SBR降解动力学研究

采用SBR工艺处理有机废水,在已有工艺条件下对生物降解动力学进行了研究,得出生物降解反应为一级反应。研究表明,用Monod公式能较好反映出有机物的降解规律,确定了其动力学参数V_max=14.6306 d^-1,K_s=83.2993 mg/L,得出SBR降解动力学模型为V=14.6306X·S/(83.2993+S)。利用以动力学为基础的动态模拟法优化SBR工艺,实验结果表明该方法合理可行,对SBR的设计与运行有一定的指导作用,可作为SBR反应器扩大实验和设计的依据。     

负载壳聚糖膨润土的制备及其吸附性能的影响

以天然膨润土和壳聚糖为原料,制得一种新型水处理剂——负载壳聚糖膨润土,研究了制备条件对酸性大红印染废水处理效果的影响。实验表明,当壳聚糖的浓度为30 g/L、膨润土质量与壳聚糖溶液体积之比为0.7、浸泡时间80 min、微烘时间15 min时,壳聚糖改性膨润土对酸性大红印染废水的脱色率可达97%。对改性土进行比表面积测定、电镜扫描及X-射线衍射等结构特性分析,证明壳聚糖的引入改变了膨润土在水中的分散状态,增强了其对污染物的吸附和离子交换能力。     

电-生物耦合技术对偶氮染料的去除研究

酸性大红GR是一种较难生物降解的偶氮染料,采用一种电场和生物耦合的新型技术处理酸性大红GR模拟废水,并与单纯电化学法和好氧生物法进行试验对照。结果表明：反应6 h后,电化学法、好氧生物法、电-生物耦合技术对酸性大红GR的去除率分别达到15.7%、25.8%和71.2%,电-生物耦合技术能明显提高酸性大红GR的去除效果,起到强化生物处理的作用。在15 mA微电流条件下电-生物技术能克服50 mg/L酸性大红GR对好氧生物处理的抑制作用,为高浓度难降解染料废水的生物强化处理提供了可能。     

液化石油气轿车实际道路污染物排放特征

利用PEMS对国2技术LPG出租轿车和汽油轿车的实际道路排放进行测试,基于测试数据对LPG轿车排放特征进行解析,并与汽油轿车的排放因子进行对比分析.结果显示:速度和行驶模式对LPG轿车污染物排放影响明显;LPG轿车CO 2、CO、HC和NOx污染物的实测排放因子分别为(169.5±22.2)、(2.18±2.38)、(...     

改性玉米秸秆吸附Cu2+的动力学和热力学

本研究用ZnCl2作为活化剂,使用功率640 W的微波照射4 min的方法制备改性玉米秸秆。考察投加量、pH、吸附时间对吸附性能的影响,并对等温吸附特征、吸附动力学和热力学进行了系统研究。结果表明:投加量为0.2 g,pH为6,改性玉米秸秆对Cu2+具有很好的吸附效果,吸附在8 h后达到平衡。该吸附过程符合Langmuir及Freundlich等温吸附模型和准二级动力学方程,其反应的吉布斯自由能△G<0,为自发反应过程。     

连续流改进A~2/O反应器去污效果及分相培养研究

以生活污水为原水,在常温(25~33℃)条件下采用连续流改进A2/O反应器进行脱氮除磷实验研究。系统内COD降解,TN与TP去除主要在活性污泥段完成,而NH4+-N去除基本在生物接触氧化区完成。从中沉池出水硝态氮影响因素分析可知,选用较高的有机负荷有利于实现系统内分相培养。泥龄对实现系统内微生物异养菌和自养菌的分相培养具有关键影响。当泥龄10 d,可实现系统内异养菌与自养菌的分相培养。     

用于污水再生利用的生物活性炭床的有机物降解特性

以微生物增殖动力学的基本方程-莫诺方程为出发点,通过氮同位素分析比较了具有同源性微生物的生物陶粒滤床和生物活性炭床的有机物生物降解规律,建立了生物活性炭床的有机物生物降解动力学方程,提出在污水再生利用过程中生物活性炭床符合高基质有机物降解动力学模型,即有机物降解呈一级反应动力学方程。以此方程为基础,分析计算了生物活性炭床沿炭床深度的吸附性能,结果表明,在生物活性炭床中,随生物功能的减弱,生物活性炭床对有机物的吸附能力逐渐加强。     

炭纤维载体固定床厌氧发酵启动运行效果实验

以开发高效率、抗冲击性能强的高浓度有机废水沼气发酵技术为目的,用传统的 UASB反应器作为对照,研究了以炭纤维为生物膜载体的固定床厌氧反应器的启动运行效果。反应器进口废水 COD 为 5 000 mg/L, 水力停留时间 (HRT) 由213 h 逐步缩短为35 h,进水有机容积负荷(OLR)由0.56 kg COD/ (m³·d)提到3.45 kg COD/(m³·d)。结果表明,固定床反应器厌氧发酵的效率比对照高,出水 pH 值也比对照稳定;运行到第 50 d 时,固定床厌氧反应器和对照的 COD去除率分别由第 7 d 的36.56%和33.58%上升到87.9%和62.6%;固定床厌氧反应器的容积比产气率最高为1.16 m³/(m³·d),累计产气量为415.59 L,而对照的容积比产气率最高值仅为0.31 m³ /(m³·d),累计产气量为 71.66 L,前者最高容积比产气率和累计产气量分别是后者的3.74倍和5.78倍。固定床厌氧反应器的启动速度、COD 去除率和产甲烷效率显著地高于对照反应器。     

含锰废渣的氧化-活化再生回用工艺

为实现紫苏醛生产过程中二氧化锰（氧化剂）的循环利用,采用一种新型的氧化-活化工艺再生得到活性二氧化锰,即以紫苏醇合成紫苏醛过程中产生的含锰废渣为原料,首先采用氯酸钠氧化含锰废渣得到初级二氧化锰,然后使用高锰酸钾对初级二氧化锰进一步活化得到活性二氧化锰。实验表明,制取初级二氧化锰的最佳工艺条件为：反应时间为4h,反应温度为90～95℃,硫酸摩尔浓度为1.5 mol/L,氯酸钠加量为理论量的130%。制取活性二氧化锰的合适条件为：反应温度在60℃时,反应时间为1.5 h;反应温度在50℃时,反应时间为2.5 h。采用氧化-活化法再生的活性二氧化锰氧化紫苏醇,紫苏醛的产率可达52.8%,与使用电解二氧化锰氧化得到的紫苏醛的产率53.1%相当,而使用初级二氧化锰,紫苏醛的产率仅为14.9%。     

Cyanide Removal by Chinese Vegetation. Quantification of the Michaelis-Menten Kinetics (6 pp)

Background Little is known about metabolism rates of environmental chemicals by vegetation. A good model compound to study the variation of rates among plant species is cyanide. Vascular plants possess an enzyme system that detoxifies cyanide by converting it to the amino acid asparagine. Knowledge of the kinetic parameters, the half-saturation constant (Km) and the maximum metabolic capacity (vmax), is very useful for enzyme characterization and biochemical purposes. The goal of this study is to find the enzyme kinetics (KM and vmax) during cyanide metabolism in the presence of Chinese vegetation, to provide quantitative data for engineered phytoremediation, and to investigate the variation of metabolic rates of plants. Methods Detached leaves (1.0 g fresh weight) from 12 species out of 9 families were kept in glass vessels with 100 mL of aqueous solution spiked with potassium cyanide at 23°C for 28 h. Four different treatment concentrations of cyanide were used, ranging from 0.44 to 7.69 mg CN/L. The disappearance of cyanide from the aqueous solution was analyzed spectrophotometrically. Realistic values of the half-saturation constant (KM) and the maximum metabolic capacity (vmax) were estimated by a computer program using non-linear regression treatments. As a comparison, Lineweaver-Burk plots were also used to estimate the kinetic parameters. Results and Discussion The values obtained for KM and vmax varied with plant species. Using non-linear regression treatments, values of vmax and KM were found in a range between 6.68 and 21.91 mg CN/kg/h and 0.90 to 3.15 mg CN/L, respectively. The highest vmax was by Chinese elder (Sambucus chinensis), followed by upright hedge-parsley (Torilis japonica). The lowest vmax was demonstrated by the hybrid willow (Salix matssudana x alba). However, the highest KM was found in the water lily (Nymphea teragona), followed by the poplar (Populus deltoides Marsh). The lowest KM was demonstrated by corn (Zea mays L.). The values of vmax were normally distributed with a mean of 13 mg CN/kg/h. Conclusions Significant removal of cyanide from aqueous solution was observed in the presence of plant materials without phytotoxicity, even at high doses of cyanide. This gives rise to the conclusion that the Chinese plant species used in this study are all able to efficiently metabolize cyanide, although with different maximum metabolic capacities. A second conclusion is that the variation of metabolism rates between species is small. All these plants had a similar KM, indicating the same enzyme is active in all plants. Recommendations and Outlook Detoxification of cyanide with trees seems to be a feasible option for cleaning soils and water contaminated with cyanide. For phytoremediation projects, screening appropriate plant species adapted to local conditions should be seriously considered. More chemicals should be investigated to find common principles of the metabolism of environmental chemicals by plants.