Temperature enhanced effects of chlorine exposure on the health status of the sentinel organism Mytilus galloprovincialis

It now is widely recognised that the global temperature is rising, a phenomenon which could alter the effects of pollution on wildlife. In order to assess the role of temperature and exposure to chlorine due to cooling water discharges, a battery of metabolic, oxidative stress and histological parameters were evaluated in Mytilus galloprovincialis after 15 and 30 days at 15 °C and at two increased temperatures (+5 and +10 °C). Diverse gill pathologies such as haemolymphatic sinus dilatation, an increased number of mucocytes and granulocytes as well as a lower number of cilia were observed after 30 days exposure at higher temperatures. Protein, amino acid, triglyceride and fatty acid levels decreased when the temperature increased, as a consequence of higher energetic demand. Similarly, acetylcholinesterase, catalase and glutathione S-transferase activities showed an inhibition at higher temperatures, although gill lipid peroxidation levels remained unaffected. Our results suggest that increased temperatures induce deterioration in the health status of the mussels and in their defensive capacity against a polluted environment.     

Particle size distribution and its relationship to black carbon in two urban and one rural site in Santiago de Chile

The size distribution of particles has been studied in three sites in the Metropolitan area of Santiago de Chile in the winter of 2009 and a comparison with black carbon was performed. Two sites are located near busy streets in Santiago and the other site is located in a rural area about 40 km west of Santiago with little influence from vehicles, but large influence from wood burning. The campaign lasted 1 or 2 weeks in each site. We have divided the particle size measurements into four groups (10–39 nm, 40–62 nm, 63–174 nm, and 175–700 nm) in order to compare with the carbon monitor. In the sites near the street, black carbon has a high correlation (R ? 0.85) with larger particles (175–700 nm). The correlation decreased when black carbon was compared with smaller particles, having very small correlation with the smallest sizes (10–39 nm). In the rural site, black carbon also has a high correlation (R = 0.86) with larger particles (175–700 nm), but the correlation between black carbon and the finest particles (10–39 nm) decreases to near 0. These measurements are an indication that wood burning does not generate particles smaller than ?50 nm. In the urban sites, particle size distribution is peaked toward smaller particles (10–39 nm) only during rush hours, but at other times, particles size distribution is peaked toward larger sizes. When solar radiation was high, evidence of secondary particle formation was seen in the rural site, but not in the urban sites. The correlation between the number of secondary particles and solar radiation was R² = 0.46, indicating that it there may be other variables that play a role in ultrafine particle formation.

Implications:A study of the size distribution of particles and black carbon concentration in two street sites and one rural site shows that in the last site the number of particles ultrafine particles (d < 40 nm) is 10 times lower but the number of larger particles is about 2 times lower. Thus, the rural site has less of the particles that are more dangerous to health. The number of ultrafine particles is mostly associated with traffic, while the number of larger particles is associated with wood burning and other sources. Wood burning does not generate particles smaller than ?50 nm.     

LC–ICP–MS analysis of arsenic compounds in dominant seaweeds from the Thermaikos Gulf (Northern Aegean Sea,Greece)

The content of total arsenic and arsenic compounds in the dominant seaweed species in the Thermaikos Gulf, Northern Aegean Sea was determined in samples collected in different seasons. Total arsenic was determined by acid digestion followed by ICP–MS. Arsenic speciation was analyzed by water extraction followed by LC–ICP–MS. Total arsenic concentrations in the seaweeds ranged from 1.39 to 55.0 mg kg⁻¹. Cystoseira species and Codium fragile showed the highest total As contents, while Ulva species (U. intestinalis, U. rigida,U. fasciata) had the lowest Arsenosugars, the most common arsenic species in seaweeds, were found in all samples, and glycerol-arsenosugar was the most common form; however, phosphate-arsenosugar and sulfate-arsenosugar were also present. Inorganic arsenic was measured in seven algae species and detected in another. Arsenate was the most abundant species in Cystoseira barbata (27.0 mg kg⁻¹). Arsenobetaine was measured in only one sample. Methylated arsenic species were measured at very low concentrations. The information should contribute to further understanding the presence of arsenic compounds in dominant seaweeds from the Thermaikos Gulf.     

Carbon monoxide concentrations in Santiago City at street levels and their vertical gradient

Carbon monoxide concentrations were measured at ground level (1 m) near heavy traffic streets in downtown Santiago de Chile in periods of low (November and December), intermediate (April) and high (May) ambient concentrations. Also, measurements were carried out at several heights (from 1 to 127 m) in Santiago’s main street during winter time. Measurements carried out at ground level show maximum values during the morning rush hour, with values considerably higher than those reported by the urban air quality network, particularly in summer time. However, the measured values are below air quality standards. Vertical CO profiles were measured in a tower located in the center of downtown. Below 40 m (average altitude of neighboring buildings), the profiles do not show a consistent vertical gradient, with CO concentrations increasing or decreasing with height, regardless of atmospheric stability. In this low altitude range, the observed vertical profiles are poorly predicted by a street canyon model, and the measured concentrations can not be described by a simple exponential decay. At higher altitudes (40 and 127 m) a negative gradient in CO concentrations is observed, both for stable and unstable atmospheric conditions. The values of CO measured at 127 m are relatively well described by an Eulerian dispersion model running with current CO emission inventories for Santiago, although this model tends to predict stepper CO gradients than the observed ones.     

Preparation and characterization of carbon-enriched coal fly ash

Carbon-enriched fractions have been obtained from two coal fly ash (FA) samples. The FA came from two pulverized-coal fired power stations (Lada and Escucha, Spain) and were collected from baghouse filters. Sieving was used to obtain carbon-enriched fractions, which were further subjected to two beneficiation processes: acid demineralization using HCl and HF, and oil agglomeration using soya oil-water. Yield in weight after sieving, unburned carbon content, and several physicochemical characteristics of the obtained fractions were used to compare the performance of the beneficiation methods. Low carbon concentration was obtained by sieving, particularly in the case of Escucha FA. However, after acid demineralization or oil agglomeration, fractions containing unburned carbon in a range of 63% to 68% were obtained. These fractions showed differences in mineral phase composition and distribution depending on the FA and on the beneficiation method used. The textural properties of the obtained fractions varied as a function of their carbon content and the beneficiation method used. However, no significant differences in morphology of the carbonaceous particles were found.     

Suitability of a magnetic particle immunoassay for the analysis of PBDEs in Hawaiian euryhaline fish and crabs in comparison with gas chromatography/electron capture detection-ion trap mass spectrometry

A gas chromatograph/electron capture detector-ion trap mass spectrometer (GC/ECD-ITMS) was used for the determination of polybrominated diphenyl ethers (PBDEs) in euryhaline fish and crabs. GC/ECD-ITMS results showed that average recoveries from the spiked fish samples are in a range of 58-123% with relative standard deviations (RSDs) of 5-19%. PBDE concentrations obtained from GC/ECD-ITMS ranged from 28 ng/g to 1845 ng/g lipid weight (lw) in all aquatic species collected from Hawaiian brackish waters. The general BDE congener concentration profile observed in this study is BDE-47 > BDE-100 > BDE-154 > BDE-99 > BDE-153 > BDE-28 > BDE-183. The ELISA results expressed as BDE-47 equivalents correlated well with those of GC/ECD-ITMS, with a correlation coefficient (R² = 0.68) and regression coefficient (slope = 0.82). Comparison of ELISA with GC/ECD-ITMS results demonstrated that ELISA provides a timely and cost-effective method to screen PBDEs in fish and crab samples.     

Effect of Mediterranean shrub on water erosion control

In the Spanish Mediterranean environment, scrub vegetation occupies a greater area than does forest. The impact of wildfire on the scrub vegetation and recovery afterward affects a number of other processes, including water erosion. While recovered vegetation considerably influences soil protection and erosion control, this function has scarcely been studied. This study discusses the behavior and architecture of recovering (or regenerating) typical Mediterranean shrub vegetation and the subsequent impact on soil protection. The study compared two protective forage species (Medicago arborea L. and Psoralea bituminosa L.). The research was performed in field conditions on a set of four experimental plots. A control plot was maintained with no vegetation cover. Runoff and soil loss by water erosion between 1989 and 1992 were studied on each of these plots. The natural vegetation was found to have a more significant protective effect (69.2% decrease in soil loss) than the other species tested. Soil loss on the Medicago plot decreased by 41.7%, and soil loss on the Psoralea plot decreased by 29.3%. That the Psoralea was only recently planted must be considered in evaluating its protective effects.     

Prevention through design: The effect of European Directives on construction workplace accidents

Workplace accidents still occur with distressing frequency, particularly in construction. Industrialized countries have become increasingly aware of this situation and have adopted policies to attempt to deal with this issue. Such policies have led to the development of new laws and regulations with a view to improving workplace conditions.This paper first analyzes policies regarding accident prevention in the European Union, as initially stipulated in the European Framework Directive 89/391/EEC, and more specifically in Directive 92/57/EEC, on the implementation of minimum safety and health requirements at temporary or mobile construction sites, concentrating on prevention through design. Whilst designers previously had some responsibilities for reducing risk under common law provisions in many countries, this directive was the first explicit legislation to enforce particular duties upon them. The adaptation of the provisions in this directive to the national legislation of EU member countries is also studied.The second section of the paper analyzes the incidence rate of workplace accidents in the construction sector in each country from the year when these regulations came into force until the present time. Based on the evolution of these accident rates, the paper postulates the extent to which European policies have contributed to accident prevention in construction. It is now more than a decade since this legislation has been in force which provides a suitable period for a reflective analysis on it is impact.     

Influence of thermally activated paper sludge on the behaviour of blended cements subjected to saline and non-saline environments

Background, aim and scope  One of the problems to affect Portland cement matrices is low resistance to aggressive agents, due principally to the presence of a high content of portlandite in the hydrated cements. Pozzolanic materials have played an important role in the improving the durability of cement-based materials for decades. This work studies the behaviour of cement mortar matrices blended with 10% calcined paper sludge (source for metakaolinite) and exposed to different environmental conditions (saline and non-saline environments) after 6 and 12 months of exposure. Materials and methods  Two cements were studied: an ordinary Portland cement (CEM 1, 42.5R), acting as reference cement, and a blended cement formulated by mixing 90% (by mass) of CEM 1, 42.5R with 10% (by mass) of paper sludge calcined at 700°C for 2 h. The specimens were exposed 1 year to saline and non-saline environments. All the mineralogy samples were studied through X-ray diffraction and scanning electron microscopy (SEM) equipped with an energy dispersive X-ray analyser. The in-depth study on ionic mobility was performed on samples subjected to natural exposure (coast and tableland) for 6 and 12 months. Results  Portland cement was composed of quartz, calcite, calcium hydroxide and tobermorite gels. The pozzolanic cement (10% calcined paper sludge) is of the same composition but a high calcite concentration and barium carbonate. SEM analysis from coastline show deposits of variable composition. The deposits are identified on the surface of different mineral components. The minerals from tableland are much fractured, i.e. calcite and feldspars. Inside the fractures, the deposits and the ions are located and trapped superficially. Discussion  SEM analysis of control cement Portland and 10% calcined paper sludge shows deposits on quartz and calcite with a very high concentration of Pb, Zn, Cl and barium sulphate. A very porous aspect is due to the presence of the different aggregate types. This porous configuration permits retention of the ion environment. The pozzolanic cement in environments subject to the saline mist favours the retention and transport of ions observed. Something similar also happens with the increase in exposure to outdoor weather. Non-saline samples show temperature changes (ice or thaw cycles). Barium retention is kept on the surface in fracture lines by the gelification processes. In general, it may be inferred that an increase in exposure time increases the diffusion of ions towards test piece interiors. The chemical composition profiles show that the ions present different penetration speeds. Conclusions  The results indicate the better vulnerability of pozzolanic cements from calcined paper sludge in saline and non-saline environments. The cements with a 10% addition of calcined paper sludge favour retention and transport of ion has been observed. Recommendations and perspectives  Today, projects are centred on a new recycling line for industrial waste of this kind, with special attention on its incorporation in cement manufacture as a pozzolanic material, setting the most appropriate activation conditions of the mineralogical compound in this waste (kaolinite and metakaolinite) and taking them as a starting point for this project. The use of pozzolanic cement with 10% addition of calcined paper sludge is a system which favours ionic retention.