A two-dimensional model for simulating the transport and fate of toxic chemicals in a stratified reservoir

A two-dimensional reservoir toxics model is essential to establishing effective water resources management and protection. In a reservoir, the fate of a toxic chemical is closely connected with flow regimes and circulation patterns. To better understand the kinetic processes and persistence and predict the dissipation of toxic contaminants in the reservoir during a spill or storm runoff event, a toxics submodel was developed and incorporated into an existing laterally integrated hydrodynamics and transport model. The toxics submodel describes the physical, chemical, and biological processes and predicts unsteady vertical and longitudinal distributions of a toxic chemical. The two-dimensional toxicant simulation model was applied to Shasta Reservoir in California to simulate the physico-chemical processes and fate of a volatile toxic compound, methyl isothiocyanate (MITC), during a chemical spill into the Sacramento River in 1991. The predicted MITC concentrations were compared with those observed. The effect of reservoir flow regimes on the transport and fate of the toxic substance was investigated. The results suggested that the persistence of MITC is significantly influenced by different flow regimes. Methyl isothiocyanate is more persistent in the reservoir under an interflow condition due to reduced volatilization from deep layers than under an overflow condition. In the overflow situation, the plume moved more slowly toward the dam and experienced greater dissipation. This analysis can assist in toxic spill control and reservoir management, including field sampling and closure of water intakes.     

Relationship between water repellency and native and petroleum-derived organic carbon in soils

Some soils develop severe and persistent water repellency following contamination with crude oil. This study was conducted to characterize and compare the spatial distribution of soil water repellency and residual oil contamination at 12 such sites. The molarity of ethanol droplet (MED) test was used to assess soil water repellency and the content of dichloromethane-extractable organics (DEO) was used to quantify residual oil in soil. We found a relatively strong positive correlation between MED and DEO in soil (r2 = 0.74). Both variables tended to decrease abruptly with depth at 11 of the 12 study sites. Dichloromethane-extractable organics similarly decreased with depth in control adjacent soil (MED = 0 M), but from an average concentration one to two orders of magnitude lower than in water-repellent soil. Using data from corresponding control adjacent and water-repellent soils, we determined that approximately 29 and 10% of measured total organic carbon in water-repellent A- and B-horizon soil, respectively, consists of dichloromethane-insoluble organic carbon of petroleum origin. We propose that this fraction contains most of the causative agents of soil water repellency at the studied sites.     

Comparison of dioxin and furan TEQ determination in contaminated soil using chemical,micro-EROD,and immunoassay analysis

High resolution mass spectrometry gas chromatography (GC/MS) is the standard method for dioxin and furan analysis in environmental matrices. Considered as very accurate, this method is however time consuming and expensive. Methods based on biological interactions have the necessary sensitivity but began only recently to be investigated in the context of environmental applications. We have compared dioxin and furan toxicity levels (expressed as toxic equivalent quantities (TEQs)) in soil samples by three analytical approaches: the micro-ethoxyresorufin-o-deethylase (EROD) bioassay (a receptor-based method), an immunoassay (antibody-based method) and GC/MS analysis (used as a reference) using a shortened extraction-purification method. Both biological methods were sensitive to interferences from compounds co-extracted from samples. Most samples were underestimated by the immunoassay and, at a greater extent, overestimated by the EROD bioassay. The average accuracy of TEQ estimation (86 +/- 45% of values established by GC/MS) and the absence of false-negatives showed by the immunoassay suggest the usefulness of this method for semi-quantitative, preliminary characterization of potentially contaminated sites.     

Environmental management of the Colorado River within the Grand Canyon

Irreversible environmental changes are occurring along the Colorado River in the Grand Canyon as a result of regulation of the river flow by the Glen Canyon Dam. The questions of primary importance in managing this great natural resource are 1) in what manner and how rapidly are the physical and ecological adjustments taking place, and 2) is the increased use of the river for recreational boating contributing to the degradation? Human use along the Colorado River is limited, for the most part, to the relic, pre-dam fluvial deposits colloquially called “beaches.” With the new river regime these deposits are positioned well above the present high-water stage, 27,000 cubic feet/second (cfs), or 765 cubic meters/second (cms), so they are not replenished periodically as they were prior to construction of the dam in 1963. The dominant natural processes now are aeolian sand transport and mass wasting. The float-trip passengers use the river beaches for hiking, camping, and. lunch stops. At the most desirable sites thirty to forty people camp on the beaches each night over a four to five month season. Human impact includes incorporation of campsite litter, burial of chemically treated waste, and the direct stress associated with people walking on the vegetation and unstable sedimentary deposits. Results of our investigations indicate that the rate of degradation at the most heavily used sites exceeds the capacity of aeolian processes to reestablish natural landscapes. Therefore, careful management of float trjps is needed if these environments are to be maintained in a natural state rather than a “sand-box” state.     

REGIONAL DETECTION OF CHANGE IN WATER QUALITY VARIABLES1

ABSTRACT: The detection of change in a hydrologic varaible, particularly water quality, is a current problem. A method is presented for testing whether there has been a shift in the mean of a hydrologic variable based on the well established bivariate normal distribution theory. In this technique, the dependent, or target, and the independent, or control, variables are formed as weighted linear combinations of the mean values at a number of locations in a selected target and control area. The weighting factors are determined based on a mathematical programming technique which minimizes the conditional coefficient of variation thereby minimizing the number of observations required to detect a change of a preselected magnitude in the mean of the target area. The result is a situation where a savings in the number of observations required to detect a change is a consequence of adding more stations: the space-time tradeoff. Two applications of the technique are presented, the first using electrical conductivity (EC) data from two sets of river basins and the second using EC data from a set of basins as the target variable and annual discharge as the control. The results indicate that a significant savings in time can be achieved by using this method.     

Spatial allocation of material flow analysis in residential developments: a case study of Kildare County,Ireland

Studies of urban metabolism provide important insights for environmental management of cities, but are not widely used in planning practice due to a mismatch of data scale and coverage. This paper introduces the Spatial Allocation of Material Flow Analysis (SAMFA) model as a potential decision support tool aimed as a contribution to overcome some of these difficulties and describes its pilot use at the county level in the Republic of Ireland. The results suggest that SAMFA is capable of identifying hotspots of higher material and energy use to support targeted planning initiatives, while its ability to visualise different policy scenarios supports more effective multi-stakeholder engagement. The paper evaluates this pilot use and sets out how this model can act as an analytical platform for the industrial ecology–spatial planning nexus.     

Ten ways remote sensing can contribute to conservation

In an effort to increase conservation effectiveness through the use of Earth observation technologies, a group of remote sensing scientists affiliated with government and academic institutions and conservation organizations identified 10 questions in conservation for which the potential to be answered would be greatly increased by use of remotely sensed data and analyses of those data. Our goals were to increase conservation practitioners’ use of remote sensing to support their work, increase collaboration between the conservation science and remote sensing communities, identify and develop new and innovative uses of remote sensing for advancing conservation science, provide guidance to space agencies on how future satellite missions can support conservation science, and generate support from the public and private sector in the use of remote sensing data to address the 10 conservation questions. We identified a broad initial list of questions on the basis of an email chain‐referral survey. We then used a workshop‐based iterative and collaborative approach to whittle the list down to these final questions (which represent 10 major themes in conservation): How can global Earth observation data be used to model species distributions and abundances? How can remote sensing improve the understanding of animal movements? How can remotely sensed ecosystem variables be used to understand, monitor, and predict ecosystem response and resilience to multiple stressors? How can remote sensing be used to monitor the effects of climate on ecosystems? How can near real‐time ecosystem monitoring catalyze threat reduction, governance and regulation compliance, and resource management decisions? How can remote sensing inform configuration of protected area networks at spatial extents relevant to populations of target species and ecosystem services? How can remote sensing‐derived products be used to value and monitor changes in ecosystem services? How can remote sensing be used to monitor and evaluate the effectiveness of conservation efforts? How does the expansion and intensification of agriculture and aquaculture alter ecosystems and the services they provide? How can remote sensing be used to determine the degree to which ecosystems are being disturbed or degraded and the effects of these changes on species and ecosystem functions?     

Toxicity of carbaryl,diquat dibromide,and fluoranthene,individually and in mixture,to larval grass shrimp,Palaemonetes pugio

This study examined the toxicity of two pesticides (carbaryl and diquat dibromide) and one polycyclic aromatic hydrocarbon (fluoranthene), both singly and in mixture, to grass shrimp larvae (Palaemonetes pugio). These three chemicals are all present in coastal environments and can easily enter estuarine ecosystems. Fluoranthene was the most toxic chemical with a 96-h LC₅₀ value of 32.45 μ g/L, followed by carbaryl (43.02 μ g/L) and diquat dibromide (1624 μ g/L). In the chemical mixture tests, the binary carbaryl/diquat dibromide mixture and the ternary carbaryl/diquat dibromide/fluoranthene mixture had additive results.     

Climate change mitigation policy paradigms—national objectives and alignments

The aim of this paper is to assess how policy goals in relation to the promotion of green growth, energy security, pollution control and greenhouse gas (GHG) emissions reductions have been aligned in policies that have been implemented in selected countries during the last decades as a basis for discussing how a multi objective policy paradigm can contribute to future climate change mitigation. The paper includes country case studies from Brazil, Canada, China, the European Union (EU), India, Japan, Mexico, Nigeria, South Africa, South Korea and the United States covering renewable energy options, industry, transportation, the residential sector and cross-sectoral policies. These countries and regions together contribute more than two thirds of global GHG emissions. The paper finds that policies that are nationally driven and that have multiple objectives, including climate-change mitigation, have been widely applied for decades in both developing countries and industrialised countries. Many of these policies have a long history, and adjustments have taken place based on experience and cost effectiveness concerns. Various energy and climate-change policy goals have worked together in these countries, and in practice a mix of policies reflecting specific priorities and contexts have been pursued. In this way, climate-change mitigation has been aligned with other policy objectives and integrated into broader policy packages, though in many cases specific attention has not been given to the achievement of large GHG emission reductions. Based on these experiences with policy implementation, the paper highlights a number of key coordination and design issues that are pertinent to the successful joint implementation of several energy and climate-change policy goals.