Chemometric tools applied to optimize a fast solid-phase microextraction method for analysis of polycyclic aromatic hydrocarbons in produced water

Environmental Science and Pollution Research - Chemometric tools are powerful strategies to efficiently optimize many processes. These tools were employed to optimize a fast-solid phase...     

Laboratory evaluation of dust-control effectiveness of pen surface treatments for cattle feedlots

Emission of particulate matter (PM) is one of the major air quality concerns for large beef cattle feedlots. Effective treatments on the uncompacted soil and manure mixture of the pen surface may help in reducing PM emission from feedlots. A laboratory apparatus was developed for measuring dust-emission potential of cattle feedlot surfaces as affected by pen surface treatments. The apparatus was equipped with a simulated pen surface, four mock cattle hooves, and samplers for PM with equivalent aerodynamic diam. ≤ 10 μm (PM(10)). The simulated pen surface had a layer of dry, loose feedlot manure with a compacted soil layer underneath. Mock hooves were moved horizontally on the manure layer to simulate horizontal action of cattle hooves on the pen surface. High-volume PM samplers were used to collect emitted dust. Effects of hoof speed, depth of penetration, and surface treatments with independent candidate materials (i.e., sawdust, wheat straw, hay, rubber mulch, and surface water application) on PM(10) emission potential of the manure layer were investigated. Our laboratory study showed PM(10) emission potential increased with increasing depth of penetration and hoof speed. Of the surface treatments evaluated, application of water (6.4 mm) and hay (723 g m(-2)) exhibited the greatest percentage reduction in PM(10) emission potential (69 and 77%, respectively) compared with the untreated manure layer. This study indicated application of hay or other mulch materials on the pen surface might be good alternative methods to control dust emission from cattle feedlots.     

Morphology,Chemical Characterization and Sources of Microplastics in a Coastal City in the Equatorial Zone with Diverse Anthropogenic Activities (Fortaleza city,Brazil)

Journal of Polymers and the Environment - The aim of the present study was to perform morphological and chemical characterizations of microplastics (MPs) found in seawater samples from the coast of...     

Drying wastes from urban forestry as an option for their recovery and use in furniture and small wooden objects

The management of urban trees generates wood wastes that are commonly destined for use as firewood or compost. However, they can be used for more noble purposes such as making furniture or small wooden objects. This study aimed to investigate the drying and the shrinkage of the wood of seven typical urban afforestation species to determine the possibility of high-valued alternative use(s). Samples of these species (Cenostigma pluviosum (DC.) E. Gagnon & G.P. Lewis.; Delonix regia (Bojer ex Hook.) Raf.; Ficus benjamina L.; Licania tomentosa (Benth.) Fritsch; Nectandra megapotamica (Spreng.) Mez; Terminalia catappa L.; and Tipuana tipu (Benth.) Kuntze) underwent a drastic drying test in a laboratory oven at 103?±?2 °C, followed by weighing on an analytical balance to monitor the weight over a 24-h period, separated into four intervals of 4 h and one of 8 h. The drying rate, shrinkage and anisotropy coefficient of the species were evaluated. Wood wastes of the species C. pluviosum and L. tomentosa showed greater shrinkage during drying, with the lowest drying rates being found among the other species. F. benjamina, D. regia, N. megapotamica, T. catappa and T. tipu showed lower values of shrinkage and regular anisotropy coefficients close to ideal for application to make small wooden objects according to the characteristics of the species already present in the industrial market. The seven species thus have potential for application in the production of small wooden objects and furniture. This use is a potential alternative for environmental and social betterment.

     

Improved 4-nitrophenol removal at Ti/RuO2–Sb2O4–TiO2 laser-made anodes

Environmental Science and Pollution Research - In this study, binary and ternary mixed metal oxide anodes of Ti/RuO2–Sb2O4 and Ti/RuO2–Sb2O4–TiO2 were prepared using two different...     

Synthesis of zeolite from Italian coal fly ash: Differences in crystallization temperature using seawater instead of distilled water

In this study Italian coal fly ash was converted into several types of zeolite in laboratory experiments with temperatures of crystallization ranging from 35 up to 90 °C. Distilled and seawater were used during the hydrothermal synthesis process in separate experiments, after a pre-treatment fusion with NaOH.The results indicate that zeolites could be formed from different kind of Italian coal fly ash at low temperature of crystallization using both distilled and seawater. SEM data and the powder patterns of X-ray diffraction analysis show that faujasite, zeolite ZK-5 and sodalite were synthesized when using both distilled and seawater; zeolite A crystallized only using distilled water. In particular the experiments indicate that the synthesis of zeolite X and zeolite ZK-5 takes place at lower temperatures when using seawater (35 and 45 °C, respectively). The formation of sodalite is always competitive with zeolite X which shows a metastable behaviour at higher temperatures (70–90 °C).The chemical composition of the fly ash source could be responsible of the differences on the starting time of synthesized zeolite with distilled water, in any case our data show that the formation of specific zeolites takes place always at lower temperatures when using seawater.     

Risks to large marine protected areas posed by drifting fish aggregation devices

Mapping and predicting the potential risk of fishing activities to large marine protected areas (MPAs), where management capacity is low but fish biomass may be globally important, is vital to prioritizing enforcement and maximizing conservation benefits. Drifting fish aggregating devices (dFADs) are a highly effective fishing method employed in purse seine fisheries that attract and accumulate biomass fish, making fish easier to catch. However, dFADs are associated with several negative impacts, including high bycatch rates and lost or abandoned dFADs becoming beached on sensitive coastal areas (e.g., coral reefs). Using Lagrangian particle modeling, we determined the potential transit of dFADs in a large MPA around the Chagos Archipelago in the central Indian Ocean. We then quantified the risk of dFADs beaching on the archipelago's reefs and atolls and determined the potential for dFADs to pass through the MPA, accumulate biomass while within, and export it into areas where it can be legally fished (i.e., transit). Over one-third (37.51%) of dFADs posed a risk of either beaching or transiting the MPA for >14 days, 17.70% posed a risk of beaching or transiting the MPA for >30 days, and 13.11% posed a risk of beaching or transiting the MPA for >40 days. Modeled dFADs deployed on the east and west of the perimeter were more likely to beach and have long transiting times (i.e., posed the highest risk). The Great Chagos Bank, the largest atoll in the archipelago, was the most likely site to be affected by dFADs beaching. Overall, understanding the interactions between static MPAs and drifting fishing gears is vital to developing suitable management plans to support enforcement of MPA boundaries and the functioning and sustainability of their associated biomass.     

Identification of protein biomarkers of mercury toxicity in fish

Bioaccumulative metals such as mercury are found in increasing amounts in fish and their consumers. In the region of the Madeira River, in the Brazilian Amazon, mercury (Hg) is a predominant contaminant in the aquatic ecosystem. There is therefore a need to find specific biomarkers of mercury toxicity in fish to monitor contaminations. Here, mercury-bound proteins were identified in the liver tissues of fishes Mylossoma duriventre and Brachyplatystoma rousseauxii. Mercury was quantified in liver tissue, pellets and protein spots by graphite furnace atomic absorption. Proteins were fractionated by two-dimensional polyacrylamide gel electrophoresis and identified by mass spectrometry with electrospray ionization. We identified nine proteins linked to mercury and that presented biomarker characteristics of mercury. Among the proteins identified, isoforms of parvalbumin, ubiquitin-40S ribosomal protein S27a, brain-specific angiogenesis inhibitor 1-associated protein 2-like protein 2 and betaine–homocysteine S-methyltransferase 1 are notable for having the molecular function of binding to metallic ions.