Biomechanical pulping: a mill-scale evaluation

Mechanical pulping process is electrical energy intensive and results in low paper strength. Biomechanical pulping, defined as the fungal treatment of lignocellulosic materials prior to mechanical pulping, has shown at least 30% savings in electrical energy consumption, and significant improvements in paper strength properties compared to the control at a laboratory scale. In an effort to scale-up biomechanical pulping to an industrial level, 50 tons of spruce wood chips were inoculated with the best biopulping fungus in a continuous operation and stored in the form of an outdoor chip pile for 2 weeks. The pile was ventilated with conditioned air to maintain the optimum growth temperature and moisture throughout the pile. The control and fungus-treated chips were refined through a thermomechanical pulp mill (TMP) producing lightweight coated paper. The fungal pretreatment saved 33% electrical energy and improved paper strength properties significantly compared to the control. Since biofibers were stronger than the conventional TMP fibers, we were able to reduce the amount of bleached softwood kraft pulp by at least 5% in the final product. Fungal pretreatment reduced brightness, but brightness was restored to the level of bleached control with 60% more hydrogen peroxide. The economics of biomechanical pulping look attractive.     

Concurrent 2,4-D and triclopyr biomonitoring of backpack applicators, mixer/loader and field supervisor in forestry

Two herbicides, 2,4-D and triclopyr esters (application ratio 1.6:1 acid equivalents) were applied as a tank mix by a crew of 8 backpack sprayer applicators, a mixer/loader, and a field supervisor. The crew was employed in a conifer release program in northern California during the summer of 2002. Biomonitoring (urine, 24 h) utilized 2,4-D and triclopyr (a.e.) as rapidly excreted exposure biomarkers. The absorbed dosages of 2,4-D and triclopyr were calculated based upon cotton whole body suits and biomonitoring. Dosages based upon accumulation of the herbicides on body suits averaged 42.6 μg (a.e.) 2,4-D/kg-d and 8.0 μg (a.e.) triclopyr/kg-d. Six consecutive days of concurrent urine collections showed that backpack applicators excreted an average of 11.0 μg (a.e.) 2,4-D/kg-d and 18.9 μg (a.e.) triclopyr/kg-d. Estimates based upon curve fitting were 17.1 and 29.3 μg (a.e.)/kg-d, respectively. Results suggest that passive dosimetry for 2,4-D consistently overestimated the dosage measured using biomonitoring by a factor of 2-3 fold, while for triclopyr, passive dosimetry underestimated the absorbed dose based on biomonitoring by a factor of 2-4 fold.     

Persistence of organochlorine chemical residues in fish from the Tombigbee River (Alabama, USA): Continuing risk to wildlife from a former DDT manufacturing facility

Organochlorine pesticide and total polychlorinated biphenyl (PCB) concentrations were measured in largemouth bass from the Tombigbee River near a former DDT manufacturing facility at McIntosh, Alabama. Evaluation of mean p,p′- and o,p′-DDT isomer concentrations and o,p′- versus p,p′-isomer proportions in McIntosh bass indicated that DDT is moving off site from the facility and into the Tombigbee River. Concentrations of p,p′-DDT isomers in McIntosh bass remained unchanged from 1974 to 2004 and were four times greater than contemporary concentrations from a national program. Total DDT in McIntosh bass exceeded dietary effect concentrations developed for bald eagle and osprey. Hexachlorobenzene, PCBs, and toxaphene concentrations in bass from McIntosh also exceeded thresholds to protect fish and piscivorous wildlife. Whereas concentrations of DDT and most other organochlorine chemicals in fish have generally declined in the U.S. since their ban, concentrations of DDT in fish from McIntosh remain elevated and represent a threat to wildlife.     

Assessing exposure to allied ground troops in the Vietnam War: A quantitative evaluation of the Stellman Exposure Opportunity Index model

The Exposure Opportunity Index (EOI) is a proximity-based model developed to estimate relative exposure of ground troops in Vietnam to aerially applied herbicides. We conducted a detailed quantitative evaluation of the EOI model by using actual herbicide spray missions isolated in time and space. EOI scores were calculated for each of 36 hypothetical receptor location points associated with each spray mission for 30 herbicide missions for two time periods – day of herbicide application and day 2–3 post-application. Our analysis found an enormous range of EOI predictions with 500–1000-fold differences across missions directly under the flight path. This quantitative examination of the EOI suggests that extensive testing of the model’s code is warranted. Researchers undertaking development of a proximity-based exposure model for epidemiologic studies of either Vietnam veterans or the Vietnamese population should conduct a thorough and realistic analysis of how precise and accurate the model results are likely to be and then assess whether the model results provide a useful basis for their planned epidemiologic studies.     

Amphibians and agricultural chemicals: Review of the risks in a complex environment

Agricultural landscapes, although often highly altered in nature, provide habitat for many species of amphibian. However, the persistence and health of amphibian populations are likely to be compromised by the escalating use of pesticides and other agricultural chemicals. This review examines some of the issues relating to exposure of amphibian populations to these chemicals and places emphasis on mechanisms of toxicity. Several mechanisms are highlighted, including those that may disrupt thyroid activity, retinoid pathways, and sexual differentiation. Special emphasis is also placed on the various interactions that may occur between different agro-chemicals and between chemicals and other environmental factors. We also examine the indirect effects on amphibian populations that occur when their surrounding pond communities are altered by chemicals.     

Back-extrapolation of estimates of exposure from current land-use regression models

Land use regression has been used in epidemiologic studies to estimate long-term exposure to air pollution within cities. The models are often developed toward the end of the study using recent air pollution data. Given that there may be spatially-dependent temporal trends in urban air pollution and that there is interest for epidemiologists in assessing period-specific exposures, especially early-life exposure, methods are required to extrapolate these models back in time. We present herein three new methods to back-extrapolate land use regression models. During three two-week periods in 2005–2006, we monitored nitrogen dioxide (NO₂) at about 130 locations in Montreal, Quebec, and then developed a land-use regression (LUR) model. Our three extrapolation methods entailed multiplying the predicted concentrations of NO₂ by the ratio of past estimates of concentrations from fixed-site monitors, such that they reflected the change in the spatial structure of NO₂ from measurements at fixed-site monitors. The specific methods depended on the availability of land use and traffic-related data, and we back-extrapolated the LUR model to 10 and 20 years into the past. We then applied these estimates to residential information from subjects enrolled in a case–control study of postmenopausal breast cancer that was conducted in 1996.Observed and predicted concentrations of NO₂ in Montreal decreased and were correlated in time. The estimated concentrations using the three extrapolation methods had similar distributions, except that one method yielded slightly lower values. The spatial distributions varied slightly between methods. In the analysis of the breast cancer study, the odds ratios were insensitive to the method but varied with time: for a 5 ppb increase in NO₂ using the 2006 LUR the odds ratio (OR) was about 1.4 and the ORs in predicted past concentrations of NO₂ varied (OR～1.2 for 1985 and OR～1.3–1.5 for 1996). Thus, the ORs per unit exposure increased with time as the range and variance of the spatial distributions decreased, and this is due partly to the regression coefficient being approximately inversely proportional to the variance of exposure. Changing spatial variability complicates interpretation and this may have important implications for the management of risk. Further studies are needed to estimate the accuracy of the different methods.     

Effects of Sea-Level Rise and Anthropogenic Development on Priority Bird Species Habitats in Coastal Georgia, USA

We modeled changes in area of five habitats, tidal-freshwater forest, salt marsh, maritime shrub-scrub (shrub), maritime broadleaf forest (oak) and maritime narrowleaf (pine) forest, in coastal Georgia, USA, to evaluate how simultaneous habitat loss due to predicted changes in sea level rise (SLR) and urban development will affect priority bird species of the south Atlantic coastal plain by 2100. Development rates, based on regional growth plans, were modeled at 1% and 2.5% annual urban growth, while SLR rates, based on the Intergovernmental Panel on Climate Change’s A1B mean and maximum scenarios, were modeled at 52 cm and 82 cm, respectively. SLR most greatly affected the shrub habitat with predicted losses of 35–43%. Salt marsh and tidal forest also were predicted to lose considerable area to SLR (20–45 and 23–35%, respectively), whereas oak and pine forests had lesser impact from SLR, 18–22% and 11–15%, respectively. Urban development resulted in losses of considerable pine (48–49%) and oak (53–55%) habitat with lesser loss of shrub habitat (21–24%). Under maximum SLR and urban growth, shrub habitat may lose up to 59–64% compared to as much as 62–65% pine forest and 74–75% oak forest. Conservation efforts should focus on protection of shrub habitat because of its small area relative to other terrestrial habitats and use by Painted Buntings (Passerina ciris), a Partners In Flight (PIF) extremely high priority species. Tidal forests also deserve protection because they are a likely refuge for forest species, such as Northern Parula and Acadian Flycatcher, with the decline of oak and pine forests due to urban development.     

Differential survival and reproductive performance across three mitochondrial lineages in Melita plumulosa following naphthalene exposure

Populations subject to anthropogenic contaminants often display altered patterns of genetic variation, including decreased genetic variability. Selective pressures of contaminant exposure are also reflected in differential tolerance between genotypes. An industrial chemical spill in a major eastern Australian waterway in July 2006 resulted in altered patterns of genetic variability in a nearby population of the amphipod, Melita plumulosa for up to one year post-spill, despite the site being declared clean after 48 h. Here, we investigate the toxicant response of three mitochondrial lines naturally occurring at the impacted site by comparing survivorship and life-history trait variables following naphthalene exposure. Overall, M. plumulosa demonstrated differential survivorship between mitochondrial lines under exposure to high concentrations of naphthalene. In addition, we identified differential fecundity and frequencies of gravidity in female amphipods between the mitochondrial haplotypes examined. These findings suggest that the patterns of genetic variability previously identified may be linked with differential tolerance and/or reproductive performance between mitochondrial lineages.     

Challenges with tracing the fate and speciation of mine-derived metals in turbid river systems: implications for bioavailability

The fast-flowing and highly turbid Lagaip River (0.5–10 g/L suspended solids) in the central highlands of Papua New Guinea receives mine-derived metal inputs in both dissolved and particulate forms. Nearest the mine, metal concentrations in suspended solids were 360, 9, 90, 740 and 1,300 mg/kg for As, Cd, Cu, Pb and Zn, while dissolved concentrations were 2.7, 0.6, 3.1, 0.1 and 25 μg/L, respectively. This creates a significant metal exposure source for organisms nearer the mine. However, because the Lagaip River is diluted by a large number of tributaries, the extent to which mine-derived metals may affect biota in the lower catchments is uncertain. To improve our understanding of the forms of potentially bioavailable metals entering the lower river system, we studied the partitioning and speciation of metals within the Lagaip River system. Dissolved and particulate metal concentrations decreased rapidly downstream of the mine due to dilution from tributaries. As a portion of the particulate metal concentrations, the more labile dilute acid-extractable forms typically comprised 10–30 % for As and Pb, 50–75 % for Cu and Zn, and 50–100 % for Cd. Only dissolved Cd, Cu and Zn remained elevated relative to the non-mine-impacted tributaries (<0.03, 0.5 and 0.3 μg/L), but the concentrations did not appreciably change with increasing dilution downriver. This indicated that release of Cd, Cu and Zn was likely occurring from the more labile metal phases of the mine-derived particulates. Chelex-labile metal analyses and speciation modelling indicated that dissolved copper and lead were largely non-labile and likely complexed by naturally occurring organic ligands, while dissolved cadmium and zinc were predominantly present in labile forms. The study confirmed that mine-derived particulates may represent a significant source of dissolved metals in the lower river system; however, comparison with water quality guidelines indicates the low concentrations would not adversely affect aquatic life.