A comparative study of trace metals in male and female Caspian kutum (<Emphasis Type="Italic">Rutilus frisii kutum</Emphasis>) from the southern basin of Caspian Sea

This study focuses on the extent of zinc (Zn), copper (Cu), cadmium (Cd), cobalt (Co), manganese (Mn), lead (Pb), mercury (Hg), and arsenic (As) bioaccumulation in edible muscles of Caspian kutum (Rutilus frisii kutum), in both male and female sexes at Noor and Babolsar coastal regions from the southern basin of Caspian Sea. These values were compared with the WHO and the UNFAO safety standards regarding the amount of the abovementioned heavy metals in fish tissues (mg/kg ww). Results showed that the accumulation of these elements (except for Zn) was not significantly different between sexes of male and female in Babolsar coastal regions (P?>?0.05). In the other hand, accumulation of Hg and As at edible muscles of Caspian kutum has significant difference between two sexes of male and female in Noor coastal regions (P?<?0.05), the female had higher concentration than the male. Furthermore, it was not significantly correlated with sex and rivers in length and weight of fish (R ²?<?0.50; P?>?0.05). Based on the results, the concentration of heavy metals in the studied fish tissues proved to be significantly lower than international standards (P?<?0.05), so its consumption is not a threat to the health of consumers.     

Effect of PCM on temperature fluctuation during the door opening of a household refrigerator

Temperature fluctuation inside the cabinet of a household refrigerator significantly affects the quality of preserved food. Phase change material (PCM) is a latent heat storage system that can store and release the heat energy by changing its phase from liquid to solid and solid to liquid respectively. Therefore, use of PCM inside the refrigerator cabinet has the potential for minimizing the temperature fluctuation during the door opening and the power failure. However, very few studies in the literature were dedicated to investigating the role of PCM to reduce the temperature fluctuation. The aim of this work is to experimentally investigate the effects of PCM on temperature fluctuation inside the cabinet of a household refrigerator during the door opening and power failure. The results found that a significantly lower temperature fluctuation can be obtained using PCM. It was found that during the door opening condition the air temperature in the cabinet rose rapidly. However, when a PCM container was used, temperature variation was reduced to 3–5°C. During the power failure, the system with PCM maintained a lower temperature inside the storage chamber for a long period of time (about 2 hours). Moreover, the test results indicate that PCM maintains more stable temperature in the foodstuffs inside the refrigerator. This reduction of temperature fluctuation ultimately improves the quality of preserved food.     

The fate and transport of arsenic species in the aquatic ecosystem: a case study on Bestari Jaya,Peninsular Malaysia

The field of arsenic pollution research has grown rapidly in recent years. Arsenic constitutes a broad range of elements from the Earth’s crust and is released into the environment from both anthropogenic and natural sources due to its relative mobility under different redox conditions. The toxicity of arsenic is described in its inorganic form, as inorganic arsenic compounds can leach into different environments. Sampling was carried out in the Bestari Jaya catchment while using a land use map to locate the site, and experiments were conducted via sequential extraction and inductively coupled plasma optical emission spectroscopy to quantify proportions of arsenic in the sediment samples. The results show that metals in sediments of nonresidual fractions, which are more likely to be likely released into aquatic environments, are more plentiful than the residual sediment fractions. These findings support the mobility of heavy metals and especially arsenic through sediment layers, which can facilitate remediation in environments heavily polluted with heavy metals.     

Evaluation of the interaction between soil and antibiotics

The aim of this study was to investigate the occurrence of tetracycline and sulfonamide antibiotics in 13 different soil samples collected from agricultural fields. As well as the antibiotic analysis 18 different physicochemical properties of the soil samples were determined in order to establish a relationship between the recovery rates of antibiotics from the samples and the characteristics of the samples that provide critical information for the reliability of an applied antibiotic analysis method. While the concentrations of tetracyclines were 0.025–0.105 mg kg^?1 sulfonamide antibiotics were not detected in any investigated soil samples. The mean recovery rates of tetracyclines and sulfonamides were 84.57 ± 14.92% and 65.88 ± 8.56%, respectively. Although, the organic carbon contents and cation exchange capacities of the soil samples exhibited a great variation the results of multivariate statistical analysis indicated that the metal content of soils was the major factor significantly influenced the recovery rates of the antibiotics. The sulfonamide recovery rates were positively influenced by the calcium and magnesium amounts in the soil samples, whereas tetracycline recovery rates were markedly diminished by increasing the amount of these polyvalent metals.     

Interconversions and toxicity changes in hexachlorocyclohexane isomers on dispersion in water

Abstract

Studies on the transformations of hexachlorocyclohexane isomers, α‐, β‐, γ‐ and δ‐, in aqueous solution were carried out at 25 ± 1°C over a period of four weeks. Gas liquid chromatographic technique was used for analysis. The results indicated a loss as well as interconversion of all the four isomers with time. The resulting changes in toxicity of the aqueous solution were studied against Drosophila using topical application. Toxicity studies with aqueous solution of technical hexachlorocyclohexane were simultaneously carried out for comparison. Toxicity of the aqueous solutions of α‐, β‐, and δ ‐isomers showed an increase while that of the γ‐isomer decreased significantly during the four week experimental period. Aqueous solution of technical HCH was equally toxic as that of the γ‐isomer initially and did not show much decrease in its toxicity at the end. Changes in toxicity of the individual isomer solutions were considered to be due, in part, to interconversions of HCH isomers.     

Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.     

基于BP神经网络的盐碱土盐分反演模型研究

土壤盐渍化是干旱,半干旱农业区主要的土地退化问题,像沙漠化一样也是当今世界重要的环境和社会经济问题.以新疆渭干河-库车河三角洲绿洲作为研究区,利用实测的盐碱土光谱数据和地下水埋深、地下水矿化度和表层土壤矿化度等因子构建了基于BP神经网络的盐碱土盐分反演模型.该模型的最终输出结果与期望得到的结果相差不大,在输出的误差中,...     

Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology

In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants for the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.     

Performance and emission study of biodiesel from leather industry pre-fleshings

The possible use of pre-fleshing wastes from tanneries in the production of biodiesel fuel was examimed in our previous study in 2005. In this study, engine performance and emission values of biodiesel obtained from these wastes have been investigated and compared to petrodiesel fuel. The test results demonstrated that although the wheel force and power of biodiesel fuel is slightly lower than petrodiesel and the acceleration periods are accordingly longer, the emission values of hydrocarbons and particulate matter were found to be considerably lower with biodiesel. Thus, it has been shown that a waste byproduct can be utilized in the production of an environmentally friendly fuel, which can be used in some diesel engines without a need for major adjustment, providing economic and ecological benefits.