Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Treatment and use of air pollution control residues from MSW incineration: an overview

This work reviews strategies for the management of municipal solid waste incineration (MSWI) residues, particularly solid particles collected from flue gases. These tiny particles may be retained by different equipment, with or without additives (lime, activated carbon, etc.), and depending on the different possible combinations, their properties may vary. In industrial plants, the most commonly used equipment for heat recovery and the cleaning of gas emissions are: heat recovery devices (boiler, superheater and economiser); dry, semidry or wet scrubbers; electrostatic precipitators; bag filters; fabric filters, and cyclones. In accordance with the stringent regulations in force in developed countries, these residues are considered hazardous, and therefore must be treated before being disposed of in landfills. Nowadays, research is being conducted into specific applications for these residues in order to prevent landfill practices. There are basically two possible ways of handling these residues: landfill after adequate treatment or recycling as a secondary material. The different types of treatment may be grouped into three categories: separation processes, solidification/stabilization, and thermal methods. These residues generally have limited applications, mainly due to the fact that they tend to contain large quantities of soluble salts (NaCl, KCl, calcium compounds), significant amounts of toxic heavy metals (Pb, Zn, Cr, Cu, Ni, Cd) in forms that may easily leach out, and trace quantities of very toxic organic compounds (dioxin, furans). The most promising materials for recycling this residue are ceramics and glass-ceramic materials. The main purpose of the present paper is to review the published literature in this field. A range of studies have been summarized in a series of tables focusing upon management strategies used in various countries, waste composition, treatment processes and possible applications.     

Percolation and batch leaching tests to assess release of inorganic pollutants from municipal solid waste incinerator residues

In this study, percolation and batch leaching tests were considered in order to characterize the behaviour of air pollution control (APC) residues produced in a municipal solid waste incinerator (MSWI) as a function of the liquid to solid ratio (L/S). This waste is hazardous, and taking into account their physical and chemical properties, leaching of contaminants into the environment is the main concern. In our work the leaching behaviour of toxic heavy metals (Pb, Zn, Cr, Ni and Cu) and inorganics associated with soluble salts (Na, K, Ca and Cl) was addressed. Although pH of the leaching solution is the most important variable, L/S may also play an important role in leaching processes. In our work, results from column and batch tests were compared in terms of concentration (mg/L) and releasing (mg/kg). The APC residues revealed to be hazardous according to both tests, and both Pb and Cl⁻ far exceeded the regulatory thresholds. The material exhibits high solubility, and when the liquid to solid ratio was high, more than 50% can be solubilised. The patterns of release may be in some cases availability or solubility controlled, and the former was easier to identify. When the results from column and batch experiments were compared by representing the cumulative released amounts (in mg/kg) as a function of L/S, both curves match for Zn, Ni, Cu, K, Na, Cl and Ca, but for Cr and Pb a significant difference was observed. In fact, the column experiments revealed that under percolation conditions it should be expected slow releasing of Pb along time. From this study, it can be concluded that the released amounts obtained in batch experiments for a certain L/S should be considered as the worst case for medium term. Some simple models proposed on the literature and based on local equilibrium assumption showed good fitting to experimental data for soluble species (non-reactive solutes).     

Analysis of time-scaling properties in forest-fire sequence observed in Italy

The investigation of the temporal fluctuations in forest fires is an important topic in the context of environmental sciences. Time-scaling scale-invariant methodologies have been used to characterize the temporal properties of forest-fire sequences detected in the Italian territory. Our findings reveal that the fire sequences can be considered as fractal processes with a high degree of time-clusterization of the events. The time-clustering phenomenon is clearly visible from timescales of order of days. Furthermore the fire sequences observed with decreasing latitude tend to be more time-clusterized.     

Regional-scale meteorological characteristics of the Vento Norte phenomenon observed in Southern Brazil

Environmental Fluid Mechanics - The sudden increase in air temperature associated with strong gusty winds of northerly direction is a phenomenon occasionally observed during the cold season in the...     

Economic assessment of managing processionary moth in pine forests: a case-study in Portugal

This paper assesses the private and social profitability of current strategies for managing processionary moth (Thaumetopoea pityocampa) in Portuguese pine forests, looking at economic and environmental costs and benefits. Costs include the expenses for forest treatment and the social costs of threats to human health (dermatitis amongst others); benefits are assessed in terms of both revenue and social benefits such as carbon fixation and recreation. The evaluation was done using Cost Benefit Analysis (CBA) as an analytical framework. While this tool is currently applied to forest and environmental assessment and specific applications to pest management strategies are to be found in agricultural economics, rather few attempts have been made in the field of forest pest management. In order to assess and compare with--without options, a case-study was analysed for the Setúbal Peninsula, south of Lisbon, an area where extensive stands of maritime pine (Pinus pinaster) grow. The exercise has shown that CBA can be a valuable tool for assessing the economic and social profitability of pest management. The results demonstrate that the loss of revenues in the no-management option is not sufficient to make pest management profitable for private forest owners in the short-term. Conversely, a social profit is gained as pest management minimizes health risks for humans and avoids possible recreational losses.     

Amino and fatty acid dynamics of<Emphasis Type="Italic"> Lysmata seticaudata</Emphasis> (Decapoda: Hippolytidae) embryos during early and late reproductive season

The present study investigates amino and fatty acid dynamics of embryos of different-sized simultaneous hermaphrodite shrimp (SH) (Lysmata seticaudata) during early (ERS) and late reproductive seasons (LRS). A significant relative decrease in total amino acids and essential amino acids (EAA) was recorded (P<0.05) during the development of embryos produced by shrimp collected during ERS and LRS. The content of non-essential amino acids (NEAA) showed a smaller variation, without a marked decrease. During the last embryonic stage, the major EAAs of embryos were, in decreasing magnitude, lysine and arginine, while the major NEAAs were glutamic acid and valine. A substantial decrease in lipid content (P<0.05) was observed, and the quantitatively more important fatty acids were the saturates 16:0 and 18:0, the monounsaturates 18:1n-9 and 18:1n-7 and the polyunsaturates 20:4n-6 (arachidonic acid, ARA), 20:5n-3 (eicosapentaenoic acid, EPA) and 22:6n-3 (docosahexaenoic acid, DHA). Monounsaturates were used at a higher rate, and embryos produced by SH shrimp displayed similar consumption rates of saturated and polyunsaturated fatty acids. Considering individual fatty acids, no clear utilization pattern between different-sized SH shrimp in ERS and LRS was recorded. The inexistence of consistent differences between amino and fatty acid utilization during embryogenesis among different-sized SH shrimp in ERS and LRS emphasizes the variability affecting offspring in decapod crustaceans.Communicated by S.A. Poulet, Roscoff     

Differential responses of benthic microbes and meiofauna to fish-farm disturbance in coastal sediments

Bacterial and meiofaunal abundance and biomass and their response to the disturbance induced by fish-farm biodeposition were investigated from March to October 1997 on a monthly basis at two stations of the Gaeta Gulf (Tyrrhenian Sea, Mediterranean Sea). The biopolymeric fraction of the organic matter was characterized by high concentrations which was similar at both fish-farming-impacted and control stations. Similarly, bacteria accounted for a small fraction of the biopolymeric organic carbon (< 1%), while the contribution due to auto-fluorescent cell biomass (i.e. prokaryotic and eukaryotic cells displaying auto-fluorescence) to the total biopolymeric carbon was quantitatively negligible (< 0.1%). Benthic bacteria appear to be sensitive to organic enrichment as their abundance increased significantly beneath the cage, whilst numbers of meiofauna was lower than in the control. Changes occurred also in terms of individual nematode biomass that increased as result of the biodeposition. A particularly useful tool appeared to be represented by the ratio of benthic auto-fluorescent cells to bacterial abundance, bacteria to meiofaunal biomass and auto-fluorescent cells to meiofauna biomass. All these parameters described well the impact due to biodeposition on the benthic environment as their ratios displayed significantly higher values in farm sediments, but recovered rapidly (15 days) to values observed in the control (i.e. undisturbed conditions) immediately after cage removal. Changes observed in the present study highlight that the increased organic loading determined a shift of the relative contribution of the different benthic components to the total biopolymeric carbon, so that in highly impacted systems total benthic biomass becomes increasingly dominated by microbial components.     

Tracking the anthropogenic drivers of ecological impacts

Despite the pivotal role human factors (anthropogenic drivers) are presumed to play in global environmental change, substantial uncertainties and contradictory conclusions about them continue. We attempt to further discipline the human factors issue by estimating the effects of two anthropogenic drivers, population and affluence, on a wide variety of global environmental impacts, including greenhouse gas emissions, emissions of ozone depleting substances, and the ecological footprint. Population proportionately increases all types of impacts examined. Affluence typically increases impacts, but the specific effect depends on the type of impact. These findings refocus attention on population and material affluence as principal threats to sustainability and challenge predictions of an ameliorating effect of rising affluence on impacts.     

Subsoil TPH and other petroleum fractions-contamination levels in an oil storage and distribution station in north-central Mexico

Many oil industry related sites have become contaminated due to the activities characteristic of this industry, such as oil exploration and production, refining, and petro-chemistry. In Mexico, reported hydrocarbon spills for the year 2000 amounted to 185 203, equivalent to 6252 tons (PEMEX, 2000). The first step for the remediation of these polluted sites is to assess the size and intensity of the oil contamination affecting the subsoil and groundwater, followed by a health risk assessment to establish clean up levels. The aim of this work was to characterize the soil and water in a north-central Mexico Oil Storage and Distribution Station (ODSS), in terms of TPHs, gasoline and diesel fractions, BTEX, PAHs, MTBE, and some metals. Besides, measurements of the explosivity index along the ODSS were made and we describe and discuss the risk health assessment analysis performed at the ODSS, as well as the recommendations arising from it. Considering soils with TPH concentrations higher than 2000 mg kg⁻¹, the contaminated areas corresponding to the railway zone is about 12 776.5 m², to the south of the storage tanks is about 6558 m², and to the south of the filling tanks is about 783 m². Total area to be treated is about 20 107 m² (volume of 20 107 m³), considering 1 m depth.