Dry Deposition of Ammonia at Environmental Concentrations on Selected Plant Species

The deposition velocity of NH₃ on six plant species at environmental concentrations has been studied in a dynamic plant gas exchange reactor. The total resistance to the transport of NH₃ was studied. The aerodynamic resistance was determined directly by NH₃ gas absorption in aqueous solutions at environmental concentrations in a two-phase gradientless reactor modeling the transfer processes through the stomata in a leaf. The concentration of NH₃ in the gas phase ranged from 50 to 1000 ppb and the temperature varied from 25 to 30°C. The results for the deposition velocity for NH₃, during the day, varied from 0.3 to 1.3 cm/s. The deposition velocities at night were about one order of magnitude smaller. These results are compared with estimates from the Frdssling equation which consistently yields higher values of the same order of magnitude. To determine accurate atmospheric transport models or global budget models, a variable deposition velocity should be used to account for the diurnal and seasonal variations in the surface resistance.     

Design and Testing of a New Size Classifying Isokinetic Sequential Aerosol Sampler

Two versions of a size-classifying isokinetic sequential aerosol sampler (SCISAS) have been designed, built, tested, and deployed in a field program in the southwestern United States. The SCISAS units can operate at unattended sites, exposing four or more filter types simultaneously, in two size ranges, for six sampling time Intervals. Design considerations included theoretical estimates of aerosol particle losses in the 0-15 μm size range.

SCISAS prototypes have been tested to evaluate their sampling efficiency as a function of flow rate, the sensitivity of the sampling efficiency to isokinetic matching within the SCISAS sampling stack, the equivalency of their sampling ports, and their passive deposition characteristics. The prototypes were also compared to several other types of aerosol filtration samplers already in common use. These tests show that particle loss mechanisms within the SCISAS usually cause no more than 5 percent losses, and that the SCISAS units agree, within one to two measurement uncertainty intervals, with other types of aerosol samplers.     

Inclusion of pressure hazards into NFPA 704 instability rating system

The lack of awareness in identifying potential hazardous reactions is commonly cited as a cause of accidents. One major problem is the lack of consensus to assign appropriate reactivity hazards ratings. NFPA 704 instability rating system is widely used throughout the chemical industry. However, this system does not take into account pressure hazards. Inclusion of pressure hazards into the NFPA 704 instability rating will provide a more comprehensive rating system, which will characterize hazards that may arise not only from exothermic reactions, but also from endothermic decompositions with gas evolution. In this work we present a proposed method for developing a simple methodology to include pressure and pressure rates into the assignment of instability ratings. The current NFPA 704 instability rating number for the systems studied does not show a trend between the pressures and pressure rates generated with the assigned rating. Therefore, arbitrary threshold values were chosen to rank the substances according to the pressure and pressure rate generated. Results obtained from a variety of systems with endothermic decompositions show that their pressure and pressure rates have magnitudes comparable to systems that decompose exothermically. So far, this method has been applied only to a limited set of data. However, assignment of arbitrary values for normalized maximum pressures generated and pressure rates, taking as reference the values obtained for the thermal decomposition of cumene hydroperoxide and di-terbutyl peroxide appears to give reasonable limits for the rating chemicals based on their relative pressure hazards.     

A prototype printer for laser driven micro-transfer printing

This paper demonstrates a new mode of automated micro transfer printing called laser micro transfer printing (LμTP). As a process, micro-transfer printing provides a unique and critical manufacturing route to extracting active microstructures from growth substrates and deterministically assembling them into a variety of functional substrates ranging from polymers to glasses and ceramics and to metallic foils to support applications such as flexible, large-area electronics, concentrating photovoltaics and displays. Laser transfer printing extends micro-transfer printing technology by providing a non-contact approach that is insensitive to the preparation and properties of the receiving substrate. It does so by exploiting the difference in the thermo-mechanical responses of the microstructure and transfer printing stamp materials to drive the release of the microstructure or ‘ink’ from the stamp and its transfer to substrate. This paper describes the process and the physical phenomena that drive it. It focuses on the use of this knowledge to design and test a print head for the process. The print head is used to demonstrate the new printing capabilities that LμTP enables.     

The value of cooperation in resolving international river basin disputes

This paper reviews the phenomenon of international river basins, and concludes that the sharing of river basins between and among countries is the rule rather than the exception for the major river systems of the world. The growth of the nation state with rivers as agreed-upon boundaries, as cease-fire lines and as natural defensive lines has led to the carving up of most river basins around the world. More than 200 river basins, accounting for more than 50% of the land area of the Earth, are shared by two or more countries. When population densities were low, there was plenty of water for all and major conflicts were avoided. With the rapid population and economic growth experienced in the past few decades, conflicts over use of water are becoming more important. It is expected that in the near future such conflicts will become much more severe. The paper reviews the literature on attempts to analyse river basin conflicts and negotiate solutions. Some rudimentary game models are examined, and some tentative conclusions, based upon various game theory concepts of stability, are applied to the Ganges-Brahmaputra basin. The paper ends with suggestions on how to plan Pareto-Admissible outcomes for international basins.     

Real-time measurements of jet aircraft engine exhaust

Particulate-phase exhaust properties from two different types of ground-based jet aircraft engines--high-thrust and turboshaft--were studied with real-time instruments on a portable pallet and additional time-integrated sampling devices. The real-time instruments successfully characterized rapidly changing particulate mass, light absorption, and polycyclic aromatic hydrocarbon (PAH) content. The integrated measurements included particulate-size distributions, PAH, and carbon concentrations for an entire test run (i.e., "run-integrated" measurements). In all cases, the particle-size distributions showed single modes peaking at 20-40nm diameter. Measurements of exhaust from high-thrust F404 engines showed relatively low-light absorption compared with exhaust from a turboshaft engine. Particulate-phase PAH measurements generally varied in phase with both net particulate mass and with light-absorbing particulate concentrations. Unexplained response behavior sometimes occurred with the real-time PAH analyzer, although on average the real-time and integrated PAH methods agreed within the same order of magnitude found in earlier investigations.     

Use of fecundity measured directly throughout the breeding season to test a source-sink demographic model

Populations of landbirds (bird species that occupy terrestrial habitats for most of their life cycle) are declining throughout North America (north of Mexico) and Europe, yet little is known about how demography is driving this trend. A recent model of 5 geographically separated populations of Cerulean Warblers (Dendroica cerulea) that was based on within-season sampling of nest survival and fledgling success shows that all populations are sinks (annual reproduction is consistently less than annual adult mortality). I tested this indirect model by directly measuring fecundity (number of female fledglings/female) during the breeding season for 2 years in a Cerulean Warbler population occupying a mature forest in southwestern Michigan (U.S.A.) I determined territories of male birds on the basis of male plumage characters and phases of the nesting cycle (2007) and on uniquely color-banded males (2008). I transferred locations of identified males to topographic maps. I counted all fledglings in territories from May to July each year. The model I tested may apply only to single-brooded species; therefore, I searched the literature to estimate the percentage of single-brooded species in North America. The breeding season of Cerulean Warblers was short- nearly all nests were initiated from mid-May to late June. Nest predation and brood parasitism were primary and rare causes of nest failure, respectively. Significantly fewer Cerulean Warblers fledged from parasitized than from nonparasitized nests. Fledgling survival required to maintain the population size was well above previously published values for Neotropical migrants. Single-brooded species comprise 62% of North American breeding bird species for which the number of broods per year is known; I believe my results may apply to these species. The consistency between identification of populations as sources or sinks on the basis of either model estimates or direct measurements suggests that a demographic model relying on within-season sampling of fecundity is adequate to determine population status of single-brooded avian populations. In addition, on the basis of results of previous studies, annual adult survival rate of the Cerulean Warbler is typical of parulid warblers that are not declining. Thus, low fecundity, here determined with different quantitative methods, can drive status of landbird species with high-observed survival.     

Bayesian networks make LOPA more effective,QRA more transparent and flexible,and thus safety more definable!

Quantitative risk analysis is in principle an ideal method to map one’s risks, but it has limitations due to the complexity of models, scarcity of data, remaining uncertainties, and above all because effort, cost, and time requirements are heavy. Also, software is not cheap, the calculations are not quite transparent, and the flexibility to look at various scenarios and at preventive and protective options is limited. So, the method is considered as a last resort for determination of risks. Simpler methods such as LOPA that focus on a particular scenario and assessment of protection for a defined initiating event are more popular. LOPA may however not cover the whole range of credible scenarios, and calamitous surprises may emerge.In the past few decades, Artificial Intelligence university groups, such as the Decision Systems Laboratory of the University of Pittsburgh, have developed Bayesian approaches to support decision making in situations where one has to weigh gains and costs versus risks. This paper will describe details of such an approach and will provide some examples of both discrete random variables, such as the probability values in a LOPA, and continuous distributions, which can better reflect the uncertainty in data.     

The Precautionary Principle for Environmental Management: A Defensive-expenditure Application

The Precautionary Principle has emerged in response to the need for an effective method for dealing with risks and uncertainties in environmental management. In essence, the Principle requires action to prevent serious and irreversible damage even before harm can be scientifically demonstrated or economically assessed. Proponents argue that the Principle should be applied in situations where both the probability and value of irreversible damage are unknown. The lack of these particular data prevent a full cost–benefit analysis, but permit application of the Principle through the defensive-expenditure approach. How much would the community be required to pay to fund alternatives to maintain the environment and so defend existing levels of utility? Through the application of risk analysis and the stochastic dominance technique, a range of options and outcomes can be examined incorporating the using available information within a framework consistent with economic rationality. An extended risk simulation is applied to an environmental issue where there is a risk of serious and irreversible damage to the environment, namely, protection of the Barmah-Millewa forest-wetland in Australia.