of 33 experiments included in the model validation database were simulated using FLACS. The simulation results are reported and compared with the experimental data. A set of statistical performance measures are calculated based on the FLACS simulation results and compared with the acceptability criteria established in the MEP. The results of the evaluation demonstrate that FLACS can be considered a suitable model to accurately simulate the dispersion of vapor from an LNG release.     

Prediction of odor from pig production based on chemical odorants

The present work was performed to investigate the use of odorant measurements for prediction of odor concentration in facilities with growing-finishing pigs and to analyze the odorant composition in facilities with different floor and ventilation systems. Air was sampled in Nalophan bags, odor concentrations were measured by dilution-to-threshold olfactometry, and concentrations of odorants were measured by proton-transfer-reaction mass spectrometry (PTR-MS). Olfactometry and chemical analyses were synchronized to take place at identical time intervals after sampling. A principal component analysis revealed that different facilities for growing-finishing pigs can be distinguished based on the odorants. Pit ventilation comprising a small amount of the total ventilation air (10-20%) in facilities with both room and pit ventilation can be used to concentrate odorants, whereas the room ventilation contains lower concentrations of most odorants. A partial least squares regression model demonstrated that prediction of the odor concentration based on odorants measured by PTR-MS is feasible. Hydrogen sulfide, methanethiol, trimethylamine, and 4-methylphenol were identified as the compounds having the largest influence on the prediction of odor concentration, whereas carboxylic acids had no significant influence. In conclusion, chemical measurement of odorants by PTR-MS is an alternative for expressing the odor concentration in facilities with growing-finishing pigs that can be used to increase the understanding of odor from different types of facilities and improve the development of odor reduction technologies.