Modeling rhizofiltration: heavy-metal uptake by plant roots

The discovery of phytoaccumulation potential of plant species has led to its application for remediation of heavy-metal-contaminated soil and wastewater, which is termed as phytoextraction/rhizofiltration. For prediction, analysis, planning and cost-effective design of such systems, mathematical models not only are used as a screening tool but also provide optimal parameters like harvesting time, irrigation schedule, etc. Several laboratory and field scale studies have been carried out in the past, and mathematical expressions have been developed by various researchers for different phenomena like metal adsorption in soil, plant root growth with time, moisture and metal uptake by plant root, moisture movement in unsaturated zone, soil moisture relationship, etc. The complete design of any such phytoremediation program would require the knowledge of behavior of heavy-metal movement in soil, water and plant root system. In this paper, a model for simulating heavy-metal dynamics in soil, water and plant root system is developed and discussed. The governing non-linear partial differential equation is solved numerically by implicit finite difference method using Picard's iterative technique, and the formulation has been illustrated using a characteristic example. The source code is written in MATLAB.     

Modelling Water Blending—Sensitivity of Optimal Policies

Water blending is modelled as a combination of a linear program and a stochastic dynamic program. Optimal policies are found for linear and integer-linear formulations using both an expected monetary value and conditional value-at-risk criterion. The sensitivity of these solutions to the discretisation over volume and over time is investigated.     

Kinetics of sorption of lead on bed sediments of River Hindon, India

A number of low cost waste sorbent have been used for removal of heavy metals, however, few studies have been carried out on the sorption process on riverbed sediments in their natural state of occurrence. Stream sediments adsorb certain solutes from streams, thereby significantly changing the solute composition, but little is known about quantitatively describing sorption phenomena and rates of these processes. In the present investigation, sorption of lead ions on river bed sediments of river Hindon, a tributary of river Yamuna, India has been studied to demonstrate the role of bed sediments in controlling metal pollution. The effect of various operating variables, viz., initial concentration, solution pH, sediment dose, contact time and particle size has been studied. The sorption of lead ions increased with respect to pH and sorbent dose and decreased with sorbent particle size. Two important geochemical phases, iron and manganese oxide, also play important role in the sorption process. The sorption data were analysed using Langmuir and Freundlich isotherm models to determine the mechanistic parameters related to the sorption process. Further, although lead ions have more affinity for the fine fraction of the sediment, but the overall contribution of coarser fraction to sorption is more as compared to clay and silt fraction. The kinetic data suggest that the sorption of lead on bed sediments is an endothermic process, which is spontaneous at low temperature. The uptake of lead is controlled by both bulk and intraparticle diffusion mechanism.     

Cover estimation versus density counting in species-rich pasture under different grazing intensities

Two methods for monitoring of grassland vegetation were compared: visual estimation of plant cover (C) and plant densities counting (D). C and D were performed in monthly intervals for three vegetation growing seasons after imposing different grazing regimes on abandoned grassland in 1998. Species scores obtained from paired redundancy analyses (RDA) of C and D data were compared and Spearman's rank correlations were used to show if the two methods give comparable results. Results of C and D were highly correlated in the first two growing seasons only. In the third season, correlation was substantially lower as the sward structure was more heterogeneous due to creation of differently defoliated patches especially under extensive grazing. Presence of the same plant species with different habit in frequently and in infrequently grazed patches, reduced significance of Spearman's rank correlations. Cover estimation can fully substitute plant density counting in grassland with lower proportion of frequently and infrequently grazed patches only, but caution should be used when comparing different management regimes in long term analyses.     

Multivariate statistical study of seasonal variation of BTEX in the surface water of Savitri River

Volatile organic compounds (VOCs) analysis was carried out for the surface water of the Savitri river during the period of June 2005 to June 2007. BTEX compounds (Benzene, Toluene, Xylene & Ethyl benzene) were analyzed by using micro extraction technique (Purge & Trap). Concentrations of these BTEX compounds were ranging from 0.1 to 1.5 ppm during sampling period. Higher concentrations of BTEX were found at sampling location VI. Concentration of ethyl benzene was very low as compare to other compounds. However, the concentration of benzene was very high. Seasonal variations in conc. of BTEX compounds were observed and higher concentration was detected during the summer season. Salting-out effect had given higher quantification values. In PCA and PFA, the component loading for all the variables are positively correlated. Death of fishes was observed in the river that is indication of severe pollution problem.     

Identification of air pollutant sampling period using horizontal dilution potential

A new model is proposed for estimating horizontal dilution potential of an area using wind data. The mean wind speed and wind direction variation are used as a measure of linear and angular spread of pollutant in the atmosphere. The methodology is applied to monitored hourly wind data for each month of 1 year for wind data collected at Vadodara, Gujarat and monthly dilution potential is estimated. It is found that there is a gradual variation of horizontal dilution potential over a year with limited dilution during post monsoon period i.e., October and November and a high dilution in pre monsoon period i.e., May and June. This information can be used to design air quality sampling network and duration of sampling for source apportionment study. Air pollutant sampling during high dilution period can be carried out for identifying urban and rural dust and wind blown dust from mining activity. Air pollutant sampling during low dilution period can be carried out for capturing large amount of particulate matter from anthropogenic sources like elevated stack of furnace.     

Identification and quantification of microcystins from a Nostoc muscorum bloom occurring in Oukaïmeden River (High-Atlas mountains of Marrakech, Morocco)

Atmospheric BTEX [benzene, toluene, ethylbenzene, o-xylene and (m + p)-xylene] concentrations have been determined in the Naples metropolitan area (NMA) and in two suburban areas located on the north within about 25 km, during 2006. The pollutants were collected by passive samplers (24-h samplings), and analysed by GC-MS. In all the areas analysed the average atmospheric benzene concentrations were higher than the limit value fixed by the European Union for 2010 and in NMA the average concentration (9.8 microg m(-3)) also exceeded the limit fixed for 2006. High linear correlation coefficients between the average daily concentrations of the different BTEX are indicative of a single major source, most likely the vehicular traffic. The temporal and spatial distribution of BTEX relative concentrations suggest that massive emissions in NMA negatively affect the quality of the air in northern suburban areas, prevalently during the hottest months of the year, probably due to transport by local seasonal winds. The ratios between BTEX daily concentrations showed a clear dependence on the intensity of solar actinic flow, indicating a major role of photochemical processes in the air cleaning from these volatile organic pollutants.     

Assessing benthic community condition in Chesapeake Bay: does the use of different benthic indices matter?

Federal and state environmental agencies conduct several programs to characterize the environmental condition of Chesapeake Bay. These programs use different benthic indices and survey designs, and have produced assessments that differ in the estimate of the extent of benthic community degradation in Chesapeake Bay. Provided that the survey designs are unbiased, differences may exist in the ability of these indices to identify environmental degradation. In this study we compared the results of three indices calculated on the same data, and the assessments of two programs: the Chesapeake Bay Program and the Mid-Atlantic Integrated Assessment (MAIA). We examined the level of agreement of index results using site-based measures of agreement, evaluated sampling designs and statistical estimation methods, and tested for significant differences in assessments. Comparison of ratings of individual sites was done within separate categories of water and sediment quality to identify which indices summarize best pollution problems in Chesapeake Bay. The use of different benthic indices by these programs produced assessments that differed significantly in the estimate of degradation. A larger fraction of poor sites was classified as good by the Environmental Monitoring and Assessment Program’s Virginian Province and MAIA benthic indices compared to the Chesapeake Bay benthic index of biotic integrity, although overall classification efficiencies were similar for all indices. Differences in survey design also contributed to differences in assessments. The relative difference between the indices remained the same when they were applied to an independent dataset, suggesting that the indices can be calibrated to produce consistent results.     

Leaching behaviour of different scrap materials at recovery and recycling companies: Full-, pilot- and lab-scale investigation

Scrap material recovery and recycling companies are confronted with waste water that has a highly fluctuating flow rate and composition. Common pollutants, such as COD, nutrients and suspended solids, potentially toxic metals, polyaromatic hydrocarbons and poly chlorinated biphenyls can exceed the discharge limits. An analysis of the leaching behaviour of different scrap materials and scrap yard sweepings was performed at full-scale, pilot-scale and lab-scale in order to find possible preventive solutions for this waste water problem. The results of these leaching tests (with concentrations that frequently exceeded the Flemish discharge limits) showed the importance of regular sweeping campaigns at the company, leak proof or covered storage of specific scrap materials and oil/water separation on particular leachates. The particulate versus dissolved fraction was also studied for the pollutants. For example, up to 98% of the polyaromatic hydrocarbons, poly chlorinated biphenyls and some metals were in the particulate form. This confirms the (potential) applicability of sedimentation and filtration techniques for the treatment of the majority of the leachates, and as such the rainwater run-off as a whole.     

Characterization of EVA/PLA Blends When Exposed to Different Environments

EVA/PLA blends compatibilized with EVA-g-PLA grafted copolymers synthesized by reactive extrusion, through transesterification reaction between ethylene-vinyl-acetate (EVA) and polylactide (PLA) using titanium propoxide (Ti(OPr)₄) as catalyst, were characterized when exposed to different environments. Stability to UV radiation was assessed exposing the samples to a Xenon lamp, which simulates the sun UV spectrum and the biodegradability was evaluated by biochemical oxygen demand (BOD) in a closed respirometer. Exposed samples were removed periodically and analyzed by several analytical techniques, such as, FTIR, DSC, rheology and tensile tests. The results obtained evidenced that UV radiation induces structural modifications, which affect substantially rheological and mechanical properties. Moreover, the blend with higher amount of copolymer exhibits lower photo durability and greater biodegradability. From the environmental point of view, these new materials are very promising for application with short lifetime, like packaging.