Associating Ecosystem Service Losses with Indicators of Toxicity in Habitat Equivalency Analysis

Habitat equivalency analysis (HEA) was developed as a tool to scale mitigation or restoration when habitat is contaminated by hazardous substances or has been otherwise harmed by anthropogenic activities. Applying HEA involves balancing reductions in habitat quality against gains from restoration actions, and quantifying changes in habitat quality in terms of ecological services. We propose a framework for developing ecological service definitions and measures that incorporate knowledge about the impacts of chemical contaminants on biota. We describe a general model for integrating multiple lines of evidence about the toxicity of hazardous substances to allow mapping of toxicological inputs to ecological service losses. We provide an example of how this framework might be used in a HEA that quantifies ecological services provided by estuarine sediments contaminated with polycyclic aromatic hydrocarbons.     

Reference Conditions of Alpine Streams: Physical Habitat and Ecology

Natural and near-natural streams are rare in the densely populated areas of the Alps. A variety of anthropogenic impacts have resulted in the alteration and sometimes even complete destruction of these systems. Nowadays it is difficult to find un-impacted streams that are strongly needed to define the natural variability and ecosystem processes. The results from freshwater inventories and habitat assessments conducted in protected areas in Austria (Nationalpark Hohe Tauern) and Italy (Naturpark Rieserferner-Ahrn) were used to develop a comprehensive typology of Alpine streams. Three different levels were used to discriminate between the distinct stream/river types: source (glacial vs. non-glacial), hierarchy (i.e. location within the stream system) and topography/ channel morphology. Important characters defining the structure and function of these stream types are gradient, substrate composition, flow pattern and riparian vegetation. Benthic fauna assemblages from 99 near-natural stream segments in glacial and non-glacial systems demonstrated the effect of glaciation on abundance levels of the total macroinvertebrate fauna, EPT taxa (Ephemeroptera, Plecoptera and Trichoptera) and the chironomid subfamily Diamesinae in different altitudes. A general decrease of abundances with increasing altitude was found. While stream segments with a degree of glaciation >10% primarily showed reduced abundances at all altitudes, lower (<10%) or no glaciation did not influence invertebrate abundances at lower reaches. Due to the near-natural conditions of the selected stream segments, a valuable definition of reference conditions of Alpine streams based on habitat characteristics is available. As a basis it offers excellent opportunities to conduct holistic interdisciplinary studies in protected areas in the future.     

Vegetation phenology gradients along the west and east coasts of Greenland from 2001 to 2015

The objective of this paper is to characterize the spatiotemporal variations of vegetation phenology along latitudinal and altitudinal gradients in Greenland, and to examine local and regional climatic drivers. Time-series from the Moderate Resolution Imaging Spectroradiometer (MODIS) were analyzed to obtain various phenological metrics for the period 2001–2015. MODIS-derived land surface temperatures were corrected for the sampling biases caused by cloud cover. Results indicate significant differences between West and East Greenland, in terms of both observed phenology during the study period, as well as the climatic response. The date of the start of season (SOS) was significantly earlier (24 days), length of season longer (25 days), and time-integrated NDVI higher in West Greenland. The sea ice concentration during May was found to have a significant effect on the date of the SOS only in West Greenland, with the strongest linkage detected in mid-western parts of Greenland.     

Revising REACH guidance on information requirements and chemical safety assessment for engineered nanomaterials for aquatic ecotoxicity endpoints: recommendations from the EnvNano project

The European Chemical Agency (ECHA) is in the process of revising its guidance documents on how to address the challenges of ecotoxicological testing of nanomaterials. In these revisions, outset is taken in the hypothesis that ecotoxicological test methods, developed for soluble chemicals, can be made applicable to nanomaterials. European Research Council project EnvNano—Environmental Effects and Risk Evaluation of Engineered, which ran from 2011 to 2016, took another outset by assuming that: “The behaviour of nanoparticles in suspension is fundamentally different from that of chemicals in solution”. The aim of this paper is to present the findings of the EnvNano project and through these provide the scientific background for specific recommendations on how ECHA guidance could be further improved. Key EnvNano findings such as the need to characterize dispersion and dissolution rates in stock and test media have partially been addressed in the updated guidance. However, it has to be made clear that multiple characterization methods have to be applied to describe state of dispersion and dissolution over time and for various test concentration. More detailed information is called for on the specific characterization methods and techniques available and their pros and cons. Based on findings in EnvNano, we recommend that existing algal tests are supplemented with tests where suspensions of nanomaterials are aged for 1–3 days for nanomaterials that dissolve in testing media. Likewise, for daphnia tests we suggest to supplement with tests where (a) exposure is shortened to a 3 h pulse exposure in daphnia toxicity tests with environmentally hazardous metal and metal oxide nanomaterials prone to dissolution; and (b) food abundance is three to five times higher than normal, respectively. We further suggest that the importance of considering the impact of shading in algal tests is made more detailed in the guidance and that it is specified that determination of uptake, depuration and trophic transfer of nanomaterials for each commercialized functionalization of the nanomaterials is required. Finally, as an outcome of the project a method for assessing the regulatory adequacy of ecotoxicological studies of nanomaterials is proposed.     

Hotspots and key periods of Greenland climate change during the past six decades

We investigated air temperature and pressure gradients and their trends for the period 1996–2014 in Greenland and compared these to other periods since 1958. Both latitudinal temperature and pressure gradients were strongest during winter. An overall temperature increase up to 0.15 °C year^?1 was observed for 1996–2014. The strongest warming happened during February at the West coast (up to 0.6 °C year^?1), weaker but consistent and significant warming occurred during summer months (up to 0.3 °C year^?1) both in West and East Greenland. Pressure trends on a monthly basis were mainly negative, but largely statistically non-significant. Compared with other time windows in the past six decades, the period 1996–2014 yielded an above-average warming trend. Northeast Greenland and the area around Zackenberg follow the general pattern but are on the lower boundary of observed significant trends in Greenland. We conclude that temperature-driven ecosystem changes as observed in Zackenberg may well be exceeded in other areas of Greenland.     

Improvements in Fluvial Stability Associated with Two‐Stage Ditch Construction in Mower County,Minnesota

Water quality and stream habitat in agricultural watersheds are under greater scrutiny as hydrologic pathways are altered to increase crop production. Agricultural drainage ditches function to remove water quickly from farmed landscapes. Conventional ditch designs lack the form and function of natural stream systems and tend to be unstable and provide inadequate habitat. In October of 2009, 1.89 km of a conventional drainage ditch in Mower County, Minnesota, was converted to an alternative system with a two‐stage channel to investigate the improvements in water quality, stability, and habitat. Longitudinal surveys show a 12‐fold increase in the pool‐riffle formation. Cross‐sectional surveys show an average increase in bankfull width of approximately 10% and may be associated to an increased frequency in large storm events. The average increase in bankfull depth was estimated as 18% but is largely influenced by pool formation. Rosgen Stability Analyses show the channel to be highly stable and the banks at a low risk of erosion. The average bankfull recurrence interval was estimated to be approximately 0.30 years. Overall, the two‐stage ditch design demonstrates an increase in fluvial stability, creating a more consistent sediment budget, and increasing the frequency of important instream habitat features, making this best management practice a viable option for addressing issues of erosion, sediment imbalance, and poor habitat in agricultural drainage systems.     

Development of a simple extraction cell with bi-directional continuous flow coupled on-line to ICP-MS for assessment of elemental associations in solid samples

A continuous-flow system comprising a novel, custom-built extraction module and hyphenated with inductively coupled plasma-mass spectrometric (ICP-MS) detection is proposed for assessing metal mobilities and geochemical associations in soil compartments as based on using the three step BCR (now the Measurements and Testing Programme of the European Commission) sequential extraction scheme. Employing a peristaltic pump as liquid driver, alternate directional flows of the extractants are used to overcome compression of the solid particles within the extraction unit to ensure a steady partitioning flow rate and thus to maintain constant operationally defined extraction conditions. The proposed flow set-up is proven to allow for trouble-free handling of soil samples up to 1 g and flow rates < or =10 mL min(-1). The miniaturized extraction system was coupled to ICP-MS through a flow injection interface in order to discretely introduce appropriate extract volumes to the detector at a given time and with a given dilution factor. The proposed hyphenated method demonstrates excellent performance for on-line monitoring of major and trace elements (Ca, Mn, Fe, Ni, Pb, Zn and Cd) released when applying the various extracting reagents as addressed in the BCR scheme, that is, 0.11 M CH(3)COOH, 0.1 NH(2)OH.HCl and 30% H(2)O(2), even when a well recognized matrix-sensitive detector, such as ICP-MS, is used. As a result of the enhanced temporal resolution of the ongoing extraction, insights into the breaking down of phases and into the kinetics of the metal release are obtained. With the simultaneous multielement detection capability of ICP-MS, the dynamic fractionation system presents itself as an efficient front-end for evaluation of actual elemental association by interelement comparison of metals leached concurrently during the extraction time. Thus, the intimate elemental association between Cd and Zn in contaminated soils could be assessed.     

Validation of CFD-model for hydrogen dispersion

To be able to perform proper consequence modelling as a part of a risk assessment, it is essential to be able to model the physical processes well. Simplified tools for dispersion and explosion predictions are generally not very useful. CFD tools have the potential to model the relevant physics and predict well, but without proper user guidelines based on extensive validation work, very mixed prediction capability can be expected. In this article, recent dispersion validation effort for the CFD tool FLACS–HYDROGEN is presented. A range of different experiments is simulated, including low-momentum releases in a garage, subsonic jets in a garage with stratification effects and subsequent slow diffusion, low momentum and subsonic horizontal jets influenced by buoyancy, and free jets from high-pressure vessels. LH₂ releases are also considered. Some of the simulations are performed as blind predictions.     

Annual population development and production by Calanus finmarchicus, C. glacialis and C. hyperboreus in Disko Bay, western Greenland

The populations of the copepod species Calanus finmarchicus, C. glacialis and C. hyperboreus were investigated in Disko Bay during a 14-month period in 1996-1997. The three species were predominant in the copepod community. The biomass reached a maximum at the beginning of June (127 mg C m^-3). From the end of July until the end of April the following year, the biomass was <1-6 mg C m^-3. All three species showed seasonal ontogenetic migration. The spring ascent for all three species was just prior to or in association with the break-up of sea ice and the development of the spring bloom, whereas descent occurred over a larger time span during summer. The main overwintering stages were CV for C. finmarchicus, CIV and CV for C. glacialis and C. hyperboreus. Peak abundance of juvenile copepodites, representing the new generation, was in August for C. finmarchicus, in July for C. glacialis and in May/June for C. hyperboreus. From the timing of reproduction and the population development, the life cycles were deduced to be 1 year for C. finmarchicus and at least 2 years for C. glacialis and C. hyperboreus. Secondary production and potential grazing impact of the Calanus community were estimated by two methods based on specific egg-production rates and temperature-dependent production. The Calanus community was not able to control the primary producers during the spring bloom but probably did during post-bloom. The estimates also indicated that grazing on ciliates and heterotrophic dinoflagellates contributes as an essential food source in the post-bloom period.