Ozone oxidation and aerobic biodegradation with spent mushroom compost for detoxification and benzo(a)pyrene removal from contaminated soil

The combination of ozonation and spent mushroom compost (SMC)-mediated aerobic biological treatment was investigated in the removal of benzo(a)pyrene from contaminated soil. The performances of the process alone and combined were evaluated in terms of benzo(a)pyrene removal efficiency, mineralization efficiency (as total organic carbon removal), and soil residual toxicity (phytotoxicity to Lepidium Sativum and toxicity to Vibrio fischeri). In spite of the removal efficiency (35%) obtained by SMC-mediated biological process as a stand-alone treatment, the combined process showed a benzo(a)pyrene concentration reduction higher than 75%; the best removal (82%) was observed after 10 min pre-ozonation treatment. In particular, ozonation improved the biodegradability of the contaminant, as confirmed by the increase of CO(2) production (close to 70% compared to the control), mineralization (greater than 60%) and bacterial density (which increased by two orders of magnitude). Moreover, according to phytotoxicity tests on L. Sativum, the aerobic biological process of pre-ozonated soil decreased toxicity. According to the results achieved in the present study, ozonation pre-treatment showed an high potential to overcome the limitation of bioremediation of recalcitrant compound, but it should be carefully operated in order to maximize PAH removal efficiency as well as to minimize soil residual toxicity which can result from the formation of the oxidation intermediates.     

Challenges of soil mixing using catalyzed hydrogen peroxide with rotating dual axis blending technology

Although known to be one of the most effective oxidants for treatment of organic contaminants, catalyzed hydrogen peroxide (CHP) is typically not used for soil mixing applications because of health and safety concerns related to vapor generation and very rapid rates of reaction in open excavations. In likely the first large‐scale in situ CHP soil mixing application, an enhanced CHP, modified Fenton's reagent (MFR), was applied during soil mixing at the Kearsarge Metallurgical Superfund Site in New Hampshire. An innovative rotating dual‐axis blender (DAB) technology was used to safely mix the MFR into low‐plasticity silt and clay soils to remediate residual 1,1,1‐trichloroethane (111TCA); 1,1‐dichloroethene (11DCE); and 1,4‐dioxane (14D). It was expected that the aggressive treatment approach using relatively “greener” hydrogen peroxide (HP) chemistry would effectively treat Site contaminants without significant byproduct impacts to groundwater or the adjacent pond. The remediation program was designed to treat approximately 3,000 cubic yards of residual source area soil in situ by aggressively mixing MFR into the soils. The subsurface interval treated was from 7 to 15 feet below ground surface. To accurately track the soil mixing process and MFR addition, the Site was divided into 109 10‐foot square treatment cells that were precisely located, dosed, and mixed using the DAB equipped with an on‐board GPS system. The use of stabilizing agents along with careful calculation of the peroxide dose helped to ensure vapor‐free conditions in the vicinity of the soil mixing operation. Real‐time sampling and monitoring were critical in identifying any posttreatment exceedences of the cleanup goals. This allowed retreatment and supplemental testing to occur without impacting the soil mixing/in situ chemical oxidation (ISCO) schedule. Posttreatment 24‐hr soil samples were collected from 56 random locations after ensuring that the HP had been completely consumed. The posttreatment test results showed that 111TCA and 11DCE concentrations were reduced to nondetect (ND) or below the cleanup goals of 150 μg/kg for 111TCA and 60 μg/kg for 11DCE. Supplemental posttreatment soil samples, collected six months after treatment, showed 100 percent compliance with the soil treatment goals. Groundwater samples collected one year after the MFR soil mixing treatment program showed either ND or low concentrations for 111TCA, 11DCE, and 14D. Successful stabilization and site restoration was performed after overcoming considerable challenges associated with loss of soil structure, high liquid content, and reduced bearing capacity of the blended soils.     

Characterization, Fluxes and Toxicity of Leather Tanning Bath Chemicals in a Large Tanning District Area (IT)

The leather tanning industry is perceived as responsible of a significant consume of natural resources and output of wastes such as high concentration of organics, salts and heavy metals such as chromium, both in solid and liquid form as a result. Now as ever the future of tanneries strongly depends on the increase of their awareness that a sustainable industry for the future means embracing a forward-looking philosophy of the leather making process through optimal resource management within the tannery. This study reports the characterization of some chemicals used in a large tanning district area in terms of COD, BOD, aromaticity (UV₂₈₀) and double bond (UV₂₅₄) absorbance measurements, toxicity on fresh and saline water as well as terrestrial species, GC-MS scanning. The study provides a consistent set of information on tannin-associated concentration-related trends and suggests novel criteria in defining control quality for evaluating environmental impact of leather tanning industry.     

Have the results of the TOTAL-trials changed the attitude and practice of maternal-fetal medicine specialists?

Objective

To explore the views and practices of maternal-fetal medicine specialists on offering fetoscopic endoluminal tracheal occlusion (FETO) for left- and right-sided congenital diaphragmatic hernia (LCDH, RCDH) in the post Tracheal Occlusion To Accelerate Lung growth (TOTAL)-trial era.

Method

Cross-sectional knowledge, attitude and practice survey was conducted among 105 attendees of the 19th World Congress of Fetal Medicine.

Results

On average, respondents were knowledgeable about CDH, involved in research, and provided antenatal treatment options. Four out of five (82%) agreed that neonatal survival in LCDH can be reliably predicted in the prenatal period. Few respondents considered the exact risks and benefits of FETO for severe LCDH as being unclear (16%), yet half were uncertain about this for moderate LCDH (57%) and severe RCDH (45%). Most respondents offer FETO for severe LCDH (97%) and RCDH (79%), but only 59% offer it for moderate LCDH. However, half of respondents (58%) stated that not offering FETO for moderate LCDH would be a psychological burden for parents.

Conclusion

Respondents consider the risk-benefit ratio of FETO for severe LCDH clear and consistently offer FETO, but not for moderate LDCH and severe RCDH. However, not offering the option of FETO to parents was considered a psychological burden.     

Steam gasification of waste tyre: Influence of process temperature on yield and product composition

An experimental survey of waste tyre gasification with steam as oxidizing agent has been conducted in a continuous bench scale reactor, with the aim of studying the influence of the process temperature on the yield and the composition of the products; the tests have been performed at three different temperatures, in the range of 850–1000 °C, holding all the other operational parameters (pressure, carrier gas flow, solid residence time). The experimental results show that the process seems promising in view of obtaining a good quality syngas, indicating that a higher temperature results in a higher syngas production (86 wt%) and a lower char yield, due to an enhancement of the solid–gas phase reactions with the temperature. Higher temperatures clearly result in higher hydrogen concentrations: the hydrogen content rapidly increases, attaining values higher than 65% v/v, while methane and ethylene gradually decrease over the range of the temperatures; carbon monoxide and dioxide instead, after an initial increase, show a nearly constant concentration at 1000 °C. Furthermore, in regards to the elemental composition of the synthesis gas, as the temperature increases, the carbon content continuously decreases, while the oxygen content increases; the hydrogen, being the main component of the gas fraction and having a small atomic weight, is responsible for the progressive reduction of the gas density at higher temperature.     

Bisphenol A and Bisphenol S release in milk under household conditions from baby bottles marketed in Italy

A simple and sensitive validated analytical method based on liquid chromatography coupled to tandem fluorescence (FD) and ultraviolet (UV) spectrophotometry was applied to monitor the presence of bisphenol A and bisphenol S in plastic baby bottles marketed in Italy. The limits of detection (LOD) were 3.75 ng mL^?1 and 80.00 ng mL^?1, and those of quantification (LOQ) were 12.51 ng mL^?1 and 260.00 ng mL^?1 for BPA (FD detection) and for BPS (UV detection), respectively. BPA was found in only four samples, two samples undergone to microwave heating and two samples undergone to bottle warmer heating either at 40°C or at 80°C. Although the quantities of leached BPA were well below the reference dose for daily intake established by the European Food Safety Authority (EFSA) (4.0 µg kg^?1 bw/day), the release of BPA and BPS from these plastic materials should be carefully considered by the government authorities to increase people's awareness on this issue and to protect the most vulnerable population group.