Modelling Temperature Trends in New Zealand

If global warming is accelerating, then one might expect temperatures for most stations to be accelerating and perhaps variability to be increasing. In this study, we examine 57 New Zealand temperature time series for evidence of non-linearity and changing variability. These correspond to time series for annual minima, annual means and annual maxima for 19 stations. Estimation is by an extended least-squares method. We find a surprising diversity of behaviour of these series – presumably reflecting their different geographic factors as well as series length. We give evidence of regions where temperatures are decreasing. For series where a linear trend is significant, it is downwards in about one third of the cases. This proportion was higher in the South Island, especially for series of minima. Where a non-linear trend is significant, temperatures are decelerating in about one half of the cases. The ratio of downward to upward trends is highest among annual maxima and South Island minima and smallest in annual means. Where a linear trend in the variability is significant, it is decreasing in 13 cases and increasing in 5 cases, although possibly this is partly due to poorer quality data last century. Where a non-linear trend in the variability is significant, variability is decelerating in about two thirds of the cases. The results are used to project upper and lower return levels of minima, means and maxima for each of the series to the year 2010.     

Environmental quality assessment studies of coal handling on peripheral land near Kanika siding, Basundhra-Garjanbahal area of MCL, Sundergarh, Orissa, India

Coal has been recognized as the most important source of energy generation in India. The present work was undertaken in order to assess the environmental impact of coal handling on peripheral land under near Kanika siding, Orissa, India. The data on suspended particulates in ambient air indicates an additional load of 50.5–108.7 μg/m³) to the ambient air due to coal loading which is equivalent to 50 × 365 to 108 × 365 kg/year. However, in the southern side (opposite to siding) covering the crop fields, the dust accumulation was maximum, i.e., 0.021 to 0.035 mg/cm² area in comparison to 0.001 to 0.021 in the eastern side and 0.001 to 0.029 in western side of the crop fields. The physical and chemical properties of soil was also assessed. The results reveal that the coal loading has definite negative impact on the peripheral land near the site.     

Spatial distribution of trace metals (Cd, Pb, Hg, Cu, Zn, Fe and Mn) and oligo-elements (Mg, Ca, Na and K) in surface sediments of the Gulf of Tunis (Northern Tunisia)

The purpose of this paper is to evaluate the levels and spatial distribution of trace metals (Cd, Pb, Cu, Hg, Zn, Fe, and Mn), oligo-elements (Mg, Ca, Na and K), total organic carbon (TOC), and total nitrogen (TN) in the fine fraction of surface sediments collected from 38 stations in Gulf of Tunis (Mediterranean Sea, Northern Tunisia) between 2004 and 2005. The results showed that metals, oligo-elements, TOC, and TN concentrations in the sediments of the Gulf of Tunis are generally low compared to those found in other similar coastal marine areas. The spatial distribution of metals showed areas of major accumulation of Pb, Cd, Cu, Fe, and Zn in the central area of the Gulf and near the Mejerda River. The marine currents are influencing factors on metal accumulation in sediments. The principal component analysis applied to our elemental analytical results showed that there is a positive correlation between Fe, Zn, Cu, and Pb. These metals have a stronger affinity with site connection in the sediments than Ca and Mn.     

Using diatoms as quality indicators for a newly-formed urban lake and its catchment

Periphytic diatoms were studied to evaluate the water quality of a newly created lake, formed by the enclosure of the formerly tidal Cardiff Bay (Wales, UK), and the effects of two inflowing rivers which drain densely populated and industrialised catchments. Seven sites in Cardiff Bay and two locations on the inflowing rivers were monitored for diatoms and water chemistry over 2 years. Water quality was assessed using a revised UK trophic diatom index (TDI) and new methods to determine ecological quality ratios and ecological status classes as required by the EU Water Framework Directive. Diatom assemblages reflected spatiotemporal variations in environmental conditions between the rivers and Cardiff Bay and within the bay. In the bay, diatoms reflected differences in river quality and possibly local pollution in certain areas of the lake. High values of the TDI indicated eutrophic to hypertrophic conditions in both rivers and in the bay and diatoms indicated poor ecological status.     

Essential (Cu) and nonessential (Cd and Pb) metals in ichthyofauna from the coasts of Sinaloa state (SE Gulf of California)

With the aim of giving an overview on concentration and distribution of Cd, Cu, and Pb in fish from the coasts of Sinaloa state (SE Gulf of California), specimens with different feeding habits were collected in five locations. Sampling occurred between June 2003 and March 2004. Metal analyses on fish tissues were made by graphite furnace (Cd, Pb) and flame (Cu) atomic absorption spectrophotometry. Metal concentrations in tissues of carnivorous fish were grouped together and compared with corresponding concentrations in non-carnivorous fish; Cu and Pb levels were significantly (p?<?0.05) higher in liver of non-carnivorous species. Though no samples exceeded the maximum level set in international legislation for fish, from the perspective of the public health and considering the legal limits of fishery products for human consumption, Cu concentrations were exceeded (in tissues different from muscle) in four carnivorous and five non-carnivorous species according to the Australian legislation. In the case of Cd, two carnivorous species (Pomadasys leuciscus and Caulolatilus princeps) and one non-carnivorous species (Mugil cephalus), showed concentrations over the maximum level of 2 μg g^???1 dry weight considered in the Mexican legislation. Considering average amounts of fish consumption in Mexico, daily mineral intake (DMI) values for Cu and percentage weekly intake (PWI) of Cd and Pb were estimated; none of the analyzed metals in edible portion of analyzed fish could be detrimental to humans.     

Accumulation of total trace metals due to rapid urbanization in microtidal zone of Pallikaranai marsh, South of Chennai, India

The article presents the results for enrichment of total trace metals (TTMs) from Pallikaranai salt marsh in South Chennai, a metropolis on the southeast coast of India. TTMs Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd, Sr, V, and Hg along with sediment texture, OC, and CaCO₃ were analyzed in 36 surface sediments collected during August 2008 to recognize and observe the input of TTMs in the marsh from various sources in the city limits. In view of the rapid urbanization and industrialization in Chennai City, especially on the southern side, uncontrolled input of sewage, garbage, and industrial effluents into the Pallikaranai marsh land, the elevated concentrations are not surprising. The level of enrichment of TTMs has also increased by 20% to 60% for most of the elements when compared with all other ecosystems in the world as well as the nearby area. The results also indicate that the marshy region is more heavily contaminated with Cd, Hg, Cr, Cu, Ni, Pb, and Zn than other regions on the southeast coast of India. The Enrichment Factor, Contamination Factor, and I _geo indexes are calculated, and these values are useful to assess the degree of pollution in sediments. The spatial distributions of TTMs are also controlled by other factors like geochemical, precipitation, and flocculation of particulate substances in the marsh. The results of the present study suggest the need for a regular monitoring and management program which will help to improve the quality of Pallikaranai pristine marsh land.     

Hydrogeochemical characterization of fluoride rich groundwater of Wailpalli watershed, Nalgonda District, Andhra Pradesh, India

The groundwater of Nalgonda district is well known for its very high fluoride content for the past five decades. Many researchers have contributed their scientific knowledge to unravel causes for fluoride enrichment of groundwater. In the present paper, an attempt has been made to relate the high fluoride content in the groundwater to hydrogeochemical characterization of the water in a fracture hard rock terrain—the Wailpally watershed. Groundwater samples collected from all the major geomorphic units in pre- and post-monsoon seasons were analyzed for its major ion constituents such as Ca^2?+?, Mg^2?+?, Na^?+?, K^?+?, CO $_{3}^{-}$ , HCO $_{3}^{-}$ , Cl^???, SO $_{4}^{-2}$ , NO $_{3}^{-}$ , and F^???. The groundwaters in the watershed have the average fluoride content of 2.79 mg/l in pre-monsoon and 2.83 mg/l in post-monsoon. Fluoride concentration in groundwater does not show perceptible change neither with time nor in space. The ionic dominance pattern is in the order of Na^?+? > Ca^2?+??> Mg^2?+??> K^??? among cations and HCO $_{3}^{-}\:\,>$ Cl^????> SO $_{4}^{-2} >$ NO $_{3}^{-} >$ F^??? among anions in pre-monsoon. In post-monsoon, Mg replaces Ca^2?+? and NO $_{3}^{-}$ takes the place of SO $_{4}^{-2}$ . The Modified Piper diagram reflect that the water belong to Ca^?+?2–Mg^?+?2–HCO $_{3}^{-}$ to Na^?+?–HCO $_{3}^{-}$ facies. Negative chloralkali indices in both the seasons prove that ion exchange between Na^?+? and K^?+? in aquatic solution took place with Ca^?+?2 and Mg^?+?2 of host rock. The interpretation of plots for different major ions and molar ratios suggest that weathering of silicate rocks and water–rock interaction is responsible for major ion chemistry of groundwater in Wailpally watershed. Chemical characteristics and evolution of this fluoride-contaminated groundwater is akin to normal waters of other hard rock terrain; hence, it can be concluded that aquifer material play an important role in the contribution of fluoride in to the accompanying water. High fluoride content in groundwater can be attributed to the continuous water–rock interaction during the process of percolation with fluorite-bearing country rocks under arid, low precipitation, and high evapotranspiration conditions.     

Emissions of SO2, NO x and particulates from a pipe manufacturing plant and prediction of impact on air quality

Integrated pipe manufacturing industry is operation intensive and has significant air pollution potential especially when it is equipped with a captive power production facility. Emissions of SO₂, NO _x , and particulate matter (PM) were estimated from the stationary sources in a state-of-the-art pipe manufacturing plant in India. Major air polluting units like blast furnace, ductile iron spun pipe facility, and captive power production facility were selected for stack gas monitoring. Subsequently, ambient air quality modeling was undertaken to predict ground-level concentrations of the selected air pollutants using Industrial Source Complex (ISC 3) model. Emissions of SO₂, NO _x , and particulate matter from the stationary sources in selected facilities ranged from 0.02 to 16.5, 0.03 to 93.3, and 0.09 to 48.3 kg h^???1, respectively. Concentration of SO₂ and NO _x in stack gas of 1,180-kVA (1 KW = 1.25 kVA) diesel generator exceeded the upper safe limits prescribed by the State Pollution Control Board, while concentrations of the same from all other units were within the prescribed limits. Particulate emission was highest from the barrel grinding operation, where grinding of the manufactured pipes is undertaken for giving the final shape. Particulate emission was also high from dedusting operation where coal dust is handled. Air quality modeling indicated that maximum possible ground-level concentration of PM, SO₂, and NO _x were to the tune of 13, 3, and 18 μg/m³, respectively, which are within the prescribed limits for ambient air given by the Central Pollution Control Board.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Closed cycle construction: an integrated process for the separation and reuse of C&D waste

In The Netherlands, construction and demolition (C&D) waste is already to a large extent being reused, especially the stony fraction, which is crushed and reused as a road base material. In order to increase the percentage of reuse of the total C&D waste flow to even higher levels, a new concept has been developed. In this concept, called 'Closed Cycle Construction', the processed materials are being reused at a higher quality level and the quantity of waste that has to be disposed of is minimised. For concrete and masonry, the new concept implies that the material cycle will be completely closed, and the original constituents (clay bricks, gravel, sand, cement stone) are recovered in thermal processes. The mixed C&D waste streams are separated and decontaminated. For this purpose several dry separation techniques are being developed. The quality of the stony fraction is improved so much, that this fraction can be reused as an aggregate in concrete. The new concept has several benefits from a sustainability point of view, namely less energy consumption, less carbon dioxide emission, less waste production and less land use (for excavation and disposal sites). One of the most remarkable benefits of the new concept is that the thermal process steps are fuelled with the combustible fraction of the C&D waste itself. Economically the new process is more or less comparable with the current way of processing C&D waste. On the basis of the positive results of a feasibility study, currently a pilot and demonstration project is being carried out. The aim is to optimise the different process steps of the Closed Cycle Construction process on a laboratory scale, and then to verify them on a large scale. The results of the project are promising, so far.