不同能量电子辐照下星用瑞侃导线性能退化研究

目的研究卫星上外露导线在空间辐射环境下的耐受能力。方法通过分析GEO轨道下在轨10年航天器外露瑞侃导线的辐照环境,研究低能和高能电子对导线性能的影响,地面模拟试验参数选择能量分别为45 keV和1 MeV,注量率均为8.3×10^10 e/(cm^2·s),总注量均为2×10^16 e/cm^2。考察瑞侃导线力学性能(断裂伸长率、拉伸强度)和电性能(击穿电压)的退化情况,并用XPS和SEM测试分析手段,对其电子辐照损伤机理进行研究。结果在不同能量电子辐照下,瑞侃导线的力学性能均略有下降,没有显著区别,而电学性能严重退化,且低能电子较高能电子对其电学性能影响更为严重,其击穿电压分别下降了100%和50%。结论通过剂量-深度分布计算,45 keV入射电子能量全部沉积在样品表层下数微米的深度范围内,完全被导线外皮吸收,对样品的损伤较大;而1 MeV入射电子能量绝大部分穿透表皮沉积在样品铜芯中,因而其性能退化情况相对低能电子较小。进一步的,通过SEM和XPS测试和分析发现,电子辐照造成瑞侃导线分子链降解,形成自由基以及气体,自由基的再交联是造成瑞侃导线损伤的重要机理。     

Interactive mechanism of working environments and construction behaviors with cognitive work analysis: an elevator installation case study

Unsafe behavior is a leading factor in accidents, and the working environment significantly affects behaviors. However, few studies have focused on detailed mechanisms for addressing unsafe behaviors resulting from environmental constraints. This study aims to delineate these mechanisms using cognitive work analysis (CWA) for an elevator installation case study. Elevator installation was selected for study because it involves operations at heights: falls from heights remain a major cause of construction worker mortality. This study adopts a mixed research approach based on three research methodology stages. This research deconstructs the details of the working environment, the workers’ decision-making processes, the strategies chosen given environmental conditions and the conceptual model for workers’ behaviors, which jointly depict environment–behavior mechanisms at length. By applying CWA to the construction industry, environmental constraints can easily be identified, and targeted engineering suggestions can be generated.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds(BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol(SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity.In places with high plant cover in the tropics and in China where air pollution is serious,the effect of BVOCs on ozone and secondary organic aerosols is strong.The present research aims to provide a comprehensive review ...     

基于遥感尾气监测的柴油车气态污染物排放因子计算方法研究

采用遥感尾气测试系统实测了柴油车在实际道路工况下的CO、HC和NO排放特征,修正了排放因子的计算方法,并与车载排放测试系统（PEMS）实测结果进行了验证,获得了实测车辆的CO、HC和NO排放因子.测试结果显示,在各种遥感监测的工况下柴油车尾气中均含有较高浓度的氧气,未考虑氧气影响的燃烧方程反演获得的各污染物体积浓度计算值与PEMS实测值的偏差较大,且氧气浓度越大,偏差越大.经过氧气修正的燃烧方程反演计算的尾气浓度与PEMS实测值吻合度大幅提升,适用于实际工况下遥感检测车辆尾气的反演计算.修正算法得到CO、HC和NO的排放因子离散性较小,精确度较高,可以为量化柴油车尾气排放贡献提供科学依据.     

长江经济带二氧化碳净排放时空演变特征及脱钩效应

研究区域CO₂净排放,对“碳中和”战略的实现具有重要意义.以长江经济带为例,在揭示1999～2018年长江经济带CO₂净排放时空演变特征的基础上,分析长江经济带不同区域社会发展与CO₂净排放的脱钩效应,以期为差异化区域产业发展和碳减排路径提供支持.结果表明：(1)1999～2012年长江经济带CO₂排放量上升了2 244.23×10⁶ t,碳汇量在研究时间段增长了148.07×10⁶ t;(2)长江经济带呈现“变绿”趋势,2013～2018年中高碳汇量区域(NPP>800 g·m^-2,以C计)面积较1999～2012年上升了23.25%;(3)长江经济带下游经济社会发展与CO₂净排放脱钩效应较强,上、中和下游强脱钩城市占长江经济带强脱钩城市的比例分别为12%、34%和54%.     

光度法测定水中己二胺

本文报道了在碱性介质中,沸水浴条件下,己二胺与２,４二硝基氯苯反应生成黄色的１,６二（２,４二硝基苯胺）己烷化合物,用氯仿萃取后于波长４２０ｎｍ处,用２０ｍｍ比色皿比色测定。文中对碱的用量,反应温度及时间,显色剂用量及萃取效率等进行了较详细研究,确定了最佳实验条件并进行了废水样品分析,结果满意。     

Prediction of polychlorinated dibenzofuran congener distribution from gas-phase phenol condensation pathways

A model for predicting the distribution of dibenzofuran and polychlorinated dibenzofuran (PCDF) congeners from a distribution of phenols was developed. The model is based on a simplified chemical mechanism. Relative rate constants and reaction order with respect to phenol precursors were derived from experimental results using single phenols and equal molar mixtures of up to four phenols. For validation, experiments were performed at three temperatures using a distribution of phenol and 19 chlorinated phenols as measured in municipal waste incinerator exhaust gas. Comparison of experimental measurements and model predictions for PCDF isomer distributions and homologue pattern shows agreement within measurement uncertainty. The R-squared correlation coefficient exceeds 0.9 for all PCDF isomer distributions and the distribution of PCDF homologues. These results demonstrate that the distribution of dibenzofuran and the 135 PCDF congeners from gas-phase condensation of phenol and chlorinated phenols can be predicted from measurement of the distribution of phenol and the 19 chlorinated phenol congeners.     

Chemical composition of post-harvest biomass burning aerosols in Gwangju, Korea

The main objective of this study was to investigate the chemical characteristics of post-harvest biomass burning aerosols from field burning of barley straw in late spring and rice straw in late fall in rural areas of Korea. A 12-hr integrated intensive sampling of particulate matter (PM) with an aerodynamic diameter less than or equal to 10 microm (PM10) and PM with an aerodynamic diameter less than or equal to 2.5 microm (PM2.5) biomass burning aerosols had been conducted continuously in Gwangju, Korea, during two biomass burning periods: June 4--15, 2001, and October 8--November 14, 2002. The fine and coarse particles of biomass burning aerosols were analyzed for mass and ionic, elemental, and carbonaceous species. The average fine and coarse mass concentrations of biomass burning aerosols were, respectively, 129.6 and 24.2 microg/m3 in June 2001 and 47.1 and 33.2 microg/m3 in October--November 2002. An exceptionally high PM2.5 concentration of 157.8 microg/m3 was observed during biomass burning events under stagnant atmospheric conditions. In the fine mode, chlorine and potassium were unusually rich because of the high content of semi-arid vegetation. Both organic carbon (OC) and elemental carbon increased during the biomass burning periods, with the former exhibiting a higher abundance. PM from the open field burning of agricultural waste has an adverse impact on local air quality and regional climate.     

Chlorination of dibenzofuran and dibenzo-p-dioxin vapor by copper (II) chloride

Dibenzofuran (DF) is formed from phenol and benzene in combustion gas exhaust streams prior to particle collection equipment. Subsequent chlorination at lower temperatures on particle surfaces is a potential source of chlorinated dibenzofuran (CDF). Gas streams containing 8% O₂ and approximately 0.1% DF vapor were passed through particle beds containing copper (II) chloride (0.5% Cu, mass) at temperatures ranging from 200 to 400 °C to investigate the potential for CDF formation during particle collection. Experiment duration was sufficient to provide an excess amount of DF (DF/Cu=3). The efficiency of DF chlorination by CuCl₂ and the distribution of CDF products were measured, with effects of temperature, gas velocity, and experiment duration assessed. Results of a more limited investigation of dibenzo-p-dioxin (DD) chlorination by CuCl₂ to form chlorinated DD (CDD) products are also presented.

The efficiency of DF/DD chlorination by CuCl₂ was high, both in terms of CuCl₂ utilization and DF/DD conversion. Total yields of Cl on CDF/CDD products of up to 0.5 mole Cl per mole CuCl₂ were observed between 200 and 300 °C; this suggests that nearly 100% CuCl₂ was utilized, assuming a conversion of two moles of CuCl₂ to CuCl per mole Cl added to DD/DF. In a short duration experiment (DF/Cu=0.3), nearly 100% DF adsorption and conversion to CDF was achieved. The degree of CDF chlorination was strongly dependent on gas velocity. At high gas velocity, corresponding to a gas–particle contact time of 0.3 s, mono-CDF (MCDF) yield was largest, with yields decreasing with increasing CDF chlorination. At low gas velocity, corresponding to a gas–particle contact time of 5 s, octa-CDF yield was largest. DF/DD chlorination was strongly favored at lateral sites, with the predominant CDF/CDD isomers within each homologue group those containing Cl substituents at only the 2,3,7,8 positions. At the higher temperatures and lower gas velocities studied, however, broader isomer distributions, particularly of the less CDD/CDF products, were observed, likely due to preferential destruction of the 2,3,7,8 congeners.