Biochemical changes during the reproductive cycle of the deep-sea decapod <Emphasis Type="Italic">Nephrops norvegicus</Emphasis> on the south coast of Portugal

The objectives of the present study were to characterize the changes in the proximate chemical composition, lipid classes, fatty-acid profiles, glycogen and cholesterol contents of the muscle, ovary and hepatopancreas of Nephrops norvegicus (L.), during the reproduction cycle of this species. The gonadosomatic index increased significantly in May and June and during maturation, suggesting that spawning may start in late spring or summer. The hepatosomatic index also increased throughout the ovarian maturation, suggesting that the hepatopancreatic resources are not depleted. Positive correlations between lipid levels in the ovary and the gonadosomatic index (r=0.51, P<0.05) and the hepatopsomatic index (r=0.27, P<0.05) were found. In fact, ovarian lipid levels increased with maturation, but no concomitant decrease occurred in hepatopancreatic lipids. The muscle showed very low lipid levels (mainly polar lipids), presenting a significant increase during May and June (P<0.05). Higher proportions of neutral lipids, mainly triacylglycerols, were observed in the ovary and the hepatopancreas. Since both ovarian and hepatopancreatic cholesterol increased with maturation, the mobilization of hepatopancreatic cholesterol stores to build up ovarian cholesterol was not clear. On the other hand, protein and glycogen contents in the muscle, ovary and hepatopancreas did not vary as a function of ovary maturity stage. Among the various tissues analysed, the glycogen was mainly stored in the hepatopancreas and to a lesser extent in the muscle. In both ovary and hepatopancreas the major fatty acids were 16:0, 18:1(n-7), 18:1(n-9), 20:5(n-3) and 22:6(n-3), and significant increases (P<0.05) in the levels of monounsaturated and polyunsaturated fatty acids were observed in the ovary during sexual maturation, which indicates these compounds are the major sources of energy during embryonic and early larval development. It was evident that reproduction has profound effects upon the biochemistry of this species, because there are large associated energy costs, owing to the increase in biosynthetic work, which will support the lecithotrophic strategy of the embryos and first larval stages.     

Mercury uptake and allocation in Juncus maritimus: implications for phytoremediation and restoration of a mercury contaminated salt marsh

Juncus maritimus is the most abundant macrophyte in Laranjo bay, a Portuguese salt marsh heavily polluted by mercury (Hg). With the aim to elucidate the role of this species in the salt marsh Hg cycling and restoration, plants were harvested between March 2006 and January 2008 from four locations differing in Hg contamination. Metal uptake and distribution between plant organs were evaluated, biomass and Hg pools were also determined. Results showed that J. maritimus may influence the sediment pH and Eh, thus increasing the Hg available for uptake. Most (95-98%) of the absorbed Hg was retained belowground, phytostabilizing the metal and reducing the amount of Hg in the sediments. These results suggest that in salt marshes dominated by J. maritimus the approach could be phytostabilization, where these plants can be used to immobilize metals and store them belowground, reducing the pool of bioavailable Hg within contaminated marshes and acting as a sink rather than a source of contamination to the surrounding areas.     

TPH-contaminated Mexican Refinery Soil: Health Risk Assessment and the First Year of Changes

The soil of a coastal Mexican refinery is quite contaminated, especially by hydrocarbons, with detected concentrations up to 130000 mg kg(-1) as TPHs (total petroleum hydrocarbons). The main sources of contamination are pipelines, valves, and old storage tanks, besides the land disposal of untreated hydrocarbon sediments derived from the cleaning of storage tanks. A health risk assessment (HRA) was carried out in order to measure the risk hazard indexes and clean-up standards for the refinery soil. HRA suggested the following actions to be taken: benzene concentrations must be reduced in eight of the 16 studied refinery zones to 0.0074-0.0078 mg kg(-1). Also, vanadium concentration must be reduced in two zones up to a concentration of 100 mg kg(-1). In only one of all of the studied zones, benzo(a)pyrene concentration must be reduced to 0.1 mg kg(-1). After 1 yr, TPHs showed a diminution of about 52%. Even though TPHs concentrations were variable, during 1999 the average concentrations were as much as 15.5 times the goal concentration. For year 2000, TPHs concentrations were only 7.4-fold the proposed value. For the 1999-2000 period, PAHs (polycyclic aromatic hydrocarbons) concentrations decreased by 82%. Some PAHs with 2, 3, 4, and 5 aromatic rings were removed up to 100% values.     

Monitoring of a Coastal Mediterranean Area: Culturable Bacteria, Phytoplankton, Environmental Factors and their Relationships in the Southern Adriatic Sea

Culturable heterotrophic bacterial and phytoplanktonic densities were investigated at four sites in the Southern Adriatic Sea (Brindisi, S. Cataldo, Otranto and S. M. di Leuca) over an annual cycle. The main phytoplankton groups, the bacterial biodiversity, as well as the faecal contamination indicators were determined. Culturable bacterial numbers averaged 4.8 ± 0.2 log CFU ml⁻¹ whereas phytoplankton numbers averaged 2.1 ± 0.4 log cells ml⁻¹. Relationships between culturable bacteria, phytoplankton and the environmental factors were established. Bacterial and phytoplankton densities usually depended significantly on temperature, dissolved oxygen, phosphate and nitrite only in the S. Cataldo transect. In all the examined transects phytoplankton showed a bloom during the January–February period followed by a bacterial peak during the February–March period. Thus we can suppose that the phytoplankton winter bloom is responsible for the availabily of organic matter for bacterial populations in the following months in this oligotrophic ecosystem.     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Treatment and use of air pollution control residues from MSW incineration: an overview

This work reviews strategies for the management of municipal solid waste incineration (MSWI) residues, particularly solid particles collected from flue gases. These tiny particles may be retained by different equipment, with or without additives (lime, activated carbon, etc.), and depending on the different possible combinations, their properties may vary. In industrial plants, the most commonly used equipment for heat recovery and the cleaning of gas emissions are: heat recovery devices (boiler, superheater and economiser); dry, semidry or wet scrubbers; electrostatic precipitators; bag filters; fabric filters, and cyclones. In accordance with the stringent regulations in force in developed countries, these residues are considered hazardous, and therefore must be treated before being disposed of in landfills. Nowadays, research is being conducted into specific applications for these residues in order to prevent landfill practices. There are basically two possible ways of handling these residues: landfill after adequate treatment or recycling as a secondary material. The different types of treatment may be grouped into three categories: separation processes, solidification/stabilization, and thermal methods. These residues generally have limited applications, mainly due to the fact that they tend to contain large quantities of soluble salts (NaCl, KCl, calcium compounds), significant amounts of toxic heavy metals (Pb, Zn, Cr, Cu, Ni, Cd) in forms that may easily leach out, and trace quantities of very toxic organic compounds (dioxin, furans). The most promising materials for recycling this residue are ceramics and glass-ceramic materials. The main purpose of the present paper is to review the published literature in this field. A range of studies have been summarized in a series of tables focusing upon management strategies used in various countries, waste composition, treatment processes and possible applications.     

Percolation and batch leaching tests to assess release of inorganic pollutants from municipal solid waste incinerator residues

In this study, percolation and batch leaching tests were considered in order to characterize the behaviour of air pollution control (APC) residues produced in a municipal solid waste incinerator (MSWI) as a function of the liquid to solid ratio (L/S). This waste is hazardous, and taking into account their physical and chemical properties, leaching of contaminants into the environment is the main concern. In our work the leaching behaviour of toxic heavy metals (Pb, Zn, Cr, Ni and Cu) and inorganics associated with soluble salts (Na, K, Ca and Cl) was addressed. Although pH of the leaching solution is the most important variable, L/S may also play an important role in leaching processes. In our work, results from column and batch tests were compared in terms of concentration (mg/L) and releasing (mg/kg). The APC residues revealed to be hazardous according to both tests, and both Pb and Cl⁻ far exceeded the regulatory thresholds. The material exhibits high solubility, and when the liquid to solid ratio was high, more than 50% can be solubilised. The patterns of release may be in some cases availability or solubility controlled, and the former was easier to identify. When the results from column and batch experiments were compared by representing the cumulative released amounts (in mg/kg) as a function of L/S, both curves match for Zn, Ni, Cu, K, Na, Cl and Ca, but for Cr and Pb a significant difference was observed. In fact, the column experiments revealed that under percolation conditions it should be expected slow releasing of Pb along time. From this study, it can be concluded that the released amounts obtained in batch experiments for a certain L/S should be considered as the worst case for medium term. Some simple models proposed on the literature and based on local equilibrium assumption showed good fitting to experimental data for soluble species (non-reactive solutes).     

Biochemical effects of acetaminophen in aquatic species: edible clams Venerupis decussata and Venerupis philippinarum

Acetaminophen (paracetamol) is one of the most used pharmaceutical drugs, due to its antipyretic and analgesic properties that turn it into a primary choice in varied pathologies and conditions. However, and despite its massive use, acetaminophen is not exempt of adverse effects, especially when administered in over dosage, which are related to the formation of toxic metabolites by oxidative pathways. It is thus possible to observe that toxicity caused by acetaminophen is usually mediated by reactive oxygen species and can result in multiple effects, ranging from protein denaturation to lipid peroxidation and DNA damage. The occurrence of acetaminophen has been reported in the aquatic environment, being important to address the potential exertion of toxic effects on nontarget environmentally exposed organisms. The present study intended to characterize the effects of acute acetaminophen exposure on physiological traits (antioxidant defense, oxidative damage) of two species of bivalves, namely, the edible clams Venerupis decussata and Venerupis philippinarum. Results showed a significant increase in all oxidative stress biomarkers, evidencing the bioactivation of acetaminophen into a deleterious prooxidant, triggering the onset of deleterious effects. Furthermore, strong interspecific differences were observed among responses of the two tested species, which was a major issue due to intrinsic ecological implications when one considers that both species share the same habitat.     

Variable within-brood maternal provisioning in newly extruded embryos of Homarus gammarus

Offspring quality of decapod crustaceans has been widely studied, with special emphasis on the sources of variability determining embryonic and larval quality. Nevertheless, maternal provisioning has commonly been overlooked as a potential source of offspring within-brood variability. In the present study, the existence of variable maternal provisioning was assessed through the analysis of the fatty acid (FA) profile of newly extruded embryos from different regions of the brooding chamber of Homarus gammarus. Significant differences in the FA profile of embryos sampled from different pleopods and sides of the brooding chamber were recorded. Significant deviations of the overall mean of each surveyed female were also observed for essential FA, particularly 20:4n-6, 20:5n-3 and 22:6n-3. Lipid energy available to fuel embryogenesis also varied among embryos sampled from different regions of the brooding chamber. Results suggest variable female investment at oocyte production, which may be amplified during the incubation period of developing embryos by differential lipid catabolism. For the first time, maternal provisioning is evidenced as an additional source for within-brood variability in the FA profile of embryos.