Environmental monitoring of water resources around a municipal landfill of the Rio Grande do Sul state,Brazil

Environmental Science and Pollution Research - In Brazil, landfills are commonly used as a method for the final disposal of waste that is compliant with the legislation. This technique, however,...     

Effect of impeller type and agitation on the performance of pilot scale ASBR and AnSBBR applied to sanitary wastewater treatment

The objective of this work was to assess the effect of agitation rate and impeller type in two mechanically stirred sequencing batch reactors: one containing granulated biomass (denominated ASBR) and the other immobilized biomass on polyurethane foam (denominated AnSBBR). Each configuration, with total volume of 1 m³, treated 0.65 m³ sanitary wastewater at ambient temperature in 8-h cycles. Three impeller types were assessed for each reactor configuration: flat-blade turbine impeller, 45°-inclined-blade turbine impeller and helix impeller, as well as two agitation rates: 40 and 80 rpm, resulting in a combination of six experimental conditions. In addition, the ASBR was also operated at 20 rpm with a flat-blade turbine impeller and the AnSBBR was operated with a draft tube and helix impeller at 80 and 120 rpm. To quantify how impeller type and agitation rate relate to substrate consumption rate, results obtained during monitoring at the end of the cycle, as well as the time profiles during a cycle were analyzed. Increasing agitation rate from 40 rpm to 80 rpm in the AnSBBR improved substrate consumption rate whereas in the ASBR this increase destabilized the system, likely due to granule rupture caused by the higher agitation. The AnSBBR showed highest solids and substrate removal, highest kinetic constant and highest alkalinity production when using a helix impeller, 80 rpm, and no draft tube. The best condition for the ASBR was achieved with a flat-blade turbine impeller at 20 rpm. The presence of the draft tube in the AnSBBR did not show significant improvement in reactor efficiency. Furthermore, power consumption studies in these pilot scale reactors showed that power transfer required to improve mass transfer might be technically and economically feasible.     

Baseline mercury and zinc concentrations in terrestrial and coastal organisms of Admiralty Bay, Antarctica

This paper provides the first quantitative information on mercury in soil, coastal sediment, and in characteristic organisms of terrestrial and shallow coastal marine ecosystems from Admiralty Bay (King George Island, Antarctica). As expected for a remote area, mercury content is low in abiotic components of the ecosystem, and probably similar to natural levels. Mercury also occurs in very low concentrations in the vegetation, invertebrates and fish. These low mercury levels may be due to sulphide formation in reducing sediments of this environment. Higher concentrations of mercury occurred in bird feathers and mammal hair, indicating biomagnification. This was not found for Zinc. These results may be useful as a reference background to detect future inputs of trace elements in this remote area of the earth. Terrestrial vegetation and bird feathers are suggested as target regional biomonitors.     

Comparison of European national legislation efficiency on the reduction of air pollutant emissions

Since 1995, the Institute for Environment and Development in Portugal has obtained >300 stack samples from various point sources of Portuguese industries. A coherent database was made with the collected results. The limit values fixed by several European legal documents consulted, Portuguese, Spanish, French, Italian, and Dutch emission legislation, were applied to the Institute for Environment and Development stack sampling inventory (from 1995 to 2000) to evaluate the efficiency of these standards in promoting the control and reduction of atmospheric pollutants emissions, especially regarding nitrogen oxides, sulfur dioxide, and particulate matter. The conclusion was that the original Portuguese legislation was not restrictive enough and not very efficient regarding emissions reduction. In contrast, the Dutch and Italian legislations are quite restrictive but very efficient concerning emission control for the three pollutants analyzed. One of the outcomes of this study was the publication of a new law in Portugal regulating the emissions of atmospheric pollutants. The strategy of this emissions control law follows the conclusions found in this study including the concept of a mass flow threshold and different approaches depending on source dimension.     

Ecodesign of automotive components making use of natural jute fiber composites

Nowadays, the world faces unprecedented challenges in social, environmental and economical dimensions, in which the industrial design has showed an important contribution with solutions that provide positive answers regarding these problems. In particular, due to its relevance, the automotive industry confronts a moment of crises, and based on the ecodesign of products it has been transforming the challenges in opportunities. In this context, the use of natural fiber composites, produced in developing countries, have presented several social, environmental and economical advantages to design “green” automotive components. Thus, this work through LCA method demonstrates the possibility to use natural fibers through a case study design which investigates the environmental improvements related to the replacement of glass fibers for natural jute fibers, to produce a structural frontal bonnet of an off-road vehicle (Buggy). Results pointed out the advantages of applying jute fiber composites in Buggy enclosures.     

Does leaf flushing in the dry season affect leaf traits and herbivory in a tropical dry forest?

We report a small hawk-like diurnal bird from the early Oligocene (30–31 million years ago) of Poland. Aviraptor longicrus, n. gen. et sp. is of a size comparable with the smallest extant Accipitridae. The new species is characterized by very long legs, which, together with the small size, suggest an avivorous (bird-eating) feeding behavior. Overall, the new species resembles extant sparrowhawks (Accipiter spp.) in the length proportions of the major limb bones, even though some features indicate that it convergently acquired an Accipiter-like morphology. Most specialized avivores amongst extant accipitrids belong to the taxon Accipiter and predominantly predate small forest passerines; the smallest Accipiter species also hunts hummingbirds. Occurrence of a possibly avivorous raptor in the early Oligocene of Europe is particularly notable because A. longicrus coexisted with the earliest Northern Hemispheric passerines and modern-type hummingbirds. We therefore hypothesize that the diversification of these birds towards the early Oligocene may have triggered the evolution of small-sized avivorous raptors, and the new fossil may exemplify one of the earliest examples of avian predator/prey coevolution.

     

Toward an integrative approach of the industrial risk management process in France

Management in the field of environmental protection and risk prevention has evolved to the increasing participation of all stakeholders in the decision-making process. It certainly results from the development of the Information society and the global increase of knowledge of the population, combined with the concerns of the populations related to a sustainable development of our civilisation. Our ‘risk society’, following the big industrial disasters (Flixborough,Tchernobyl, Bhopal, Challenger, and more recently Toulouse), has also developed a cautious attitude towards the role of the expertise when it comes to assessing risks, along with a question of the ability of science to give definite answers.

This has lead in particular to the adoption of the Aarhus convention in 1998 and the evolution of several regulations in the developed countries. For example, in France the new law no. 2003–699 of 30 July 2003 about the ‘prevention of the technological and natural risks and to the compensation for the damages’ has introduced an important innovation into the process of technological risks prevention.

This law has enabled the involvement of the stakeholders in the decision-making process related to risk prevention and has urged the development of specific tools to deal with the complexity of risk management issues, in particular for those related to land-use planning.

As technical support to decision-makers in risk management from both public and private sectors, INERIS has played an important role for the evolution of the French risk management system.

This paper describes an analysis on the difficulty to control major accident hazards in an evolving context where the industrial systems becomes more and more complex and where the expectations of the civil society has increased. Then, the authors describe how an integrated vision for industrial risk management has emerged in France and is being implemented in a new law adopted after the Toulouse disaster.     

Removal of Hg2+ ions by adsorption using (TiO2@MnO2)-NPs nanocomposite

Journal of Material Cycles and Waste Management - Waste water contaminated with inorganic mercury is considered a serious environmental problem, mainly due to the hazardous effects this contaminant...     

Heterogeneous alternative catalysts: A bibliometric and systematic evaluation of their application in solar photocatalytic processes

The present study sought to objectively demonstrate how a researcher can, in a structured way, select relevant articles about alternative heterogeneous catalysts in photocatalytic processes. Therefore, the ProKnow-C (Knowledge Development Process – Constructivist) method was used to systematize the results found, with the application bibliometric and systematic analysis techniques for the evaluation of the results. The search string adopted as criteria was: solar photocatalysis AND heterogeneous catalysts OR alternative catalysts AND effluents. The databases were Web of Science, Science Direct and Scopus. The final bibliographic portfolio obtained for the research theme was made up of 19 articles. It was possible to verify advances in the number of publications on the theme over the evaluated period, with the Journal of Photochemistry and Photobiology A: Chemistry standing out in the final portfolio. Evaluating each article in the portfolio individually, it was possible to verify that most studies use combinations of catalysts already reported to create an alternative material to those already investigated in the literature. Those that use waste as catalysts chose to source this material from treatment plants and the steel industry. Around 58% of the papers used hydrogen peroxide in their processes, while 42% chose not to use it. Finally, approximately 63% of the papers in the portfolio used synthetic effluent in their processes, while the rest (37% of the research) chose to use real effluent. The results obtained in this research by applying the method can contribute to studies related to heterogeneous photocatalysis by alternative means over the years.     

Determination of toxic metals in leather by wavelength dispersive X-ray fluorescence (WDXRF) and inductively coupled plasma optical emission spectrometry (ICP OES) with emphasis on chromium

The tanning industry is one of the largest environmental polluters due to high generation waste in all production processes, but the tanning is particularly worrisome due to the use of significant amounts of chromium. Cr is an element potentially toxic to both health and the environment, depending on the concentration and the oxidation state. Cr(VI) can come in contact with human skin when using leather goods, which can cause allergies and dermatitis, besides being carcinogenic. Considering that approximately 90% of the world production of leather is performed with Cr salts, the determination of this element in leather is necessary to avoid exposure to the risks that the element can provide. The main goal of this study was the development of an alternative analytical method for the determination of Cr in leathers (ovine and bovine leather tanned with Cr and vegetable tannin) using wavelength dispersive X-ray fluorescence (WDXRF) for direct solid analysis. Besides performing analysis of the chemical composition and determination of Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Ni, Pb, Sb, Sr, Ti, and Zn in leather by inductively coupled plasma optical emission spectrometry (ICP OES). Principal component analysis (PCA) was also used in the evaluation of the WDXRF and ICP OES data sets. WDXRF calibration models for Cr presented satisfactory figures of merit and the analysis of the leathers revealed an alarming concentration of total Cr in the samples reaching 21,353 mg kg^?1.