Use of beryllium-7 to document soil redistribution following forest harvest operations

Rapid and reliable methods for documenting soil erosion associated with forest harvest operations are needed to support the development of best management practices for soil and water conservation. To address this need, the potential for using 7Be measurements to estimate patterns and amounts of soil redistribution associated with individual post-harvest events was explored. The 7Be technique, which was originally developed for use on agricultural land, was employed to estimate soil redistribution associated with a period of heavy rainfall within a harvested forest area located in the Lake Region of Chile (39 degrees 44'7' S, 73 degrees 10'39' W; 22% slope; and mean annual rainfall 2300 mm yr(-1)). The results provided by the 7Be technique were validated against direct measurements of soil gain or loss during the same period obtained using erosion pins. The information produced by the two approaches was similar. The results of this study demonstrate the potential for using 7Be measurements to document event-based erosion in recently harvested forest areas.     

Emission factors from different burning stages of agriculture wastes in Mexico

Open-air burning of agricultural wastes from crops like corn, rice, sorghum, sugar cane, and wheat is common practice in Mexico, which in spite limiting regulations, is the method to eliminate such wastes, to clear the land for further harvesting, to control grasses, weeds, insects, and pests, and to facilitate nutrient absorption. However, this practice generates air pollution and contributes to the greenhouse effect. Burning of straws derived from the said crops was emulated in a controlled combustion chamber, hence determining emission factors for particles, black carbon, carbon dioxide, carbon monoxide, and nitric oxide throughout the process, which comprised three apparent stages: pre-ignition, flaming, and smoldering. In all cases, maximum particle concentrations were observed during the flaming stage, although the maximum final contributions to the particle emission factors corresponded to the smoldering stage. The comparison between particle size distributions (from laser spectrometer) and black carbon (from an aethalometer) confirmed that finest particles were emitted mainly during the flaming stage. Carbon dioxide emissions were also highest during the flaming stage whereas those of carbon monoxide were highest during the smoldering stage. Comparing the emission factors for each straw type with their chemical analyses (elemental, proximate, and biochemical), some correlations were found between lignin content and particle emissions and either particle emissions or duration of the pre-ignition stage. High ash or lignin containing-straw slowed down the pre-ignition and flaming stages, thus favoring CO oxidation to CO₂.

     

Biodegradation of heptachlor and heptachlor epoxide-contaminated soils by white-rot fungal inocula

The ability of certain white-rot fungi (WRF) inocula to transform heptachlor and heptachlor epoxide and its application in artificially contaminated soil were investigated. Fungal inoculum of Pleurotus ostreatus eliminated approximately 89 % of heptachlor after 28 days of incubation, and chlordene was detected as the primary metabolite. The fungal inoculum of Pleurotus ostreatus had the highest ability to degrade heptachlor epoxide; approximately 32 % were degraded after 28 days of incubation, and heptachlor diol was detected as the metabolite product. Because Pleurotus ostreatus transformed heptachlor into a less toxic metabolite and could also effectively degrade heptachlor epoxide, it was then selected to be applied to artificially contaminated soil. The spent mushroom waste (SMW) of Pleurotus ostreatus degraded heptachlor and heptachlor epoxide by approximately 91 and 26 %, respectively, over 28 days. This finding indicated that Pleurotus ostreatus SMW could be used to bioremediate heptachlor- and heptachlor epoxide-contaminated environments.     

Consumption of Ruditapes philippinarum and Ruditapes decussatus: comparison of element accumulation and health risk

Ruditapes philippinarum, a species native from the Indo-Pacific region, was introduced in Europe at the beginning of the 1970s for culture purposes, leading to a massive decrease of the native species Ruditapes decussatus and a high increase of R. philippinarum yields in Europe. Bivalves can accumulate high amounts of metals and thus easily reach concentrations that are toxic not only to themselves but also to consumers. Since differences in the accumulation of pollutants may exist between bivalve species, different health risks may be overcome. For this reason, the level of metals in seafood raises public health concerns, and international organisations like European Food Safety Authority, United States Food and Drug Administration, and Food Standards Australia and New Zealand (FSANZ) set maximum levels (MLs), above which edible seafood cannot be marketed. In order to evaluate the risk associated with the consumption of R. philippinarum and R. decussatus, both clam species were collected in the same site in Ria de Aveiro and the concentration of eight elements determined in organisms before and after a 48-h depuration period. Results evidence that even at low contaminated areas, the MLs for some elements can easily be achieved. The concentrations of As were above the reference values for FSANZ, and the provisional tolerable weekly intake (PTWI) is exceeded for As when more than 0.5 kg of R. decussatus and 0.9 kg of R. philippinarum clam flesh is consumed, in 1 week, by an adult (70 kg). When comparing with other systems worldwide, consumers of depurated clams from this coastal system have a similar or lower risk of exceeding the PTWI for Cd, As, Pb, and Hg. The recently introduced clam, R. philippinarum, accumulates lower amounts of the most health-threatening elements (less than 71 % of Cd, 40 % of As, and 20 % of Hg) than the native R. decussatus, except for Pb. R. philippinarum also reduces more the element burden when subjected to depuration than R. decussatus. Moreover, R. philippinarum allocates a lower proportion of the accumulated elements in the soluble fraction, where they are readily available. Thus, it is safer to consume R. philippinarum than R. decussatus, except when clams come from areas heavily polluted by Pb.     

Organochlorine compounds in bovine milk from the state of Mato Grosso do Sul – Brazil

Organochlorines are highly hydrophobic, synthetic organic pollutants that accumulate in the environment and in food webs. The primary route of human exposure to organochlorines is through food-mainly fat-rich food of animal origin such as meat, fish, and dairy products. Here we determined the presence and concentration of organochlorine residues in pasteurized milk from Mato Grosso do Sul, Brazil, to monitor consumer exposure to these contaminants. Organochlorine pesticides in milk samples were analyzed using solid phase extraction in octadecyl silica-prepacked columns and identified by gas chromatography using an electron capture detector. Of the 100 composite samples analyzed, more than 90% contained residues of organochlorine pesticides: aldrin was present in 44% of the samples, followed by ∑DDT (36%), mirex (34%), endosulfan (32%), chlordane (17%), dicofol (14%), heptachlor (11%) and dieldrin (11%). Compared to the values established by law, the concentration of the compounds in some samples was above the reference values. Given the importance that milk and its products have in the human diet, it is essential to know whether the levels of pesticide residues are kept well below the recommended levels to minimize the risk to human health.     

Integrated biological responses of zebrafish (Danio rerio) to analyze water quality in regions under anthropogenic influence

This study analyzed water quality in regions around Patos lagoon (Southern Brazil) that are under anthropogenic pressure. Water samples were collected from five different sites, including one used as a source for human consumption (COR) and others known to be influenced by human activities (IP). Danio rerio (Teleostei, Cyprinidae) organisms were exposed for 24 h to these water samples, plus a control group. It was observed that: (1) reactive oxygen species levels were lower in COR and IP than in the control group; (2) glutamate-cysteine ligase (catalytic subunit) expression was higher in COR than in other sites; (3) exposure to all water samples affected long-term memory (LTM) when compared to control group. Thus, some water samples possess the ability to modulate the antioxidant system and to induce a decline in cognitive functions, as measured by LTM. The obtained results indicate that a combination of variables of different organization level (molecular, biochemical and behavioral) can be employed to analyze water quality in impacted regions.     

Percolation and batch leaching tests to assess release of inorganic pollutants from municipal solid waste incinerator residues

In this study, percolation and batch leaching tests were considered in order to characterize the behaviour of air pollution control (APC) residues produced in a municipal solid waste incinerator (MSWI) as a function of the liquid to solid ratio (L/S). This waste is hazardous, and taking into account their physical and chemical properties, leaching of contaminants into the environment is the main concern. In our work the leaching behaviour of toxic heavy metals (Pb, Zn, Cr, Ni and Cu) and inorganics associated with soluble salts (Na, K, Ca and Cl) was addressed. Although pH of the leaching solution is the most important variable, L/S may also play an important role in leaching processes. In our work, results from column and batch tests were compared in terms of concentration (mg/L) and releasing (mg/kg). The APC residues revealed to be hazardous according to both tests, and both Pb and Cl⁻ far exceeded the regulatory thresholds. The material exhibits high solubility, and when the liquid to solid ratio was high, more than 50% can be solubilised. The patterns of release may be in some cases availability or solubility controlled, and the former was easier to identify. When the results from column and batch experiments were compared by representing the cumulative released amounts (in mg/kg) as a function of L/S, both curves match for Zn, Ni, Cu, K, Na, Cl and Ca, but for Cr and Pb a significant difference was observed. In fact, the column experiments revealed that under percolation conditions it should be expected slow releasing of Pb along time. From this study, it can be concluded that the released amounts obtained in batch experiments for a certain L/S should be considered as the worst case for medium term. Some simple models proposed on the literature and based on local equilibrium assumption showed good fitting to experimental data for soluble species (non-reactive solutes).     

Lead and cadmium accumulation in anuran amphibians of a permanent water body in arid Midwestern Argentina

Purpose

Heavy metals have been detected in water and sediments from the Embalse La Florida, an artificial lake in the arid region of San Luis province, Argentina, representing one of the few sources of permanent water for reproduction of native anuran species. This study assesses lead (Pb) and cadmium (Cd) concentrations in the anuran species found in this water reservoir as well as differences between compounds, species and sites of collection.

Methods

Adult anuran amphibians were collected on the north and south shores of the Embalse La Florida and Pb and Cd concentrations were measured in whole body homogenates digested using wet ashing techniques.

Results

All individuals of the six species assayed had detectable levels of Pb and Cd that ranged from 1.19 to 5.57 ??g/g dry mass and from 1.09 to 6.86 ??g/g dry mass, respectively. Anuran amphibians collected in the more contaminated south shore accumulated 21% more Cd and 40% more Pb than individuals from the less altered north shore. Cd and Pb accumulation was not significantly correlated with the concentration in water at the site of collection.

Conclusions

Amphibians of the Embalse La Florida accumulate Cd and Pb. Between and within species, differences were detected in Cd and Pb concentrations. Differences in metal concentrations between species, metals, and individuals collected on shores of the Embalse La Florida with different contamination, were detected. Therefore, it is crucial to implement adequate policies to protect amphibians from the accelerated urban development experienced in this location.     

A national inventory to estimate release of polychlorinated dibenzo-p-dioxins and dibenzofurans in Portugal

Taking into account current environmental concerns, the main objective of this work focused a national inventory aiming to estimate the amount of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) released in Portugal in 2006. The methodology used was based on the Standardized Toolkit for Identification and Quantification of Dioxins and Furan Releases, developed by UNEP Chemicals, in 2005. The method allows the assessment of the amount of PCDD/PCDF released into the environment along five vectors involving air, water, land, products and residues. Facing some difficulties mainly regarding to the availability of data for some activities known to produce PCDD/PCDF, three scenarios (Sc1 to Sc3) corresponding to lower, central and upper estimates were established. The Sc1 scenario (lower estimate) includes the situations where in case of doubt or scarce information, reduced or none emission values were assumed, Sc2 refers to a central estimate, which is believed to be the most realistic for the Portuguese situation, while Sc3 corresponds to the worst case (upper estimate). The results obtained pointed out that the total amount of PCDD/PCDF emitted in Portugal during the period under analysis was in the range of 51.2-217.9 g TEQ year⁻¹, with the most likely value of 95.2 g TEQ year⁻¹ achieved under the Sc2 scenario. This study also showed that the methodology developed by UNEP Chemicals is a very simple one, and the main difficulty is the availability of data. The main indicators calculated in this study were 8.98 μg TEQ/(year person) by taking into account the total amount of PCDD/PCDF released, and 3.63 μg TEQ/(year person) when only air emissions were considered.