Total soil available nitrogen under perennial grasses after burning and defoliation

Total soil available nitrogen concentrations (NO^–3 + NH ₄ ⁺ ) were determined underneath plants of the more-competitive Poa ligularis, mid-competitive Nassella tenuis and the less-competitive Amelichloa ambigua exposed to various combinations of controlled burning and defoliation treatments. Defoliations were at the vegetative (V), internode elongation (E) or both developmental morphology stages (V + E) during two years after burning in northeastern Patagonia, Argentina. Hypotheses were that (1) concentrations of total soil available nitrogen after burning are greater underneath burned than unburned plants. With time, these differences, however, will gradually disappear; (2) greater total soil available nitrogen concentrations are underneath plants of the more- than less-competitive perennial grasses; and (3) total soil available nitrogen is similar or lower underneath plants defoliated at the various developmental morphology stages in all three study species than on untreated controls at the end of the study. Concentration of total soil available nitrogen increased 35% (p < 0.05) on average after the first six months from burning in comparison to control plants. However, these differences disappeared (p > 0.05) towards the end of the first study year. Total soil available nitrogen concentrations were at least 10% lower underneath the less competitive N. tenuis and A. ambigua than the more competitive P. ligularis on average for all treatments, although differences were not significant (p > 0.05) most of the times. Defoliation had practically no effect on the concentration of total soil available nitrogen. Rather than any treatment effect, total soil nitrogen concentrations were determined by their temporal dynamics in the control and after the experimental fire treatments.     

Protection strategies for drinking groundwater sources in small Quebec municipalities

Awareness of groundwater protection has increased substantially in recent decades. In the Province of Quebec, Canada, the Groundwater Catchment Regulation (GWCR) was promulgated in 2002 to protect water quality in public wells. The goal of the present study was to document groundwater protection in the context of emerging regulations and identify factors explaining the propensity of municipalities applying protection strategies. Two types of information were used in this study: data from a questionnaire-based survey conducted among 665 municipalities in the Province of Quebec and complementary information gathered from various sources. Data from the survey revealed that fewer than half of the municipalities have been able to comply with the GWCR, mainly because of financial limitations. Also, close to half of the municipalities have either identified or are expecting land use conflicts to arise between protection areas required by the GWCR and other land usage, with agriculture being the main conflicting activity. Multivariate logistic regression models served to identify factors explaining the likelihood of municipalities to take groundwater protection measures. Those factors were municipality revenue, history of water contamination in distribution systems, land use near wellheads, location of municipalities within a provincial priority watershed and the importance of groundwater use in a region. Results of the study may prove helpful for government authorities in better understanding the groundwater protection issue and in implementing strategies that improve the ability of municipalities to protect groundwater.     

Modeling riverine nutrient transport to the Baltic Sea: a large-scale approach

We developed for the first time a catchment model simulating simultaneously the nutrient land-sea fluxes from all 105 major watersheds within the Baltic Sea drainage area. A consistent modeling approach to all these major watersheds, i.e., a consistent handling of water fluxes (hydrological simulations) and loading functions (emission data), will facilitate a comparison of riverine nutrient transport between Baltic Sea subbasins that differ substantially. Hot spots of riverine emissions, such as from the rivers Vistula, Oder, and Daugava or from the Danish coast, can be easily demonstrated and the comparison between these hot spots, and the relatively unperturbed rivers in the northern catchments show decisionmakers where remedial actions are most effective to improve the environmental state of the Baltic Sea, and, secondly, what percentage reduction of riverine nutrient loads is possible. The relative difference between measured and simulated fluxes during the validation period was generally small. The cumulative deviation (i.e., relative bias) [Sigma(Simulated - Measured)/Sigma Measured x 100 (%)] from monitored water and nutrient fluxes amounted to +8.2% for runoff, to -2.4% for dissolved inorganic nitrogen, to +5.1% for total nitrogen, to +13% for dissolved inorganic phosphorus and to +19% for total phosphorus. Moreover, the model suggests that point sources for total phosphorus compiled by existing pollution load compilations are underestimated because of inconsistencies in calculating effluent loads from municipalities.     

Tolerance of transgenic canola plants (Brassica napus) amended with plant growth-promoting bacteria to flooding stress at a metal-contaminated field site

The growth of transgenic canola (Brassica napus) expressing a gene for the enzyme 1-aminocyclopropane-1-carboxylate (ACC) deaminase was compared to non-transformed canola exposed to flooding and elevated soil Ni concentration, in situ. In addition, the ability of the plant growth-promoting bacterium Pseudomonas putida UW4, which also expresses ACC deaminase, to facilitate the growth of non-transformed and transgenic canola under the above mentioned conditions was examined. Transgenic canola and/or canola treated with P. putida UW4 had greater shoot biomass compared to non-transformed canola under low flood-stress conditions. Under high flood-stress conditions, shoot biomass was reduced and Ni accumulation was increased in all instances relative to low flood-stress conditions. This is the first field study to document the increase in plant tolerance utilizing transgenic plants and plant growth-promoting bacteria exposed to multiple stressors.     

Benthic invertebrates structure in wetlands of a tributary of the middle Parana River (Argentina) affected by hydrologic and anthropogenic disturbances

The present study was aimed at analyzing chromium concentrations in water column and bottom sediments in the main channel of Northern Salado River (tributary of Middle Parana River) and its floodplain. The main changes caused by human activities and hydrological disturbances on benthic invertebrate structure were also analyzed. Sediment concentrations of the reference area varied between 44.2 and 97.1 microg Crg(-1) (dw), and in the impacted zone, between 85.5 and 209 microg Cr g(-1) (dw) reaching the highest values in the wetland floodplain. Alfa, beta and gamma diversities in the reference section have been 33, 9 and 66 species, and in the disturbed section, they have been 37, 8.33 and 74 species, respectively The species dominant in the disturbed habitats were characterized by a small body size and short life cycles, as the species of olig chaetes Naidinae. The extreme flooding produced a rejuvenation of the area with the consequent physical re-structuration produced by flooding, showing: a marked decrease in chromium levels in sediments and in organic matter content, which allowed the colonization of insects (Ephemeroptera and Trichoptera).     

Assessing high-impact spots of climate change: spatial yield simulations with Decision Support System for Agrotechnology Transfer (DSSAT) model

Drybeans (Phaseolus vulgaris L.) are an important subsistence crop in Central America. Future climate change may threaten drybean production and jeopardize smallholder farmers’ food security. We estimated yield changes in drybeans due to changing climate in these countries using downscaled data from global circulation models (GCMs) in El Salvador, Guatemala, Honduras, and Nicaragua. We generated daily weather data, which we used in the Decision Support System for Agrotechnology Transfer (DSSAT) drybean submodel. We compared different cultivars, soils, and fertilizer options in three planting seasons. We analyzed the simulated yields to spatially classify high-impact spots of climate change across the four countries. The results show a corridor of reduced yields from Lake Nicaragua to central Honduras (10–38 % decrease). Yields increased in the Guatemalan highlands, towards the Atlantic coast, and in southern Nicaragua (10–41 % increase). Some farmers will be able to adapt to climate change, but others will have to change crops, which will require external support. Research institutions will need to devise technologies that allow farmers to adapt and provide policy makers with feasible strategies to implement them.     

Experimental validation of in situ CO2 capture with CaO during the low temperature combustion of biomass in a fluidized bed reactor

A novel concept for capturing CO₂ from biomass combustion using CaO as an active solid sorbent of CO₂ is discussed and experimentally tested. According to the CaO/CaCO₃ equilibrium, if a fuel could be burned at a sufficiently low temperature (below 700 °C) it would be possible to capture CO₂ “in situ” with the CaO particles at atmospheric pressure. A subsequent step involving the regeneration of CaCO₃ in a calciner operating at typical conditions of oxyfired-circulating fluidized combustion would deliver the CO₂ ready for purification, compression and permanent geological storage. Several series of experiments to prove this concept have been conducted in a 30 kW interconnected fluidized bed test facility at INCAR-CSIC, made up of two interconnected circulating fluidized bed reactors, one acting as biomass combustor-carbonator and the other as air-fired calciner (which is considered to yield similar sorbent properties than those of an oxyfired calciner). CO₂ capture efficiencies in dynamic tests in the combustor-carbonator reactor were measured over a wide range of operating conditions, including different superficial gas velocities, solids circulation rates, excess air above stoichiometric, and biomass type (olive pits, saw dust and pellets). Biomass combustion in air is effective at temperatures even below the 700 °C, necessary for the effective capture of CO₂ by carbonation of CaO. Overall CO₂ capture efficiencies in the combustor-carbonator higher than 70% can be achieved with sufficiently high solids circulation rates of CaO and solids inventories. The application of a simple reactor model for the combined combustion and CO₂ capture reactions allows an efficiency factor to be obtained from the dynamic experimental test that could be valuable for scaling up purposes.     

Physico-chemical and toxicological characterization of the historic estuarine sediments: a multidisciplinary approach

The accumulation rates, the geochronology of metals and PAH contamination, and the Microtox toxicity are studied in five sediment cores (50 cm length) covering different areas of the Santander Bay, Northern Spain. Chronology given by (210)Pb and (137)Cs reveals significant differences in accumulation rates between sites (0.2-1.1 cm/year), as well as a variable degree of anthropogenic enrichment factors for Fe, Mn, Cu, Pb, Zn, Ni (from 1 to 15) and concentrations of summation Sigma 16PAHs (from 0.01 to 23.84 mg/kg dw) in sediments over the last 90 years. The results indicate the increasing contamination pressure from industrial and urban activities along the Bay. No toxic results from the Microtox test are obtained either with pore water or with normalised sediment aqueous extracts (European Norm EN 12457), suggesting low water solubility and low availability of contaminants in the studied sediments. However, the EC50 values from the Microtox Basic Solid Phase Test (BSPT) ranged from 0.03% to 2.35%, showing vertical toxicity profiles in accordance with metal and PAHs behaviour. The correlation degrees of Microtox BSPT toxicity to chemical concentration in sediment profiles are widely variable showing a high site-dependent toxicity. The oligochaete Limnodrilus hoffmeisteri has been used as a chronic bioassay over surface sediments of two of the studied sites, showing results coherent with the Microtox BSPT acute test results. Global results of the present work provide regional geochemical baselines for metals and PAHs and toxicological data now make it possible to obtain a preliminary quality assessment of the Santander Bay sediment profiles.     

Investigation of irradiated soil byproducts

The high dose irradiation of windblown soil deposited onto the surface of spent nuclear fuel is of concern to long-term fuel storage stability. Such soils could be exposed to radiation fields as great as 1.08 x 10(-3) C/kg-s (15,000 R/hr) during the 40-year anticipated period of interim dry storage prior to placement at the proposed national repository. The total absorbed dose in these cases could be as high as 5 x 10(7) Gy (5 x 10(9) rads). This investigation evaluated the potential generation of explosive or combustible irradiation byproducts during this irradiation. It focuses on the production of radiolytic byproducts generated within the pore water of surrogate clays that are consistent with those found on the Idaho National Engineering and Environmental Laboratory. Synthesized surrogates of localized soils containing combinations of clay, water, and aluminum samples, enclosed within a stainless steel vessel were irradiated and the quantities of the byproducts generated measured. Two types of clays, varying primarily in the presence of iron oxide, were investigated. Two treatment levels of irradiation and a control were investigated. An 18-Mev linear accelerator was used to irradiate samples. The first irradiation level provided an absorbed dose of 3.9 x 10(5)+/-1.4 x 10(5)Gy (3.9 x 10(7)+/-1.4 x 10(7) rads) in a 3-h period. At the second irradiation level, 4.8 x 10(5)+/-2.0 x 10(5)Gy (4.8 x 10(7)+/-2.0 x 10(7) rads) were delivered in a 6-h period. When averaged over all treatment parameters, irradiated clay samples with and without iron (III) oxide (moisture content = 40%) had a production rate of hydrogen gas that was a strong function of radiation-dose. A g-value of 5.61 x 10(-9)+/-1.56 x 10(-9) mol/J (0.054+/-0.015 molecules/100-eV) per mass of pore water was observed in the clay samples without iron (III) oxide for hydrogen gas production. A g-value of 1.07 x 10(-8)+/-2.91 x 10(-9) mol/J (0.103+0.028 molecules/100-eV) per mass of pore water was observed in the iron (III) oxide containing clay samples for hydrogen gas production. This value was noticeably larger when the samples were spiked with both KCl and KNO3 salts. The ratio of oxygen to nitrogen gas was observed to increase as a function of absorbed dose particularly in the presence of both KCl and KNO3 salts. The creation of radiolytic byproducts produced an observable but small increase in headspace pressure. Temperature increases during irradiation were not observed. Additionally, KCl and KNO3 salts added to the clays enhanced nitrite production as a function of radiation-dose and the type of clay considered. The addition of aluminum to these samples had no statistically discernable impact at the alpha = 0.05 level. Generation of the irradiation products, hydrogen peroxide and hydrogen gas also depended upon the type of clay irradiated and the presence of both KCl and KNO3 salts and the total dose received.     

Effective Transboundary Aquifer Areas: An Approach for Transboundary Groundwater Management

The natural complexity, heterogeneity, and extent of transboundary aquifers around the world, have led to controversy over which method or criteria should be used to identify and delineate their boundaries. Currently, there is no standard methodology that aquifer‐sharing countries can use to delineate the area of a transboundary aquifer. In the case of Mexico and Texas, Mexico uses administrative boundaries, whereas Texas uses geological boundaries. This paper proposes a method for delineation and prioritization of aquifers (or aquifer areas) called effective transboundary aquifer areas (ETAAs), which uses a combination of physical criteria (geological boundaries, topography, and hydrography) and the location and density of active water wells in the borderland between Mexico and Texas. This method identifies the area of priority (productivity area) in the aquifer using pumping patterns or hot spots regardless of the aquifer’s surficial geological limits, therefore offering a more effective, local and practical management option at the transboundary level. Different geological features or pumping patterns will have different sizes and locations of ETAAs within the same aquifer. In West Texas, which is dominated by bolsons, the method produces limited options for ETAAs, whereas in South Texas in the easternmost border the identified ETAAs are more significant.