Evaluation of the biodegradability of copolyesters containing aromatic compounds by investigations of model oligomers

Model oligo esters of terephthalic acid with 1,2-ethanediol, 1,3-propanediol, and 1,4-butanediol have been investigated with regard to their biodegradability in different biological environments. Well-characterized oligomers with weight-average molar masses of from 600 to 2600 g/mol exhibit biodegradation in aqueous systems, soil, and compost at 60°C. SEC investigations showed a fast biological degradation of the oligomer fraction consisting of 1 or 2 repeating units, independent of the diol component used for polycondensation, while polyester oligomers with degrees of polymerization higher than 2 were stable against microbial attack at room temperature in a time frame of 2 months. At 60°C in a compost environment chemical hydrolysis also degrades chains longer than two repeating units, resulting in enhanced degradability of the oligomers. Metabolization of the monomers and the dimers as well by the microorganisms could be confirmed by comparing SEC measurements and carbon balances in a Sturm test experiment. Based on these results degradation characteristics of potential oligomer intermediates resulting from a primary chain scission from copolyesters consisting of aromatic and aliphatic dicarbonic acids can be predicted depending on their composition. These results will have an evident influence on the evaluation of the biodegradability of commercially interesting copolyesters and lead to new ways of tailor-made designing of new biodegradable materials as well.     

Biodegradation of aliphatic and aromatic hydrocarbons by natural soil microflora and pure cultures of imperfect and lignolitic fungi

The biodegradation of aliphatic and aromatic hydrocarbons by natural soil microflora and seven fungi species, including imperfect strains and higher level lignolitic species, is compared in a 90-day laboratory experiment using a natural, not-fertilized soil contaminated with 10% crude oil. The natural microbial soil assemblage isolated from an urban forest area was unable to significantly degrade crude oil, whereas pure fungi cultures effectively reduced the residues by 26-35% in 90 days. Normal alkanes were almost completely degraded in the first 15 days, whereas aromatic compounds (phenanthrene and methylphenanthrenes) exhibited slower kinetics. Aspergillus terreus and Fusarium solani, isolated from oil-polluted areas, produced the more efficient attack of aliphatic and aromatic hydrocarbons, respectively. Overall, imperfect fungi isolated from polluted soils showed a somewhat higher efficiency, but the performance of unadapted, indigenous, lignolitic fungi was comparable, and all three species, Pleurotus ostreatus, Trametes villosus and Coriolopsis rigida, effectively degraded aliphatic and aromatic components. The simultaneous, multivariate analysis of 22 parameters allowed the elucidation of a clear reactivity trend of the oil components during biodegradation: lower molecular weight n-alkanes > phenanthrene > 3-2-methylphenanthrenes > intermediate chain length n-alkanes > longer chain length n-alkanes > isoprenoids approximately 9-1-methylphenanthrenes. Irrespective of the individual degrading capacities, all fungi species tested seem to follow this decomposition sequence.     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

The effect of papermill wastewater and organic amendments of sodium accumulation by potted cottonwoods

In this experiment, the impacts of pulp mill effluent irrigation, Fraser cottonwood (Populus deltoides 'Fraser') seedlings, and pulp sludge and manure soil amendments on sodium accumulation and distribution in the soil profile were evaluated during a 6 month greenhouse study. Sludge soil amendments and wastewater irrigation did not reduce stem biomass production of the cottonwood. Increased stem biomass production associated with manure soil amendments resulted in greater total uptake of sodium into stem material. This uptake was 0.002% of wastewater sodium inputs. In containers with seedlings, sodium concentrations were less in the surface horizon and more in the lower horizons than in containers with no seedlings. Infiltration rates and total sodium accumulation in the soil profile were not affected by the presence of Fraser cottonwood or the application of sludge or manure amendments to soil.     

Vertical gradients of ozone and carbon dioxide within a deciduous forest in Central Pennsylvania

Ambient concentrations of ozone (O(3)) and carbon dioxide (CO(2)) were measured at locations from the forest floor to the top of the canopy in a deciduous forest at the Moshannon State Forest in northcentral Pennsylvania. O(3) concentrations were measured from May-September for three years (1993-1995) while CO(2) concentrations were measured only during July and August of 1994. O(3) concentrations increased steadily during the day at all locations, peaking during the middle to late afternoon hours. O(3) concentrations then steadily declined to their lowest point, just before dawn. Vertical O(3) concentration gradients varied seasonally and among years. However, O(3) concentrations were highest within the forest canopy and lowest at the forest floor, with an average difference of approximately 13%. Differences in O(3) concentrations between the canopy and forest floor were greatest at night. O(3) concentrations were slightly higher at locations within the canopy than above the canopy. CO(2) concentrations were consistenly higher near the forest floor and were higher above the canopy than within the canopy. CO(2) concentrations were higher at night than during the day at all locations, especially near the forest floor.     

Organic carbon concentration profiles in recent cave sediments: records of agricultural pollution or diagenesis?

Recent (<7 years old) cave sediments in Speedwell Cavern, Derbyshire, show an approximately exponential decay of organic carbon with depth. This phenomenon was thought to be due to one of two causes: (i) changing agricultural practice within the catchment feeding the cave, especially the increased use of sewage sludge and animal slurry as fertilizer; (ii) a relatively constant organic carbon concentration over time in the input sediment, with subsequent carbon mineralization during diagenesis. Carbon isotope composition of the organic material and the evolution of H/C ratio with depth indicate that the latter hypothesis is correct and that the profiles result from microbial diagenesis, not increased organic carbon inputs. By comparison with sediment of known (7 years) age, temporal decay constants for organic matter can be derived; these lie between rates previously determined for organic matter decomposition in marine sediments and soils. The H/C ratio of organic matter can be modelled as a function of time and proceeds in a similar fashion to soil organic material.     

The monitoring of cadmium,zinc and copper in the kidneys and liver of humans deceased in the region of Cracow (Poland)

Cadmium, zinc and copper levels were determined in the renal cortex and liver of 60 inhabitants of Cracow, Poland. Cadmium levels in the renal cortex were contained in broad limits of 5–176 g/g, mean 50.6 g/g (wet weight). Maximum levels were found in the age group of about 50–60 years. The levels were slightly higher in men (53 g/g) than in women (45 g/g), with no effect of location within the region. The levels in smokers (62 g/g) were much higher than in non-smokers (32 g/g). The above relations were less pronounced for cadmium levels in the liver. Whole body retention of cadmium followed the pattern of cadmium in renal cortex. The level of zinc in renal cortex reflected those of cadmium. A significant proportion of the population (54% in smokers, 9% in non-smokers) showed cadmium levels in renal cortex exceeding the reference level of 50 g/g recently accepted for general population. In the view of the authors the exposure to cadmium of the population of Cracow is excessive and calls for attention.The study was performed under a KBN grant No 40106 91 01.     

Mass transfer resistance in ASFF reactors for waste water treatment

Analysis of mass transfer resistances was performed for an aerated submerged fixed-film reactor (ASFF) for the treatment of waste water containing a mixture of sucrose and ammonia. Both external and internal mass transfer resistances were considered in the analysis, and characterized as a function of feed flow-rate and concentration. Results show that, over a certain operating regime, external mass transfer resistance in the system was greater for sucrose removal than ammonia. This is because the reaction rates for carbon removal were much larger than those of nitrogen. As a result, existence of any form of mass transfer resistance caused by inadequate mixing or diffusion limitations, strongly affects the overall removal rates of carbon more than nitrogen. Effects of the internal m?ss transfer resistance were virtually non-existent for ammonia removal. This behaviour was found over two orders of magnitude range for the effective diffusivity for ammonia, and one order of magnitude for the film specific surface area. However, over the same parameters' range, it is found that sucrose removal was strongly affected upon lowering its effective diffusivity and increasing the film specific surface area.     

Cationic surfactant as a sensitizer for the spectrophotometric determination of hydrogen sulphide in air and evaluation of a new absorbing medium containing triethanolamine-zinc acetate-sodium hydroxide

An extractive spectrophotometric method for the determination of trace amounts of hydrogen sulphide after fixing the gas in triethanolamine (TEA)-zinc acetate-sodium hydroxide solution is described. The method is based on the reaction of iodate with hydrogen sulphide in the presence of acid and excess chloride ion leading to the formation of ICl2- species which is used to iodinate 2',7'-dichlorofluorescein to form 2',7'-dichloro-4',5'-diiodofluorescein. The iodinated product formed is extracted into an organic solvent and sensitized by equilibrating with a cationic surfactant, cetrimide, in the presence of acetate buffer (pH 5.9 +/- 0.1). The colour system obeys Beer's law over the range 0-1 microg of hydrogen sulphide and the relative standard deviation is 2.4% for 10 determinations at 0.75 microg of hydrogen sulphide. The effect of interfering gases on the determination is discussed. The proposed absorbing solution has been evaluated using a hydrogen sulphide permeation device. This absorbing solution has an absorption efficiency of > 93% at a flow rate of 1.5 litre min(-1) for a sampling period of 2 h. The fixed H2S is stable for 40 days. The method has been applied to determine residual H2S levels in a laboratory fume hood and in the vicinity of sewage pumping station. The method can be used to determine as little as 0.05 microg of hydrogen sulphide.     

A model describing the complexing effect in the leaching of aluminum from cooking utensils

A simple model describing the complexing effect in the leaching of aluminum from cooking utensils is presented in this paper. Some experimental results obtained by previous workers may be explained by this model, which demonstrates that the complexing effect takes a very important role in the process of aluminum liberated from cooking utensils. Increased concentrations of complexing ions (organic acids, fluoride ion, OH-, etc.) significantly enhance the release of aluminum. The speciation of aluminum in simulated food solution is also investigated. The model suggests that in the pH range of most food (pH 4-8) aluminum present is predominantly in the form of organic Al-complexes, which is harmful to the human body.