Environmental performance evaluation of agro-industrial innovations – Part 2: methodological approach for performing vulnerability analysis of watersheds

Environmental vulnerability analysis has been sparsely used in environmental performance evaluation (EPE) of technological innovations. The present paper proposes a methodological approach to carry out vulnerability analysis of watersheds and to integrate this analysis into methods of environmental performance evaluation of agro-industrial innovations. This approach is applied to the Ambitec-Life Cycle method, described in Part 1 (this issue) of this study. The case study of green coconut substrate compared to ripe coconut substrate, also described in Part 1 (this issue), is now presented considering the vulnerability analysis of the watersheds where the life cycle stages of these products occur. The integration of vulnerability analysis in Ambitec-Life Cycle contributes to a better understanding of the environmental aspects of agro-industrial technological innovations with potential to cause significant impacts in watersheds where these innovations are implemented.     

Prenatal confirmation of trisomy 12 mosaicism by fetal skin biopsy

Trisomy 12 mosaicism diagnosed at 16 weeks' amniocentesis in a 42-year-old woman was not confirmed at 18 weeks' gestational age in amniotic fluid or fetal blood. Fetal skin biopsy performed at the same time did, however, allow the detection of trisomy 12 in 1 of 14 fibroblasts analysed. Fetal skin biopsy can be included within the diagnostic procedures to be performed when a level III mosaicism is found in the amniotic fluid.     

Persistent organochlorine compounds in soils and sediments of European high altitude mountain lakes

The composition of persistent organochlorine compounds (OC) in soils and sediments from two high altitude European mountain lakes, Redon in the Pyrenees and Ladove in the Tatra mountains, has been studied. Sediment cores from two additional lakes in the Tatra mountains, Starolesnianske Pleso and Dlugi Staw, have also been examined. DDTs (1.7-13 ng g(-1)) were the most abundant OC in soils followed by total polychlorobiphenyls (PCBs; 0.41-1.5 ng g(-1)) and hexachlorobenzene (HCB; 0.15-0.91 ng g(-1)). In sediments, the dominant OC were also DDTs (3.3-28 ng g(-1)) and PCBs (2.3-15 ng g(-1)). These concentrations are low, involving absence of major pollution sources in these high mountain regions. The downcore OC profiles in soils and sediments were similar but higher concentrations and steeper vertical gradients were observed in the latter. Radiometric determinations showed absence of significant OC transport from catchment to lake. The sediment-soil difference points therefore to a better retention of the OC load in sediments than soils which may be related to the low temperatures that are currently encountered at the bottom of the lake water column and the depletion of sediment bioturbation in these cold environments. Significant qualitative changes in the soil PCB distributions are observed downcore. These involve a dominance of the high molecular weight congeners in the top core sections and those of lower weight (i.e. less chlorinated) in the bottom. Anaerobic dechlorination of higher molecular weight congeners occurring in microsites, e.g. as observed in flooded or poorly drained soils, could be responsible for these changes. This process could be concurrent to bioturbation.     

Eco-Compatible Use of Olive Husk as Filler in Thermoplastic Composites

A study on the possibility of recycling waste materials, such as olive husk, the solid phase derived from an olive oil mill, in blend with thermoplastic polymers to produce new materials for manufacturer of, for example, containers and formworks, has been carried out. The present paper describes the methodology used for the preparation and the characterization of composite samples prepared by mixing various percentages of olive husk and polypropylene. A screening on the chemical-physical characteristics of the olive husk is reported, as well as a set of tests applied to evaluate the mechanical properties of the manufactured products obtained.     

Photoactivation and photoregeneration of TiO2/PAC mixture applied in suspension in water treatments: approach to a real application

Environmental Science and Pollution Research - The process TiO2/PAC/UV-vis has been under study and compared with the isolated treatments of adsorption and photocatalysis determining possible...     

The application of regenerable sorbents for mercury capture in gas phase

Mercury is a well-known toxic element, and flue gas streams emitted from coal-fired utilities are one of the largest anthropogenic sources of this element. This study briefly reviews the proposed technologies for reducing mercury emissions from coal combustion, focusing on an emerging process which involves the use of regenerable sorbents and especially those loaded with noble metals. Among the mercury species formed during coal combustion, elemental mercury is the most difficult to remove from the flue gases due to its low reactivity and insolubility in water. The widespread interest in using regenerable sorbents with metals is due to their ability to retain elemental mercury. With this technology, not only can efficiencies of 100 % be reached in the retention of elemental mercury but also a way to avoid the generation of new wastes loaded with mercury. This study considers the main aspects that must be taken into account when developing effective regenerable sorbents for mercury capture, with special attention to sorbents containing noble metals. The characteristics of this process are compared with those of other processes in a more advanced state of development.     

From green product definitions and classifications to the Green Option Matrix

Hybrid cars, recycled products, photovoltaic cells, bioplastics: why so different products can be called ‘green’? Which practices companies willing to develop green products should implement? How companies can easily and effectively communicate to stakeholders the environmental features of their green products? This paper tries to answer these questions, by developing a Green Option Matrix (GOM), which characterizes green products and practices along different dimensions. This matrix is then used to analyze the different features of green products as well as related green practices developed by a sample of companies belonging to the Dow Jones Sustainability World Index (DJSWI). Relevant data are collected by means of content analysis of companies’ websites and sustainability reports. Green products and practices developed by each company in the sample are positioned in the matrix and results are presented and discussed for each industrial sector. Then, different sectors’ behaviors are compared. The proposed matrix can be used by companies as a market tool to analyze competitors’ green products and practices and as a communication tool to effectively communicate to stakeholders the specific green features of their products and practices.     

Prenatal ultrasound diagnosis of frontonasal dysplasia

We report a case of prenatal ultrasound diagnosis of frontonasal dysplasia. This represents a very rare disorder involving the face (hypertelorism, median cleft lip, absence of the nasal tip) and often the central nervous system (CNS) (cranium bifidum occultum, ethmoidal cephalocele, agenesis of the corpus callosum). Although several of the typical anomalies are diagnosable by ultrasound in utero (hypertelorism, median cleft lip, anterior cephalocele), very few cases have been reported prenatally, the present being only the third. In the present case, hemimegalencephaly is first reported among the anomalies possibly associated with frontonasal dysplasia. The diagnosis was made at 22 weeks' gestation and was confirmed by necropsy following termination of pregnancy. Copyright © 2002 John Wiley & Sons, Ltd.