PM2.5 and PM10: The influence of sugarcane burning on potential cancer risk

In Brazil, sugarcane fields are often burned to facilitate manual harvesting, and this burning causes environmental pollution from the large amounts of soot released into the atmosphere. This material contains numerous organic compounds such as PAHs. In this study, the concentrations of PAHs in two particulate-matter fractions (PM_2.5 and PM₁₀) in the city of Araraquara (SE Brazil, with around 200,000 inhabitants and surrounded by sugarcane plantations) were determined during the sugarcane harvest (HV) and non-harvest (NHV) seasons in 2008 and 2009. The sampling strategy included four campaigns, with 60 samples in the NHV season and 220 samples in the HV season. The PM_2.5 and PM₁₀ fractions were collected using a dichotomous sampler (10 L min^?1, 24 h) with Teflon? filters. The filter sets were extracted (ultrasonic bath with hexane/acetone (1:1 v/v)) and analyzed by HPLC/Fluorescence. The median concentration for total PAHs (PM_2.5 in 2009) was 0.99 ng m^?3 (NHV) and 3.3 ng m^?3 (HV). In the HV season, the total concentration of carcinogenic PAHs (benz(a)anthracene, benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene) was 5 times higher than in the NHV season. B(a)P median concentrations were 0.017 ng m^?3 and 0.12 ng m^?3 for the NHV and HV seasons, respectively. The potential cancer risk associated with exposure through inhalation of these compounds was estimated based on the benzo[a]pyrene toxic equivalence (BaP_eq), where the overall toxicity of a PAH mixture is defined by the concentration of each compound multiplied by its relative toxic equivalence factor (TEF). BaP_eq median (2008 and 2009 years) ranged between 0.65 and 1.0 ng m^?3 and 1.2–1.4 ng m^?3 for the NHV and HV seasons, respectively. Considering that the maximum permissible BaP_eq in ambient air is 1 ng m^?3, related to the increased carcinogenic risk, our data suggest that the level of human exposure to PAHs in cities surrounded by sugarcane crops where the burning process is used is cause for concern.     

Estimation of economic costs of particulate air pollution from road transport in China

Valuation of health effects of air pollution is becoming a critical component of the performance of cost–benefit analysis of pollution control measures, which provides a basis for setting priorities for action. Beijing has focused on control of transport emission as vehicular emissions have recently become an important source of air pollution, particularly during Olympic games and Post-games. In this paper, we conducted an estimation of health effects and economic cost caused by road transport-related air pollution using an integrated assessment approach which utilizes air quality model, engineering, epidemiology, and economics. The results show that the total economic cost of health impacts due to air pollution contributed from transport in Beijing during 2004–2008 was 272, 297, 310, 323, 298 million US$ (mean value), respectively. The economic costs of road transport accounted for 0.52, 0.57, 0.60, 0.62, and 0.58% of annual Beijing GDP from 2004 to 2008. Average cost per vehicle and per ton of PM₁₀ emission from road transport can also be estimated as 106 US $/number and 3584 US $ t^?1, respectively. These findings illustrate that the impact of road transport contributed particulate air pollution on human health could be substantial in Beijing, whether in physical and economic terms. Therefore, some control measures to reduce transport emissions could lead to considerable economic benefit.     

Assessment of dietary exposure to PCDD/F and dioxin-like PCB in infant formulae available on the EU market

In infant period, human milk and infant formulae are the major sources of exposure to dioxins (polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (PCB). Since in many parts of Europe the mothers are increasingly reluctant to breastfeed their babies, the main objective of the present study is to assess the level of exposure of non-breast-fed infants during their early development. Consequently, the concentration levels of PCDD/F and dioxin-like PCB were determined in industrial infant formulae including "starting" (aged 0-4months) and "follow-on" (after 4months) products of milk formula, soy formula and hypoallergenic infant formula, available on the EU market. Furthermore, dietary exposure to dioxin of exclusively formula-fed infants was assessed at each month from 0 to 9months. The results suggest that dietary exposure to dioxins via formulae is higher when consuming "starting" than "follow-on" infant formulae on a body-weight basis. Estimated dietary exposure after 4months of age was always below the lowest range of the Tolerable Daily Intake (TDI) of 1pg WHO-TEQkg(-1)bwd(-1) and Provisional Tolerable Monthly Intake (PTMI) of 70pg WHO-TEQkg(-1)bwmonth(-1). The highest estimated cumulative dietary exposure to PCDD/F and dioxin-like PCB was obtained considering infants of 0-1months fed with the "starting" hypoallergenic infant formula (2.8pg WHO-TEQkg(-1)bwd(-1) and 84pg WHO-TQkg(-1)bwmonth(-1)). However, these elevated levels are much lower than those observed in some studies in breast-fed infants. The study can be used for further risk assessments in regard to infant exposure.     

Comprehensive assessment of toxic metals in urban and suburban street deposited sediments (SDSs) in the biggest metropolitan area of China

A set of toxic metals, i.e. As, Hg, Pb, Cd, Cu, Zn, Ni and Cr, in urban and suburban SDSs were investigated comparatively in the biggest metropolitan area of China, Shanghai. Results showed that all of the metals except As were accumulated greatly, much higher than background values. Geo-accumulation index indicated that metal contamination in urban SDSs was generally heavier than that in suburban SDSs. Potential ecological risk index demonstrated that overall risks caused by metals were considerable. Cd contributed 52% to the overall risk. Multivariate statistical analysis revealed that in urban SDSs, Zn, Ni, Cd, Pb, Cu and Cr were related to traffic and industry; coal combustion led to elevated levels of Hg; soil parent materials controlled As contents. In suburban SDSs, Pb, Cu, As and Cd largely originated from traffic pollution; Zn, Ni and Cr were associated with industrial contaminants; Hg was mainly from domestic solid waste.     

Metabolic diversity of the heterotrophic microorganisms and potential link to pollution of the Rouge River

The heterotrophic microbial communities of the Rouge River were tracked using Biolog Ecoplates to understand the metabolic diversity at different temporal and spatial scales, and potential link to river pollution. Site less impacted by anthrophogenic sources (site 1), showed markedly lower metabolic diversity. The only substrates that were utilized in the water samples were carbohydrates. Sites more impacted by anthrophogenic sources (sites 8 and 9) showed higher metabolic diversity. Higher functional diversity was linked to the physico-chemical and biological properties of the water samples (i.e. higher concentrations of DO, DOC, chlorophyll, and bacterial density). Biolog analysis was found to be useful in differentiating metabolic diversity between microbial communities; in determining factors that most influence the separation of communities; and in identifying which substrates were most utilized by the communities. It can also be used as an effective ecological indicator of changes in river function attributable to urbanization and pollution.     

Determination of the insecticide diflubenzuron in mushrooms by kinetic method and high-performance liquid chromatographic method

In the present study, a new sensitive and simple kinetic-spectrophotometric method for the determination of the insecticide diflubenzuron [1-(4-chlorophenyl)-3-(2,6-diflubenzoil)urea] is proposed. The method is based on the inhibited effect of diflubenzuron on the oxidation of sulphanilic acid (SA) by hydrogen peroxide in phosphate buffer in presence Cu(II) ion. Diflubenzuron was determined with linear calibration graph in the interval from 0.31 to 3.1 μg mL?1 and from 3.1 to 31.0 μg mL?1. The optimized conditions yielded a theoretical detection limit of 0.18 μg mL?1 corresponding to 0.036 mg kg(-1)mushroom sample based on the 3S(b) criterion. The RSD is 5.03-1.83 % and 2.81-0.71 % for the concentration interval of diflubenzuron 0.31-3.1 μg mL?1 and 3.1-31.0 μg mL?1, respectively. The reaction was followed spectrophotometrically at 370 nm. The kinetic parameters of the reaction are reported, and the rate equations are suggested. The developed procedure was successfully applied to the rapid determination of diflubenzuron in spiked mushroom samples of different mushroom species. The HPLC method was used like a comparative method to verify results.     

Comparison among model estimates of critical loads of acidic deposition using different sources and scales of input data

The critical load (CL) of acidic atmospheric deposition represents the load of acidity deposited from the atmosphere to the earth’s surface at which harmful acidification effects on sensitive biological receptors are thought to occur. In this study, the CL for forest soils was estimated for 27 watersheds throughout the United States using a steady-state mass balance approach based on both national and site-specific data and using different approaches for estimating base cation weathering. Results suggested that the scale and source of input data can have large effects on the calculated CL and that the most important parameter in the steady-state model used to estimate CL is base cation weathering. These results suggest that the data and approach used to estimate weathering must be robust if the calculated CL is to be useful for its intended purpose.     

Biomass fuel burning and its implications: Deforestation and greenhouse gases emissions in Pakistan

Pakistan is facing problem of deforestation. Pakistan lost 14.7% of its forest habitat between 1990 and 2005 interval. This paper assesses the present forest wood consumption rate by 6000 brick kilns established in the country and its implications in terms of deforestation and emission of greenhouse gases. Information regarding consumption of forest wood by the brick kilns was collected during a manual survey of 180 brick kiln units conducted in eighteen provincial divisions of country. Considering annual emission contributions of three primary GHGs i.e., CO₂, CH₄ and N₂O, due to burning of forest wood in brick kiln units in Pakistan and using IPCC recommended GWP indices, the combined CO₂-equivalent has been estimated to be 533019 t y⁻¹.     

Predicting molybdenum toxicity to higher plants: Estimation of toxicity threshold values

Four plant species (oilseed rape, Brassica napus L.; red clover, Trifolium pratense L.; ryegrass, Lolium perenne L.; and tomato, Lycopersicon esculentum L.) were tested on ten soils varying widely in soil properties to assess molybdenum (Mo) toxicity. A larger range (66-fold-609-fold) of added Mo concentrations resulting in 50% inhibition of yield (ED₅₀) was found among soils than among plant species (2-fold-38-fold), which illustrated that the soils differed widely in the expression of Mo toxicity. Toxicity thresholds based on soil solution Mo narrowed the variation among soils compared to thresholds based on added Mo concentrations. We conclude that plant bioavailability of Mo in soil depends on Mo solubility, but this alone did not decrease the variability in observed toxicity enough to be used in risk assessment and that other soil properties influencing Mo toxicity to plants need to be considered.