Longitudinal examination of underage drinking and subsequent drinking and risky driving

INTRODUCTION: Alcohol use, alcohol misuse, and risky driving from adolescence into young adulthood were compared by drinking onset age. METHODS: Surveys were administered in Grades 5/6, 6/7, 7/8, 10, 12, and at approximately age 23. Participants were placed into Drinking Onset groups based on self-reported alcohol use frequency on the adolescent surveys. Driving records were examined in three age periods: under 21, 21-25, and 26+. RESULTS: The earliest drinking initiators reported higher alcohol use and misuse on each survey, and were more likely to have risky driving offenses before age 21 and to have alcohol driving offenses in all three age periods. DISCUSSION: The earliest drinking initiators engaged in risky drinking behavior and risky driving behavior that was consistently higher than those with later drinking initiation, beginning in adolescence and persisting well into young adulthood.     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

Asian Americans and workplace discrimination: The interplay between sex of evaluators and the perception of social skills

In two role‐playing scenarios, we investigate how White male and female evaluators perceive an Asian American versus White job candidate on the dimensions of competence and social skills and how these perceptions affect evaluators' decisions in hiring and promotion. Specifically, Study 1 examines how the perceptions of competence and social skills affect Asian (versus White) college graduates' chance of obtaining a non‐technical (versus technical) position, and Study 2 tests how these perceptions affect Asians' probability of promotion relative to Whites'. Our findings suggest that female evaluators were less likely to select Asian than White candidates into positions involving social skills and were less likely to promote Asian than White candidates into these types of positions. Furthermore, female evaluators' perception that Asians were less socially skilled than Whites mediated both of these decisions. This paper contributes to the understanding of workplace discrimination of Asian Americans. Copyright © 2012 John Wiley & Sons, Ltd.     

Exploring the dark side of organizational citizenship behavior

In recent years, there has been increasing interest in positive organizational scholarship in general, including positive organizational behavior (POB) in particular. This work identifies organizational citizenship behavior (OCB) as a prototypical POB. Conceptualizing OCBs in this way is sensible in light of more than 30 years of research highlighting the desirable aspects of such behavior. At the same time, some researchers have raised questions about positive organizational scholarship and have called for a more balanced view of ostensibly positive behaviors. The purpose of this paper, then, is to take a more nuanced view of OCBs while highlighting the dark side of citizenship behavior. In doing so, we review conceptual and empirical work that has challenged the idea that OCBs are inherently positive. We also discuss research that seeks to develop a deeper understanding of the conditions under which OCB does more harm than good. Finally, important areas for future research and the practical realities facing scholars who seek to publish research investigating the dark side of citizenship are addressed as well. Copyright © 2012 John Wiley & Sons, Ltd.     

SAFEST TO TRAVEL BY BICYCLE,CAR, OR BIG TRUCK?

This study compares highway crash incidence, injuries, and costs by vehicle type. Annual crash and injury incidence were estimated using Crashworthiness Data System (1988-1991), National Automotive Sampling System (1982-1986), General Estimates System (1992-1993), and Fatal Analysis Reporting System (1993) data. Costs were computed based on restraint use, body region, and threat-to-life severity of the injury. Costs were then allocated between vehicle types using three different methods in order to answer comparative safety questions. Motor vehicle and bicycle crash costs total $389 billion annually; 75% resulting from passenger vehicles. Motorcycles and bicycles have the highest costs per 1000 vehicle and passenger miles; costs per victim are highest for pedestrians, bicyclists, and motorcyclists. Costs per vehicle mile for heavy trucks and passenger cars are comparable but exceed costs for light trucks. Passenger vehicle occupants are safest if a crash occurs. Light truck, other single truck, and bus occupants have the lowest cost per passenger mile, but higher costs than air and rail travelers. Motorcyclists face the greatest risks. Combination trucks may not impose an excess risk to other drivers, but their drivers face large risks.     

Biomechanics of Brain and Spinal-Cord Injury: Analysis of Neuropathologic and Neurophysiology Experiments

This study analyzes 46 brain and 48 spinal-cord impact experiments. The velocity of brain impact was 2.0-10.0 m/s and displacement, 0.75-5.0 mm (5.3-33% compression) using a controlled pneumatic impact. The velocity of spinal-cord impact was 1.5-6.0 m/s and displacement, 1.25-3.25 mm (25-65% compression). Brain injury varied from cortical contusion, diffuse axonal injury (DAI), to fatalities, and spinal-cord injury from temporary to complete loss of somatosensory-evoked potentials. Logist functions were determined for each injury severity and various biomechanical parameters, VC, C, V, and combinations. Brain and spinal-cord injury is most strongly correlated to VC, the viscous response. The goodness-of-fit was x² = 22.1, R-0.84 and p< 0.0000 for fatal brain injury, x² = 27.5, R = 0.96 and p< 0.0000 for cortical contusion, and x² = 17.7, R = 0.49 and p < 0.0001 for partial recovery of spinal-cord conduction. Neural tissue is viscoelastic, with a rate-dependent tolerance related to energy absorption. VC is a measure of energy absorption by impact deformation and is predictive of neural contusion, DAI, long-duration coma, spinal-cord dysfunction, and death. Tolerances for various severities of neural injury are presented. At the tissue level, VC is the product of strain and strain-rate, ε dε/dt. The research shows that strain is not a sufficient parameter of neural injury risk, and that the product of strain and strain-rate is a key biomechanical parameter for brain and spinal-cord injury.     

Review: The Dynamics of Near Vertex Head Impact and its Role in Injury Prevention and the Complex Clinical Presentation of Basicranial and Cervical Spine Injury

The clinical presentation of cervical and basilar skull fractures following bead impact is often complex, particularly when multiple noncontiguous fractures are present. Based on the results of 22 human cadaver head-neck impact experiments, a biomechanical framework of spinal injury is developed in which these complex cases may be better understood. This includes the significance of head rebound, head and neck decoupling, cervical spine buckling, cervical injury mechanisms, basilar skull fractures, and cervical spine tolerance. These data also demonstrate that compliant pads significantly increase the risk for spinal injury though they also significantly reduce peak head force and the head injury criteria (p < 0.04). On the basis of these observations, we hypothesize that impact injury should be modeled as the dynamic response of two large masses, coupled by a segmented curved beam-column composed of seven small masses with interposed nonlinear viscoelastic flexibility elements.     

Protection Against Dust by Respirators

This article is a brief review of the mechanism of action of fibrous filters and of the performance of respirators; it neglects many of the complications discussed in longer and more detailed articles. An expression is given for the pressure drop across a filter in terms of fibre diameter and filtration velocity. The particle capture mechanisms of interception and diffusional deposition are introduced and the way in which filtration efficiency varies with particle size is discussed. Filters with fibres of small diameter are shown to be the most efficient, but their use can cause problems. Electrically charged materials are widely used in respirators because of their high efficiency and low pressure drop. Types of material, their means of charging, and their method of action are described. An account is given of respirator leakage, the protection factor, and of the way that these may vary in a period of use. The leakage of air and particles through face seal leaks and leaky valves is discussed. The frequent discrepancy in the protection given by respirators in the workplace, on the one hand, and that suggested by laboratory measurements, on the other, is reviewed, and the article ends with an account of the combined effect of aerosol penetration through a filter and through a leak.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.