Effects of induced paralysis on hemocytes and tissues of the giant lions-paw scallop by paralyzing shellfish poison

In general, bivalves are not affected by exposure to toxic dinoflagellates that produce paralyzing shellfish poisons (PSP). After injection with PSP extracted from the Gymnodinium catenatum, Nodipecten subnodosus is paralyzed, indicating that PSP provokes effects similar to what is observed in vertebrates, including paralysis and metabolic stress. To investigate the processes involved in poisoning by PSP, lions-paw scallops were injected with gonyautoxin (GTX) 2/3 epimers in the adductor muscle. Mild doses provoked adductor muscle contractions and paralysis, mantle retraction, and incapacity of shell closure, but scallops gradually recovered in a clear, dose-time recovery pattern. With high doses of GTX 2/3, scallops were permanently paralyzed, and hemocytes in hemolymph were reduced. Surprisingly, under these conditions, scallops continued normal feeding and did not show any microscopic defect in intestine or gills, but hemocytes infiltrated the adductor muscle and abnormal vitellogenesis and mantle melanization occurred. Paralysis stress was accompanied by negative scallop responses, based on visible effects, generation of nitric oxide, lipid peroxidation, and changes in antioxidant and hydrolytic enzymes in hemocytes and tissues. These data can be used to understand potential side effects of PSP in bivalves.     

Characterization and Properties of Hydrophilic Cellulose Acetate Propionate Derivative

The chemical modification of Acrylamidomethyl Cellulose Acetate Propionate (AMCAP) was carried out by radical addition of acrylic acid. The structural modification was confirmed with the aid of FTIR, MS and NMR techniques. Thermal properties of hydrophilic cellulose derivative (AMCAP–H₂O₂) such as glass transition (T_g 153 °C) and thermal stability (372.7 °C) were determined by DSC and TGA techniques, respectively. These thermal properties confirmed the introduction of carboxylic groups into AMCAP structure, which causes an impact in their properties. The AMCAP–H₂O₂ shows minor contact angle compared to AMCAP, giving a more hydrophilic characteristic, due to acrylic acid addition into the side chains of AMCAP polymer.     

Transfer of pesticides to the brew during mate drinking process and their relationship with physicochemical properties

In order to evaluate the extraction of pesticide residues that are transferred to the brew during mate drinking process of P.U.1 yerba mate leaves (Ilex paraguariensis), a special device to simulate the way in which mate is drunk in Uruguay was developed. The transfer to the brew of 12 organophosphates, 5 synthethic pyrethroids and one organochlorine pesticide from spiked samples was studied. The relationship between the transfer data thus obtained and physicochemical properties like water solubility (Ws), octanol-water coefficient (Kow) and Henry's constant (H) was evaluated. The extractability of the pesticide residues from yerba mate can be correlated with log Ws and log Kow. These transfer values allowed the calculation of ARLs (acceptable residue level) for the pesticides following Food and Agriculture Organization (FAO), World Health Organizaion (WHO) guidelines. These results can help the future establishment of maximum residue levels (MRLs)     

Evaluation of landfill leachate treatment by advanced oxidative process by Fenton’s reagent combined with membrane separation system

A high content of refractory organic matter, ammonia and toxic compounds is characteristic of landfill leachate. Advanced oxidative processes (AOPs) are an attractive alternative for landfill leachate treatment. However, when applied as a unique process treatment, they do not provide a complete solution for the effluent treatment. Combining AOP with a membrane separation process (MSP) presents a number of benefits and provides an adequate solution for this problem. With this in mind, the present work aims to evaluate, using a bench scale, leachate treatability through AOP by Fenton’s reagent (AOP/Fenton) combined with microfiltration (MF) and nanofiltration (NF). A high efficient removal of COD (63%), true color (76%) and humic substances (50%) was observed during AOP/Fenton under optimized conditions (1.7 g H₂O₂/g COD_{raw leachate}; FeSO₄·7H₂O:H₂O₂ = 1:5.3; pH = 3.8; reaction conditions = 115 rpm/28 min). According to the evaluated parameters, MSP presented an efficient complementary treatment, in which the integrity of the stages was sufficient for reaching regulatory levels in the effluent (Deliberação Normativa Conjunta COPAM/CERH-MG N^o. 1, May 5, 2008).     

Limitations in the determination of maximum residue limits and highest residues of pesticides: Part I

The pesticide usages are controlled by comparing residue concentrations in treated commodities to legally permitted maximum levels (MRLs) determined based on supervised trials designed to reflect likely maximum residues occurring in practice following authorised use. The number of trials available may significantly affect the accuracy of estimated maximum residues. We conducted a study with synthetic lognormal distributions with mean of 1 and standard deviations of 0.8 and 1.0, which reflect the residue distributions observed in practice. The likely residues in samples were modelled by drawing random samples of size 3, 5, 10 and 25 from the synthetic populations. The results indicate that the estimations of highest residues (HR), used for calculation of short-term intake, and the MRLs, serving as legal limits, are very uncertain based on 3–5 trials indicated by the calculated HR_0.975/HR_0.025 and MRL_0.975/MRL_0.025 ratios of 12 and 9, and 13 and 10, respectively, which question the suitability of such trials for the intended purpose. As the 95% range of HR and MRL rapidly decreases with number of trials, ideally ≥15 but minimum 6–8 trials should be used for estimation of HR and MRL according to the current typical practice of Codex Alimentarius.     

Effect of feeding strategy and COD/sulfate ratio on the removal of sulfate in an AnSBBR with recirculation of the liquid phase

The objective of this work was to analyze the effect of the interaction between feeding strategy and COD/sulfate ratio on the removal efficiency of sulfate and organic matter from a synthetic wastewater. An anaerobic sequencing batch reactor with recirculation of the liquid phase and containing immobilized biomass on polyurethane foam (AnSBBR) was used. The AnSBBR with a total volume of 3.7 L, treated 2.0 L synthetic wastewater in 8-h cycles at 30 ± 1 °C and was inoculated with anaerobic biomass from a UASB. Two feeding strategies were assessed: (a) batch and (b) batch followed by fed-batch. In strategy (a) the reactor was fed in 10 min with 2 L wastewater containing sulfate and carbon sources. In strategy (b) 1.2 L wastewater (containing only the sulfate source) was fed during the first 10 min of the cycle and the remaining 0.8 L (containing only the carbon source) in 240 min. The COD/sulfate ratios assessed were 1 and 3. Based on these values and on the concentrations of organic matter (0.5–11.25 gCOD/L) and sulfate (0.5 and 2.5 gSO₄^2?/L), the sulfate and organic matter loading rates applied equaled 1.5 and 4.5 gSO₄^2?/L d for sulfate and 1.5, 4.5 and 13.5 gCOD/L d for organic matter. After stabilization of the system time profiles were run of monitored parameters (COD, sulfate, sulfide and sulfite). In general, the reactor showed to be robust for use in the anaerobic treatment of wastewaters containing sulfate. Gradual feeding (strategy b) of the carbon source favored sulfate reduction, resulting in sulfate removal efficiencies of 84–98% and organic matter removal efficiencies of 48–95%. The best results were observed under COD/sulfate ratio equal to 1 (loading rates of 1.5 and 4.5 gSO₄^2?/L d for sulfate, and 1.5 and 4.5 gCOD/L d for organic matter). When COD/sulfate ratio was 3 (loading rates of 1.5 and 4.5 gSO₄^2?/L d for sulfate, and 4.5 and 13.5 gCOD/L d for organic matter) the effect of feed mode became less significant. These results show that the strategy batch followed by fed-batch is more advantageous for COD/sulfate ratios near the stoichiometric value (0.67) and higher organic matter and sulfate concentrations.     

Proposal for selective differentiating of nerve agent G and V type with utilisation of modified Ellman’s method

We studied issues of organophosphorus agents’ analysis. Immobilised enzyme–inhibitors complexes (e.g. acetylcholinesterase-organophosphate nerve agent) were studied with modified Ellman’s biochemical method utilised for assessment of acetylcholinesterase activity. Biochemical reactions are widespread and they are the most frequent used analytical methods for determination of nerve agents. This modified method is based on the nucleophilic reactions of mono- and bispyridinium aldoximes of a type 2-PAM, MMB-4 and HI-6, their homologues and isomers with enzyme–inhibitor complexes. The procedure for a gradual analysis of G and V type, Sarin, Cyclohexylsarin, Soman, Tabun, agent VX and R-33 was proposed in terms of studied nucleophilic substitution reactions quantification results. This method enables selective determination of these chemical warfare agents. A gradual analysis was evaluated by statistic method of probabilistic calculus. This type of analysis can be used for assessment of acetylcholinesterase inhibitors in very low concentrations close to hygienic limits.