Winter survival of microbial contaminants in soil:An in situ verification

The aim of the research was to evaluate, at site scale, the influence of freezing and freeze/thaw cycles on the survival of faecal coliforms and faecal enterococci in soil, in a climate change perspective. Before the winter period and during grazing, viable cells of faecal coliforms and faecal enterococci were detected only in the first 10 cm below ground, while,after the winter period and before the new seasonal grazing, a lower number of viable cells of both faecal indicators was detected only in some of the investigated soil profiles, and within the first 5 cm. Taking into consideration the results of specific investigations, we hypothesise that the non-uniform spatial distribution of grass roots within the studied soil can play an important role in influencing this phenomenon, while several abiotic factors do not play any significant role. Taking into account the local trend in the increase of air temperature, a different distribution of microbial pollution over time is expected in spring waters, in future climate scenarios. The progressive increase in air temperature will cause a progressive decrease in freeze/thaw cycles at higher altitudes, minimising cold shocks on microbial cells, and causing spring water pollution also during winter.     

Learning lessons from the 2011 Van Earthquake to enhance healthcare surge capacity in Turkey

Historically, Turkey has adopted a reactive approach to natural hazards which resulted in significant losses. However, following the 1999 Kocaeli Earthquake, a more proactive approach has been adopted. This study aims to explore the way this new approach operates on the ground. A multinational and multidisciplinary team conducted a field investigation following the 2011 Van Earthquake to identify lessons to inform healthcare emergency planning in Turkey and elsewhere. The team interviewed selected stakeholders including, healthcare emergency responders, search and rescue services, ambulance services, and health authority representatives, in addition to conducting a focus group. Data were analysed according to an open coding process and SWOT (strength, weakness, opportunity, and threat) analysis. The findings suggest that the approach succeeded in developing a single vision by consolidating official efforts in a more structured way, mobilising many governmental and non-governmental organisations, securing significant amounts of resources including physical and human, and increasing the resilience and flexibility of infrastructure to expand its capacity. However, more attention is required to the development of stronger management procedures and acquisition of further resources.     

Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery

The present lab-scale experimental study presents the process of leaching waste printed circuit boards (WPCBs) in order to recover gold by thioureation. Preliminary tests have shown that copper adversely affects gold extraction; therefore an oxidative leaching pre-treatment was performed in order to remove base metals. The effects of sulfuric acid concentration, hydrogen peroxide volume and temperature on the metal extraction yield were studied by analysis of variance (ANOVA). The highest copper extraction yields were 76.12% for sample A and 18.29% for sample D, after leaching with 2 M H₂SO₄, 20 ml of 30% H₂O₂ at 30 °C for 3 h. In order to improve Cu removal, a second leaching was performed only on sample A, resulting in a Cu extraction yield of 90%. Other experiments have shown the negative effect of the stirring rate on copper dissolution. The conditions used for the process of gold extraction by thiourea were: 20 g/L thiourea, 6 g/L ferric ion, 10 g/L sulfuric acid, 600 rpm stirring rate. To study the influence of temperature and particle size, this process was tested on pins manually removed from computer central processing units (CPUs) and on waste CPU for 3½ h. A gold extraction yield of 69% was obtained after 75% of Cu was removed by a double oxidative leaching treatment of WPCBs with particle sizes smaller than 2 mm.     

Assessment of the Water Quality of the River Arno in the Area of Florence, Italy

The quality of the waters collected from R. Arno was examined in the period September 1988 to December 1989. A first campaign in September/October 1988, during a period of low water, gives a general picture of pollution conditions along the river from the source to the mouth. the river appears to be heavily polluted immediately downstream of Florence and in the area of the textile industry.

In the second campaign, through the whole year 1989, particular attention has been given to the Florence area; the most significant results, compared with those from a previous investigation carried out in 1971, show only a small reduction of the pollution load, due to the shortage and inadequacy of wastewater depuration. Some considerations are reported on pollution drop with full spate.     

Atmospheric bulk deposition to the lagoon of Venice Part I. Fluxes of metals, nutrients and organic contaminants

First available data on atmospheric fall-out were provided by sampling monthly bulk depositions in four sites inside the Lagoon of Venice (550 km2). Sampling was carried out monthly during the period July 1998-July 1999, in one site near an industrial area (Porto Marghera; site D), another site in the city of Venice (site A), and the remaining two in the southern- and northernmost ends of the Lagoon (Valle Figheri, site C; Valle Dogà site B). The following determinations were carried out for each samples: pH, conductivity, grain-size, particulate load, and dissolved nutrients (N, P). Samples were then subdivided into soluble and insoluble fractions, and Al, Ca, Na, K, Mg, Si, Mn, Fe, Zn, Ni, Cr, Cu, Pb, Cd, As, Hg, Ti, V, S, P, Se and Sb were analysed on both fractions. Total organic micropollutants (PAH, PCB, HCB, DDT, PCDD/F) were measured. As regards particle size distribution, there was great variability among sampling sites. The percentage of the < or =2 microm grain-size fraction was higher in the southern and northern ends of the Lagoon. Small differences were found among sites for major elements, whereas higher variability was observed for inorganic and organic micropollutants, with standard deviations between 20% and 60% of the fluxes measured. Major differences in annual fluxes between the most polluted sites (mostly D and A) and background (site B) were seen for Cd (0.26 vs. 0.06 mg m(-2) year(-1)), Hg (41 vs. 15 microg m(-2) year(-1)), PCB ( approximately 2500 vs. approximately 500 ng m(-2) year(-1)) and HCB ( approximately 8000 vs. approximately 1000 ng m(-2) year(-1)). Comparisons with previous data, collected in the periods 1993-1994 and 1995-1997, were only available for a few trace metals. A definite decline in the annual Pb flux in the city of Venice was detected, from 18 to 13 mg m(-2) in 1996/1997 and 1995/1996 respectively, to approximately 5 mg m(-2) in the present study. Total annual deposition was calculated by means of two different methods, which gave very similar results: (i) the mean value of deposition in the four sites was multiplied by lagoon area (550 km2); (ii) the monthly rain isopleths were combined to normalize deposition values. The figures are: 15-34 kg of Hg and Sb, approximately 200 kg of As, approximately 100 kg of Cd and PAH, 0.7-1.3 tons of Cr, Ni and V, more than 2 tons of Cu and Pb, 17 of Zn, 55 of total P, approximately 200 of Al, and 3900 of DIN. Total fluxes of organics inside the lagoon were: PAH approximately 100 kg; HCB approximately 1 kg; DDT approximately 0.4 kg. PCB and PCDD/F fluxes were approximately 500 g and approximately 10 g, corresponding respectively to 0.1 and 0.4 g I-TE. The correlations between fluxes of inorganic micropollutants and grain-size were significant. Multivariate statistical analysis was applied to investigate more accurately relationships between the insoluble and dissolved fractions of inorganic micropollutants and grain-size fractions. In particular, significant correlations were highlighted between the dissolved fraction of As and the < or =1 mum particle size fraction. Relations between levels of SigmaPCDDF, SigmaPCDD, PCB and PAH congeners and grain-size revealed significant correlation coefficients for the remote sites (B, C), and none in the urban and industrial sites (A, D). In particular, significant correlations were highlighted between SigmaPCDDF, SigmaPCDD and particle size fraction < or =2 mum, and between benzo(a)pyrene and PCB 167 and particle size fraction 4-8 mum.     

The composition and relationships between trace element levels in inhalable atmospheric particles (PM10) and in leaves of Nerium oleander L. and Lantana camara L

In order to evaluate the composition of inhalable atmospheric particles and to study the relationship between trace element levels in PM10 and in leaves of two plant species, the amount of Ba, Cu, Fe, Mn, Pb, Ti and V were analysed in PM10 and in Nerium oleander L. and Lantana camara L. leaves from two sites in the city of Seville and one remote control site. In PM10, the Cu and Fe content was significantly lower (p<0.05) in the control site than in the other sites. No correlations between leaf content and air content were found for the elements in L. camara. On the contrary, positive and significant correlations (p<0.05) were found between leaf content of N. oleander and PM10 content for Cu and Fe. The data suggest that N. oleander can be used in atmospheric biomonitoring studies, because it is especially useful for Cu and Fe, N. oleander being a better indicator than L. camara.